Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 0

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 1

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 2

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 3

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 4

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 5

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 6

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 7

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 8

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 9

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 10

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 1/4"-3/8", US $65.00 – Picture 11

Drierite Anhydrous Saso4 Laboratory Gas Drying Unit W/hose Barbs 26800 1/4"-3/8"

US $65.00

Orem, Utah, United States
Jan 30th

Open on mobile:
QR code

Drierite Anhydrous SaSO4 Laboratory Gas Drying Unit w/Hose barbs 26800 (1/4"-3/8"i.d.) Returns: Accepted within 30 Days* / 90 Day Warranty** USED: Fully Functional, Average Signs of Use, Clean, No Major Imperfections or Cracks, O Ring Seal is in Great Condition. The DRIERITE Laboratory Air and Gas Drying unit is an all-purpose drier. This unit is suitable for most laboratory applications. It will dry air to a dew point of -100° F at atmospheric pressure or pressures up to 90 psig. A simple connection by rubber hose to the bottom inlet of the dryer provides an immediate flow of dry air or gas. This unit is also available with 1 /8 inch SS NPT fittings (Stock No. 26840). Plastic coated mounting clips may be purchased separately. Continuous flows are possible with two units in the line and the necessary valves so that the exhausted column may be refilled while the alternate column remains in use. Active Exhausted When active, Indicating DRIERITE is a distinct blue color. When exhausted, it turns pink. Note: Do not use this plastic column in the presence of vapors or liquids containing phosphate esters, synthetic lubricants, hydrocarbon solvents, methanol, acetone, lacquer solvents, or other organics. APPLICATIONS: The Laboratory Gas Drying Unit can be used anywhere to provide dry air or gas for applications such as: blanketing, sample preparation, instrument protection, reaction mixtures, purging, vacuum release, venting with dry air. Color Change The Indicating DRIERITE gives constant visual assurance of active desiccant. When active, Indicating DRIERITE is a distinct blue color. When exhausted, it turns pink. The zone between the two colors in the column may be a purple color and should be a sharp narrow band when the flow rate is at equilibrium. Regeneration will restore the drying capacity. Refilling/Regeneration The Laboratory Gas Drying Unit can be refilled with fresh DRIERITE, or the DRIERITE granules can be removed from the column and regenerated. Construction: Column is molded polycarbonate. Desiccant supports and coil spring are stainless steel. Polycarbonate cap is fitted with o-ring gasket. DRIERITE is held firmly in place between felt filters. Max working pressure: 90 psig Connections: Hose barbs for flexible tubing ( 1/4" - 3/8" i.d.) #26800 Desiccant: 1 1/4 Ib. 8 mesh Indicating DRIERITE Water capacity: 50 grams Recommended flow rate: 200 liters per hour or 0.1 scfm for maximum efficiency Pressure drop: <.01 psi at 200 lph Specification: Manufacturer: W.H Hammond Part Number: 26800 Approximate Weight: 2 lbs Dimensions: 2 5/8" x 11 3/8" Returns: Accepted within 30 Days* / 90 Day Warranty** (*30 Day Money Back Guaranty, Less Shipping & Return Service if Buyer is Not Fully Satisfied as long as all of the items are returned in the same condition as received*) (**90 Day Warranty, I Will Guaranty All Items Included in this Listing to Work as intended by OEM Specifications for No Less Than 90 Days from the Date your shipment arrives When Installed by a Licensed Professional in Accordance to Manufacturer Directions. INK / PRINTHEADS / FUSERS / TONERS & OTHER CONSUMABLES ARE NOT COVERED UNDER WARRANTY**) *** We Will Not be responsible for labor, improper installations, consequential or incidental damages in nature whether direct or indirect at any time including but not limited to any of the above guaranties or otherwise; any liability shall not exceed a full refund of the auction price. *** Shipping / Handling Charges: Shipping: Free* (*ALL 50 States, via Economy Post) We always combine shipping whether you choose Free Shipping or Elect to Upgrade. Combined Shipping will be Calculated as Follows: Base Price Size/Weight of Largest Item, plus Weight of Additional Items. I cover the first $10 of each additional item when you choose to upgrade shipping, as shipping is estimated any overpayments from shipping are notified prior to shipping & refunded when your item is delivered. Handling: Free As Always

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“USED: Fully Functional, Average Signs of Use, Clean, No Major Imperfections or Cracks, O Ring Seal is in Great Condition.”