+ Post new Ad
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 0
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 1
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 2
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 3
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 4
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 5
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 6
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 0
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 1
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 2
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 3
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 4
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 5
drill bit lot of 12 mixed 2 flute 5/16 1/4 ptd q i 3 21 osg tin coated new e, US $40.00 – Picture 6

Drill Bit Lot Of 12 Mixed 2 Flute 5/16 1/4 Ptd Q I 3 21 Osg Tin Coated New E

US $40.00

  • Carterville, Illinois, United States
  • Jan 30th
Open on mobile:
QR code
NEW LOT OF 12 MIXED DRILL BITS 5X PTD USA HSS EXTENDED LENGTH BITS 2 FLUTE 4X 5/16 6 1/2 INCHES LONG 1X 1/4 6 INCHES LONG 7X OSG JAPAN HSS TIN COATED 2 FLUTE 1X  Q .332 INCH 5 3/8 OAL 3/8 SHANK 3X I .271 INCH 4 3/4 OAL 3/8 SHANK 2X 3 .212 INCH 4 3/8 OAL 1/4 SHANK   1X 21 .157 INCH 3 5/8 OAL 3/16 SHANK UNKNOWN AGE ON LISTINGS WITH MORE THAN 1 AVALIBLE YOU MAY NOT RECIEVE THE EXACT ONE PICTURED DONT FORGET TO CHECK OUT MY STORE AND OTHER GREAT ITEMS On Aug-08-12 at 13:52:57 PDT, seller added the following information: FREE! Sellers: Add a FREE map to your listings. FREE! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand mixed lot osg and ptd

Directions

Similar products from Sets of Mixed Drills

Double End Brubaken Drill bits 5/8 HNA I5

Double End Brubaken Drill bits 5/8 HNA I5

  • Seymour, Tennessee, United States
  • Jan 30th
Mini Twist Drill Bits 0.7mm 0.8mm 1.0mm 1.2mm 1.4mm each size 2pcs for pcb

Mini Twist Drill Bits 0.7mm 0.8mm 1.0mm 1.2mm 1.4mm each size 2pcs for pcb

  • ???, ???, China
  • Jan 30th
M.A.FORD 4 PC Single Flute Angle: 82° 1/4",1/2",3/4" & 1"

M.A.FORD 4 PC Single Flute Angle: 82° 1/4",1/2",3/4" & 1"

  • Flushing, New York, United States
  • Jan 30th
KEO Zero Flute M35 Cobalt Countersinks 1/4", 1/4", 5/16", 3/8" 82°

KEO Zero Flute M35 Cobalt Countersinks 1/4", 1/4", 5/16", 3/8" 82°

  • Flushing, New York, United States
  • Jan 30th
KEO Zero Flute M35 Cobalt Countersinks 1/4", 1/4", 5/16", 3/8" 90°

KEO Zero Flute M35 Cobalt Countersinks 1/4", 1/4", 5/16", 3/8" 90°

  • Flushing, New York, United States
  • Jan 30th
M.A.FORD 6 Flute Sets 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" & 1" 82° 7PC

M.A.FORD 6 Flute Sets 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" & 1" 82° 7PC

  • Flushing, New York, United States
  • Jan 30th
M.A.FORD 4 PC Single Flute 1/4",1/2",3/4" & 1" Angle: 90°

M.A.FORD 4 PC Single Flute 1/4",1/2",3/4" & 1" Angle: 90°

  • Flushing, New York, United States
  • Jan 30th
MACHINISTS LOT OF 24 pcs Includes Drills, End Mills as shown

MACHINISTS LOT OF 24 pcs Includes Drills, End Mills as shown

  • Dearborn, Michigan, United States
  • Jan 30th
Easy-To-Use Coconut Opener/Drill (Buy 2, Get 1 Free!)

Easy-To-Use Coconut Opener/Drill (Buy 2, Get 1 Free!)

