Diy Kit Capacitance Esr Inductance Resistor Lc Meter Teste Npn Pnp Mosfet M168

US $3200

  • ShenZhen ,Guangdong, China
  • Jan 29th
DIY Kit Capacitance ESR Inductance Resistor LC Meter Teste NPN PNP Mosfet M168      Details about  DIY Kit Capacitance ESR Inductance Resistor LC Meter Tester NPN PNP Mosfet M168   Features: DIY Kits, not soldered, Atmega168 has been programmed, without battery Specification: Measurment Range: Resistor:0.5 ?-50M? Capacitor:30pF-100mF Inductance:0.01MH-10H wroking voltage: can use 6FF22 9V Battery, or DC 5.5-12V via DC socket. Controller :ATmega168 Standby current: 0.02uA Operating current: 25mA Features: 1: a key measurement operation, the time delay automatically shut off the power. Shut off the current 20 na, support for battery operation. 2: the automatic detection of PNP and NPN bipolar transistor, N, P channel MOSFET, jfets field-effect tube, diode, double diode, thyristor, resistance, capacitance and inductance. Automatically detect pin definition. 3: measure the bipolar transistor current amplification coefficient (B) and emission of conduction voltage (Uf). Darlington transistors can be high threshold voltage and high current amplification factor recognition. 4: can detect the bipolar transistor and the inside of the MOSFET protection diode and display on the screen. 5: measure the MOSFET threshold voltage and gate capacitance value. 6: support two resistance measurements, potentiometer can also be measured. If one end of the potentiometer to adjust to it, the tester is unable to distinguish between the middle and at the ends of the pin. 7: the resolution of the resistance measurement is 0.1 ohms, highest measured value up to 50 m ohm. 8: pf capacitance measurement range from 25 to 100 mf (UF) 100000. Resolution can reach 1 pF. 9: can detect more than 2 uf capacitor equivalent series resistance (ESR), a resolution of 0.01 ohms. This function for detection capacitance performance is very important. 10: two diodes can be displayed in the right direction signs, also showed a positive pressure drop. 11: LED detection for diode, positive pressure drop than normal on the high side. Double light emitting diode detection for the diode. Detection of leds will shine. 12: each test time is about two seconds, only large capacitance and inductance measurement will need a long time.   Package included :  1 Meter(without the battery), DIY Kits, not soldered, Atmega168 has been programmed        SHIPPING All the items will be dispatched within 1 business day by Hong Kong Airmail after the payment is clear. Items will arrive in 7-25 business days. The arrival time depends on some factors and different areas: Please choose some local sellers, if you cannot wait patiently in the shipping time we declared. Once you purchase, please DON’T leave negative or neutral feedback if you haven’t received item in 30 days, because we have mentioned the shipping time repeatedly. Customs duty is obligation and liability of a citizen in your country, so buyer should be responsible for any tax and custom duty incurred. For example, Laser Pointer is unacceptable in some countries. Therefore, please double check your local customs policy carefully before purchase. Or, we will NOT be responsible for any failure delivery related destination customs issue. PAYMENT We accept PayPal only. We only ship item to your PayPal verified address. Payment must be received within 3 Days from the date of purchase. Please leave note in PayPal when making the payment if you have any special request (colors/size). Orders will be processed instantly and dispatched in same day normally, so we do NOT accept any Email/Message note before or after you place orders. REFUND & REPLACEMENT POLICY All the products we are selling include factory warranty, don’t cover items that have been abused, burned and damaged in any form. Please contact us via eBay Message if you have NOT received item in 30 days, we will check it with post office, and then resend or refund any missing item. In the unlikely event that your product is faulty in anyway, you must contact us ASAP and then return it within 7 Days of receipt. The postage and packaging fee will NOT be refunded. We will not be responsible for the delivery or insurance charges incurred in returning item back to us. If you return an item purchased from us, it must be back in Factory Condition. This includes packaging, inserts, manuals etc. Please allow up to 5 Working Days for us to process your returned item. FEEDBACK & CONTACT US If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week. We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box. We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem. Please DON’T leave negative or neutral feedback if you haven’t received item in 30 days, because we have mentioned the shipping time repeatedly.      On Sep-21-14 at 18:12:07 PDT, seller added the following information:

Directions

Similar products from Inductance, Capacitance, Resistance and Impendace Meters & Analyzers

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies