+ Post new Ad
Do All cylindrical Grinding Attachment w / Tail stock and angle plate attached, US $19000 – Picture 0
Do All cylindrical Grinding Attachment w / Tail stock and angle plate attached, US $19000 – Picture 0

Do All Cylindrical Grinding Attachment W / Tail Stock And Angle Plate Attached

US $19000

  • Largo, Florida, United States
  • Oct 30th
Open on mobile:
QR code
Do-All cylindrical Grinding attachment with tail stock. Comes in a wooden box and includes; 16 / 3C collets sizes include inch 1/16,(2) 1/8, 3/32, 3/16, 1/4, (2) 5/32, 5/16, 7/32, 7/16, 9/32, 11/32, 13/32, 15/32, 5/8, tailstock with center. headstock center with drive dog ( will swing about 3 inches), rear attachable 360 degree wheel with lock dog to hold at the desired degree, pin removable taper plate attached to bottom of unit ( I did not check though it looks like it is set to be a 5" sine bar type), can hold a 7" bar between centers and longer when using collets. This unit is at least 35 years old but looks lit it was barely used and most of the collets look like they have never been used, 115 volt motor runs great with belt adjustable speeds, looks like 3 speeds to choose from. two additional new belts are included. 

Directions

Similar products from Tools for Other Machines

Lamson Besley-Welles 1/4-18 Tangent Die Set -4 Dies

Lamson Besley-Welles 1/4-18 Tangent Die Set -4 Dies

  • Garden City, Idaho, United States
  • Oct 31st
Jones & Lamson Besley-Welles 1/2-20 Tangent Die Set (4 Dies)

Jones & Lamson Besley-Welles 1/2-20 Tangent Die Set (4 Dies)

  • Garden City, Idaho, United States
  • Oct 31st
Generic Tail Stock 3-1/2" from Base To Center

Generic Tail Stock 3-1/2" from Base To Center

  • Garden City, Idaho, United States
  • Oct 31st
Sunnen VR6500 Collet Valve Grinder .125 to .500 Range

Sunnen VR6500 Collet Valve Grinder .125 to .500 Range

  • Auburn, Washington, United States
  • Oct 31st
Dewalt DWE1622K 2-Speed Magnetic Drill Press 120 V 60 Hz 10A

Dewalt DWE1622K 2-Speed Magnetic Drill Press 120 V 60 Hz 10A

  • Highland, Indiana, United States
  • Oct 31st
Compumill 3000 CNC Vertical Milling Machine - 3 Axis CNC Control

Compumill 3000 CNC Vertical Milling Machine - 3 Axis CNC Control

  • Barrington, New Hampshire, United States
  • Oct 31st
Berco RSC1200 Core wet grinding hub/Kwik Way/Sunnen/Serdi

Berco RSC1200 Core wet grinding hub/Kwik Way/Sunnen/Serdi

  • Auburn, Washington, United States
  • Oct 30th
MACHINIST TOOLS TOOLMAKER DIE MAKER MOLD MAKER FABRICATION

MACHINIST TOOLS TOOLMAKER DIE MAKER MOLD MAKER FABRICATION

  • Winchester, Kentucky, United States
  • Oct 30th
RW Roper Whitney no. 5 JR. hand punch with 7 punches and 7 dies

RW Roper Whitney no. 5 JR. hand punch with 7 punches and 7 dies

  • Omaha, Nebraska, United States
  • Oct 30th
Gorton Pantograph RC Planes,RC Boat,Gun Smithing,Rifle,Mold Maker,Model Maker

Gorton Pantograph RC Planes,RC Boat,Gun Smithing,Rifle,Mold Maker,Model Maker

  • Manteca, California, United States
  • Oct 30th
MAC Set of 6 Roll Pin Punches

MAC Set of 6 Roll Pin Punches

  • Pontiac, Illinois, United States
  • Oct 30th
Snap-On Set of 6 Roll Pin Punches

Snap-On Set of 6 Roll Pin Punches

  • Pontiac, Illinois, United States
  • Oct 30th
Starrett Drive Pin Punch Set S248PC

Starrett Drive Pin Punch Set S248PC

  • Pontiac, Illinois, United States
  • Oct 30th
Theater Equipment - Complete Theater Setup - 35MM Simplex E7 Projectors