  • La Puente, California, United States
  • Jan 30th
5pcs cobalt drill bit 2.2mm Co steel alloys Straight Shank Twist Drill

5pcs cobalt drill bit 2.2mm Co steel alloys Straight Shank Twist Drill

  • China, China
  • Jan 30th
LOT OF 3 PTD PRECISION TWIST DRILL CARBIDE TIP MASONRY BIT 1/2 - 1/2 - 1/2

LOT OF 3 PTD PRECISION TWIST DRILL CARBIDE TIP MASONRY BIT 1/2 - 1/2 - 1/2

  • Palmer, Massachusetts, United States
  • Jan 30th
National Twist Drill A Tool (INV 21065)

National Twist Drill A Tool (INV 21065)

  • Portland, Connecticut, United States
  • Jan 30th
4 LOT SANDVIK COROMANT CARBIDE TWIST DRILL+CENTER BIT W/COOLANT RA216 R215 R840

4 LOT SANDVIK COROMANT CARBIDE TWIST DRILL+CENTER BIT W/COOLANT RA216 R215 R840

  • mississauga, Ontario, Canada
  • Jan 30th
Lot of (4) drill bits (Inv.31385)

Lot of (4) drill bits (Inv.31385)

  • Portland, Connecticut, United States
  • Jan 30th
MAGAFOR FRANCE CARBIDE TWIST NC SPOT DRILL+CENTER 20mm.787" COBALT HSS_Co M35

MAGAFOR FRANCE CARBIDE TWIST NC SPOT DRILL+CENTER 20mm.787" COBALT HSS_Co M35

  • mississauga, Ontario, Canada
  • Jan 30th
5lb Drill Bits Approx.. 360 bit < 1" to 3" Assorted Sizes mixed lot USA

5lb Drill Bits Approx.. 360 bit < 1" to 3" Assorted Sizes mixed lot USA

  • Goddard, Kansas, United States
  • Jan 30th
M.A.FORD 4 PC Single Flute 1/4&#034;,1/2&#034;,3/4&#034; &amp; 1&#034; Angle: 60°

M.A.FORD 4 PC Single Flute 1/4",1/2",3/4" & 1" Angle: 60°

  • Flushing, New York, United States
  • Jan 30th
14 MISC. USED STRAIGHT SHANK DRILLS HSS USA 1-3/8&#034; TO 25/32&#034; NO JUNK 1690

14 MISC. USED STRAIGHT SHANK DRILLS HSS USA 1-3/8" TO 25/32" NO JUNK 1690

  • Tekamah, Nebraska, United States
  • Jan 30th
15 NEW Drill Bits Shook Carbide Tipped Masonry Real McCoy HSS NEW

15 NEW Drill Bits Shook Carbide Tipped Masonry Real McCoy HSS NEW

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Lot of (4) 17/32 drill bits (Inv.31660)

Lot of (4) 17/32 drill bits (Inv.31660)

  • Portland, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

Cle-Line EXT Drill Bit 3/8 X 12 A/C

Cle-Line EXT Drill Bit 3/8 X 12 A/C

  • Decatur, Alabama, United States
  • May 30th
Hannibal Carbide 9/32&#034; x 4-1/2&#034; x 6-1/4&#034; Drill 65018 (two drills) NEW

Hannibal Carbide 9/32" x 4-1/2" x 6-1/4" Drill 65018 (two drills) NEW

  • Atwater, Ohio, United States
  • May 30th
Michigan Drill 23/64&#034; Super Cobalt Heavy Duty Taper Length 135 Split point

Michigan Drill 23/64" Super Cobalt Heavy Duty Taper Length 135 Split point

  • Atwater, Ohio, United States
  • May 30th
LOT OF PRECISION HSS S&amp;D REDUCED SHANK PILOTED DRILLS 1-1/16&#034; TO 1-3/4&#034;

LOT OF PRECISION HSS S&D REDUCED SHANK PILOTED DRILLS 1-1/16" TO 1-3/4"

  • La Puente, California, United States
  • Jun 2nd
LOT OF PRECISION HSS TAPPERED DRILLS 1/2&#034; TO 1&#034;

