Dmc 64v 5-axis Machining Center

US $19000

Verona, Pennsylvania, United States
Jun 19th

Open on mobile:
QR code

Used 2002 DECKEL MAHO DMC64V Linear Drive Vertical Machining Center: To see this machine in action visit: https://youtu.be/VNo1euPRCn4 This machine is able to be viewed under power. Located in the Pittsburgh area (Verona, PA). -HIGHLIGHTS- HEIDENHAIN iTNC530 Control with Ethernet & Electronic Handwheel Linear drive (no ballscrew) in the X-Axis with rapid traverse of 2,755 ipm 30 position pick-up tool changer which can be loaded during machining time Tool changer is located behind working area to protect from emulsion &dirt Direct measuring system (Heidenhain glass scales) for maximum accuracy 15" TFT flat screen on HEIDENHAIN iTNC530 Control Made in Geretsried, Germany Build date..................................................... 12/2002 First installed new............................................ 08/2003 Only 14,179 Program run hours over the total life of the machine Only 13,925 spindle run time hours over the total life of the machine -WORKING RANGE- X axis......................................................... 25.2" (640 mm) Y axis....................................................... 23.6" (600 mm) Z axis........................................................ 19.7" (500 mm) -FEED- Feed force X/Y/Z...................................... 7,000 N Feed rate...................................................... 0.04-1,575 ipm (1-40,000 mm/min) Rapid traverse X/Y,Z................................ 2,755 ipm (70 m/min) No ballscrew in X-Axis Rapid traverse Y-Axis............................... 1,575 ipm (40 m/min) Rapid traverse Z-Axis................................ 1,575 ipm (40 m/min) Ball screw diameter/pitch (Y/Z)................ 1.57/0.6" (40/15 mm) -ACCELERATION- X-axis.............................................................................. 5 m/s2 Y-axis.............................................................................. 4 m/s2 Z-axis.............................................................................. 5 m/s2 -POSITIONING ACCURACY (ADMISSIBLE VALUE ACCORDING TO VDI/DGQ 3441) P: Y,Z-axis (direct measuring system) acc. VDI/DGQ 3441 0.0004" (0.010 mm) P: X-axis (direct measuring system) acc. VDI/DGQ 3441 0.0003" (0.008 mm) -HEIDENHAIN GLASS SCALES X/Y/Z PATH MEASURING SYSTEM (RESOLUTION)- Direct............................................................................. 0.001 mm -MAIN SPINDLE- Speed range...................................................................... 1-12,000 rpm Drive power 40% DC/continuous duty............................ 25.5/17.4 hp (19/13 kW) Torque 40% DC/continuous duty.................................... 73/51.1 ft/lbs (100/70 Nm) Tool mounting DIN 69 871-A......................................... CAT 40 Tool clamping force......................................................... 8,000 N Tool releasing force.......................................................... 13,000 N Acceleration 0-12,000 rpm............................................... 2.3 seconds Deceleration 12,000 rpm-0............................................... 1.4 seconds -PICK-UP TOOL MAGAZINE/CHANGER- Number of tools............................................................... 30 Maximum tool diameter.................................................. 3.9" (100 mm) Maximum tool diameter, vacant adjacent places............ 5.5" (140 mm) Maximum tool length..................................................... 11.8" (300 mm) Maximum tool weight.................................................... 15.4 lbs. (7 kg) Maximum loading weight of tool magazine.................. 198 lbs. (90 kg) Chip to chip time............................................................ Approximately 7 seconds -TABLE DESIGN- Clamping area with T-slots DIN 650-14……………... 33.5" x 23.6" (850 mm x 600 mm) Loading height (upper edge of table) ............................ 33.5" (850 mm) Maximum work load capacity....................................... 1,320 lbs. (600 kg) -DIRECT DRIVE NC ROTARY-TILT TABLE- C-Axis rotation range...................................................... 360 x 0.001 degree C-Axis drive.................................................................... Torque Motor C-Axis rotary speed..............................................……... 40 rpm A-Axis swivel range........................................................ Plus or minus 130 degrees A-Axis drive.................................................................... Torque Motor A-Axis swivel speed........................................................ 40 rpm Distance between trunnion flanks.................................... Approximately 19.5" (495 mm) Maximum part swing between trunnion flanks……….. Approximately 19" (483 mm) Maximum weight on trunnion table................................ Approximately 265 lbs (120 kg) Table is equipped with a EROWA Quick Chuck for fast pallet change outs -CHIP CONVEYOR WITH PAPER BAND FILTER AND THROUGH THE SPINDLE COOLANT- Capacity……….......158 gallons (600 liter) INTERLIT SPB 3/600 ND German made unit Ejection height of the chip conveyor........................ 49.2" (1,250 mm) Pump capacity external tool cooling……………10.6 gallon/min (40 l/min)29PSI(2 bar) Pump capacity spray gun…………………...13.2 gallon/min (50 l/min) 30.5 PSI (2.1 bar) Pump capacity for flushing of bed/magazine door.....23.7gal/min(90l/min)1.9bar Pump capacity for coolant thru the spindle………….......580PSI(40bar)8gal/min(30l/min) -EQUIPPED WITH- HEIDENHAIN iTNC530 CNC Control with 15" TFT flat screen monitor Heidenhain converter and Siemens drives Linear drive in X axis, ballscrews in Y & Z axes Spray gun Multi input transformer M.T.A. SRL TAE M10 Coolant Chiller Chiller for direct drive NC Rotary Tilt Table Fully enclosed work cabin RENISHAW OMP40-2 Infrared Parts Measuring Probe RENISHAW Laser tool breakage monitoring with tool length/diameter measuring TORIT Oil & Emulsion mist collector Specifications are subject to verification by buyer.