Theater Equipment - Complete Theater Setup - 35MM Simplex E7 Projectors

  • Tioga, Pennsylvania, United States
  • Oct 30th
LARGE LOT OF ASSORTED NEW CARBIDE INDEXABLE INSERTS SECO TOSHIBA, STELLRAM

LARGE LOT OF ASSORTED NEW CARBIDE INDEXABLE INSERTS SECO TOSHIBA, STELLRAM

  • Ellington, New York, United States
  • Oct 29th
Concrete slip forms 6ft to 40 ft in size make offer must pick up. Floating Dock

Concrete slip forms 6ft to 40 ft in size make offer must pick up. Floating Dock

  • Winston-Salem, North Carolina, United States
  • Oct 29th
WILTON TRADESMAN 6 1/2 JAW TOOL VISE No. 1765. 360 Degree swive,l Heavy Duty,.

WILTON TRADESMAN 6 1/2 JAW TOOL VISE No. 1765. 360 Degree swive,l Heavy Duty,.

  • Goose Creek, South Carolina, United States
  • Oct 29th
#SS2011 19.7" x .087" PA INDUSTRIES 15-ROLL STOCK STRAIGHTENER #27966

#SS2011 19.7" x .087" PA INDUSTRIES 15-ROLL STOCK STRAIGHTENER #27966

  • Cincinnati, Ohio, United States
  • Oct 29th
#SRA65246500 LB PA INDUSTRIES MOTORIZED STOCK REEL #27962

#SRA65246500 LB PA INDUSTRIES MOTORIZED STOCK REEL #27962

  • Cincinnati, Ohio, United States
  • Oct 29th
Mazak CNC QT 20HP Lathe Quick Turn Lathe

Mazak CNC QT 20HP Lathe Quick Turn Lathe

  • Portland, Pennsylvania, United States
  • Oct 29th

People who viewed this item also vieved

HARDINGE ASM-9B Straight and Taper Turning Slide for automatics good cond.

HARDINGE ASM-9B Straight and Taper Turning Slide for automatics good cond.

  • Arvada, Colorado, United States
  • Jan 30th
HARDINGE TOOL HOLDER LOT ASM, DSM ETC ... NO RESERVE!

HARDINGE TOOL HOLDER LOT ASM, DSM ETC ... NO RESERVE!

  • Arvada, Colorado, United States
  • Jan 30th
H&G Die Head Style TMM Size 101 1.0" SHANK

H&G Die Head Style TMM Size 101 1.0" SHANK

  • Unionville, Connecticut, United States
  • Jan 30th
ISCAR 1.125" INDEXABLE DRILL 1.25" SHANK DZ1125 4500 125 2.5 (LOC1202A) TS12

ISCAR 1.125" INDEXABLE DRILL 1.25" SHANK DZ1125 4500 125 2.5 (LOC1202A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
BILZ R-1 TAPPING ADAPTER HOLDER FOR 1/8" PIPE TAP

BILZ R-1 TAPPING ADAPTER HOLDER FOR 1/8" PIPE TAP

  • Port Richey, Florida, United States
  • Jan 30th
LOT OF 3 BILZ R-1 TAPPING ADAPTER HOLDER FOR 1/8" PIPE TAP

LOT OF 3 BILZ R-1 TAPPING ADAPTER HOLDER FOR 1/8" PIPE TAP

  • Port Richey, Florida, United States
  • Jan 30th
Intermark EDM Wire 0.10 mm

Intermark EDM Wire 0.10 mm

  • Gold Beach, Oregon, United States
  • Jan 30th
SYSTEM 3R 20 MM RIGHT ANGLE ELECTRODE HOLDER

SYSTEM 3R 20 MM RIGHT ANGLE ELECTRODE HOLDER

  • Chicago, Illinois, United States
  • Jan 30th
Isoma Centering Microscope, for System 3-R EDM

Isoma Centering Microscope, for System 3-R EDM

  • Rocky Point, New York, United States
  • Jan 30th
1998 DARLEY 55 Ton x 8' EHP-50 25/20 HYD PRESS BRAKE DA-69 8-AXIS CNC BACK GAUGE

1998 DARLEY 55 Ton x 8' EHP-50 25/20 HYD PRESS BRAKE DA-69 8-AXIS CNC BACK GAUGE

  • Harrison, New Jersey, United States
  • Jan 30th
1991 35 TON x 6' PACIFIC/TRI-ACRO HYDRA-MECH PRESS BRAKE w/HURCO 5C CNC BG