LOT OF PRECISION HSS TAPPERED DRILLS 1/2" TO 1"

  • La Puente, California, United States
  • Jun 2nd
LOT OF PRECISION HSS TAPPERED DRILLS 1/2&#034; TO 3/4&#034;

LOT OF PRECISION HSS TAPPERED DRILLS 1/2" TO 3/4"

  • La Puente, California, United States
  • Jun 2nd
WALTER TITEX Micro Drill, Size 0.46mm, Solid Carbide, Uncoated, List# A3162-0.46

WALTER TITEX Micro Drill, Size 0.46mm, Solid Carbide, Uncoated, List# A3162-0.46

  • Elyria, Ohio, United States
  • Jun 2nd
1 PAIR OF 5/32&#034; 2-FLUTE SOLID CARBIDE DRILLS

1 PAIR OF 5/32" 2-FLUTE SOLID CARBIDE DRILLS

  • Addison, Illinois, United States
  • Jun 2nd
Garr Tool Solid Carbide 21/64&#034; Stub Drill, 1520H, 77651

Garr Tool Solid Carbide 21/64" Stub Drill, 1520H, 77651

  • Abingdon, Maryland, United States
  • Jun 2nd
OSG Screw Machine Length Drill Bit 5.25mm 0.2067&#034; 120d V-HSS TiN [Z12]

OSG Screw Machine Length Drill Bit 5.25mm 0.2067" 120d V-HSS TiN [Z12]

  • Saint Louis, Missouri, United States
  • Jun 3rd
.3860&#034; W HSCO 135 DEGREE SPLIT POINT STUB DRILL

.3860" W HSCO 135 DEGREE SPLIT POINT STUB DRILL

  • Petaluma, California, United States
  • Jun 4th
.3750&#034; 3/8&#034; HIGH SPEED STEEL SPLIT POINT STUB LENGTH DRILL BRIGHT FINISH USA!

.3750" 3/8" HIGH SPEED STEEL SPLIT POINT STUB LENGTH DRILL BRIGHT FINISH USA!

  • Petaluma, California, United States
  • Jun 4th
Mist Coolant Lubrication Spray System Unit for CNC Lathe Milling Machine

Mist Coolant Lubrication Spray System Unit for CNC Lathe Milling Machine

  • La Puente, California, United States
  • Jun 4th
Ingersoll Square Insert Indexable Drill COOLANT FED Q0191076Q5R01

Ingersoll Square Insert Indexable Drill COOLANT FED Q0191076Q5R01

  • Naperville, Illinois, United States
  • Jun 4th
Ingersoll Square Insert Indexable Drill COOLANT FED Q0135027N5R01 0.531&#034;

Ingersoll Square Insert Indexable Drill COOLANT FED Q0135027N5R01 0.531"

  • Naperville, Illinois, United States
  • Jun 4th
&#034;ATM&#034; Twist Drill Bits 9/32&#034;, Lot of 2 Pcs

"ATM" Twist Drill Bits 9/32", Lot of 2 Pcs

  • Coventry, Rhode Island, United States
  • Jun 6th
8- New American made 1/4&#034; Hole saw drills

8- New American made 1/4" Hole saw drills

  • Leland, Illinois, United States
  • Jun 6th
Bosch CO2155 7/16-Inch Cobalt SP Jobber Drill Bit

Bosch CO2155 7/16-Inch Cobalt SP Jobber Drill Bit

  • USA, United States
  • Jun 6th
NACHI 1372887 8% Cobalt AG Coated Power Long Drill

NACHI 1372887 8% Cobalt AG Coated Power Long Drill

  • Duncan, South Carolina, United States
  • Jun 7th
NACHI 1373190 8% Cobalt AG Coated Power Long Drill

NACHI 1373190 8% Cobalt AG Coated Power Long Drill

  • Duncan, South Carolina, United States
  • Jun 7th
NACHI 1372864 8% Cobalt AG Coated Power Long Drill

NACHI 1372864 8% Cobalt AG Coated Power Long Drill

  • Duncan, South Carolina, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies