draft inducer fan for sale, brand-new and used.

This is a very lightly used Field Controls Draft Inducer/Chimney Fan that is used to create negative pressure to overcome the effects of wind, cold chimneys, insufficient chimney height or downdraft. The model is insulated to withstand peak temperatures of up to 1300 degrees Fahrenheit, and to operate continually at 900 degrees F. It works with an on/off...

For sale is a used but in excellent condition draft inducer assembly for a carrier/Bryant 90% furnace. The fan was removed due to an intermittent noise but after adding a "shim" to the top motor mount the fan ran perfectly for a week before changing the whole furnace for a different problem. Please feel free to ask any questions.

This is a used Jakel inducer draft motor removed from a working Carrier gas furnace. Motor has been tested and is in good condition, but noticed fan plastic is broken. FREE SHIPPING to the lower 48 states.

For auction is a FASCO inducer fan and motor, taken from a 2000 Lennox G26 furnace. Motor and fan are still fully functional, but the motor itself is beginning to make bearing noise. The bearing noise is not terrible, but any buyer must understand that this motor is not new and is louder than a new item.

Here is a good working fan inducer came out of a American Standard Furnace that had cracked heat exchanger .This is a 2 stage inducer motor.

inducer fan in superb condition. FASCO 702111361 Draft Inducer Blower Motor Assembly 20538701 with vacuum switch

Draft inducer fan assembly made by Fasco works great model number 70625664

FAN COVER ONLY!

Enervex EFH 200 Exhaust Fan Exclusive Closeout brought to you by Volko Supply! An economical option over a GSV or RS fan where up to 600 CFM's is required. Usage includes exhausting kitchen hoods, gas fireplaces, bathrooms and maintaining negative pressure in duct systems.

Jakel motor 120v. 3000 rpm. Fan measures 5-1/4" x 1-5/8"strong and quiet running.

You are Looking at a USED UNIVERSAL IN PIPE BOOSTER FAN WITH THE SHAFT LENGTH AND FAN SIZE AS NEAR AS I CAN TELL IT WOULD NEED A 7" OR LARGER DIA PIPE TO FIT INSIDE .115V AC MOTOR IS USED BUT RUNS GOOD . Buyer pays the Shipping from 44624 Shown on the E bay Shipping Calculator which should be close to actual . If any questions...

You are Looking at a UNIVERSAL ELECTRIC CO. ELECTRIC MOTOR MOD # JB1PO51N BLOWER MOTOR & FAN IT RUNS CW FACING FAN, 3000 RPM BALL BEARING 1/20-HP. V1.86 AMP 120V .

For Sale Fasco Draft Inducer Blower Assembly, Stock # W4 I bought brand new on 2/22/2014 as my old blower went out. Now the AO Smith water heater went out so no longer need this blower. Great working condition, I will also include the original blower for parts if requested.

Canadian Ground Shipments by Purolator Click Here for Details

Just took this blower out of a Ducane gas pack. Bearings are in good shape. Also fits some Lennox and Armstrong units.

include("http://ebay

Fits: Carrier, Bryant and Payne Model: 320725-756 (Motor HC27CB119) Condition: Used, tested,removed from a working furnace Includes: Draft Inducer Motor, Blower Wheel, Housing, Motor Fan and Starting Capacitor (Everything Pictured) Notes: It is the buyers responsibility to ensure compatibility. Sold as is and no returns

ASIN: B003UPTEW2 Product Name: 1007360 - Fasco, Heil Quaker, ICP 1/25 HP, 115V, 3450 RPM, Draft Inducer Blower Assembly Replacement Brand Name: Fasco Manufacturer: Fasco, Heil Quaker, ICP Manufacturer Part Number: 1007360 Product Type: tools Item Type Keyword: electric-fan-motors

Fasco Draft inducer blower fan replacement motor 115V 46-14N J238-087-8218. Unused old stock, Might show some surface scratches from handling. Was never installed Powered by eBay Turbo Lister The free listing tool.