1991 35 TON x 6' PACIFIC/TRI-ACRO HYDRA-MECH PRESS BRAKE w/HURCO 5C CNC BG

  • Harrison, New Jersey, United States
  • Jan 30th
2005 HYDRA-POWER 110 TON x 8' HYDRAULIC PRESS BRAKE w/ DELEM DA-66W 6 AXIS CNC

2005 HYDRA-POWER 110 TON x 8' HYDRAULIC PRESS BRAKE w/ DELEM DA-66W 6 AXIS CNC

  • Harrison, New Jersey, United States
  • Jan 30th
Shaviv B10 9-Pack Deburring HSS Blades (151-29212) *NEW*

Shaviv B10 9-Pack Deburring HSS Blades (151-29212) *NEW*

  • Ontario, California, United States
  • Jan 30th
Shaviv B30 10-Pack Deburring HSS Blades (151-29023) *NEW*

Shaviv B30 10-Pack Deburring HSS Blades (151-29023) *NEW*

  • Ontario, California, United States
  • Jan 30th
Sunnen AN-280 Stone Support

Sunnen AN-280 Stone Support

  • Garden City, Idaho, United States
  • Jan 30th
Landis Grinding Wheel Arbor Adapter Hub Surface Universal Grinder Machinist Tool

Landis Grinding Wheel Arbor Adapter Hub Surface Universal Grinder Machinist Tool

  • Yorktown, Virginia, United States
  • Jan 30th
DAREX Drill Bit Grinder/Sharpener (SP-2000or2500?) w/Stand+3 collets 1/16" to 1"

DAREX Drill Bit Grinder/Sharpener (SP-2000or2500?) w/Stand+3 collets 1/16" to 1"

  • Albion, New York, United States
  • Jan 30th
Grinding Wheel 5" Arbor Adapter Hub Large Surface Grinder Machinist Tool Pedesta

Grinding Wheel 5" Arbor Adapter Hub Large Surface Grinder Machinist Tool Pedesta

  • Yorktown, Virginia, United States
  • Jan 30th
KDK QUICK CHANGE BORING BAR TOOL HOLDER MODEL 155P 1-1/4" CAPACITY

KDK QUICK CHANGE BORING BAR TOOL HOLDER MODEL 155P 1-1/4" CAPACITY

  • Ellington, New York, United States
  • Jan 30th
ALORIS QUICK CHANGE UNIVERSAL PARTING BLADE TOOL HOLDER MODEL AXA 7

ALORIS QUICK CHANGE UNIVERSAL PARTING BLADE TOOL HOLDER MODEL AXA 7

  • Ellington, New York, United States
  • Jan 30th
SUPER PRECISION BXA STYLE QUICK CHANGE TOOL POST

SUPER PRECISION BXA STYLE QUICK CHANGE TOOL POST

  • Ellington, New York, United States
  • Jan 30th
2007 FADAL 3016 CNC VERTICAL MACHINING CENTER

2007 FADAL 3016 CNC VERTICAL MACHINING CENTER

  • Linden, New Jersey, United States
  • Jan 30th
PRATT & WHITNEY 1" MILLING ARBOR W/ BROWN & SHARPE NO. 9 SHANK

PRATT & WHITNEY 1" MILLING ARBOR W/ BROWN & SHARPE NO. 9 SHANK

  • Ellington, New York, United States
  • Jan 30th
17 HSS BACK SPOT FACERS & 5 3MT & STRAIGHT SHANKS 1/2" TO 2" W/ 3/4" BORES

17 HSS BACK SPOT FACERS & 5 3MT & STRAIGHT SHANKS 1/2" TO 2" W/ 3/4" BORES

  • Ellington, New York, United States
  • Jan 30th
Wellsaw Bandsaw

Wellsaw Bandsaw

  • Kalamazoo, Michigan, United States
  • Jan 30th
Marvel Saw Series 15A

Marvel Saw Series 15A

  • San Diego, California, United States
  • Jan 30th
BEAUTIFUL GROB 4V-36" VERTICAL BAND SAW YEAR BUILT 1999 WITH NEW TIRES

BEAUTIFUL GROB 4V-36" VERTICAL BAND SAW YEAR BUILT 1999 WITH NEW TIRES

  • Seekonk, Massachusetts, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies