+ Post new Ad
DRILL GRINDER ATTACHMENT - AMT A614, US $5300 – Picture 0
DRILL GRINDER ATTACHMENT - AMT A614, US $5300 – Picture 1
DRILL GRINDER ATTACHMENT - AMT A614, US $5300 – Picture 2
DRILL GRINDER ATTACHMENT - AMT A614, US $5300 – Picture 3
DRILL GRINDER ATTACHMENT - AMT A614, US $5300 – Picture 4
DRILL GRINDER ATTACHMENT - AMT A614, US $5300 – Picture 0
DRILL GRINDER ATTACHMENT - AMT A614, US $5300 – Picture 1
DRILL GRINDER ATTACHMENT - AMT A614, US $5300 – Picture 2
DRILL GRINDER ATTACHMENT - AMT A614, US $5300 – Picture 3
DRILL GRINDER ATTACHMENT - AMT A614, US $5300 – Picture 4

Drill Grinder Attachment - Amt A614

US $5300

  • Plymouth, Massachusetts, United States
  • Jun 9th
Open on mobile:
QR code
An older   drill grinding attachment in little used condition. Label plate reads "AMT A614" (American Machine and Tool Co.). Circa 1983.  For use with a bench grinder using a side cutting  wheel. Do not use the side of a regular wheel.  Comes with   the original instructions. For drill bits 1/8" - 3/4" (3mm - 19mm) . Shipping weight is 38 ounces. Will send Priority, small flat  rate Priority or Standard post, which ever is less at the online rate. 

Directions

Similar products from Toold for Grinding Machines

Rockwell 10" x 5" Surface Grinder 3PH

Rockwell 10" x 5" Surface Grinder 3PH

  • Stone Mountain, Georgia, United States
  • Jun 9th
CutterMaster End Mill & Tool Sharpener HDT-30

CutterMaster End Mill & Tool Sharpener HDT-30

  • Spartanburg, South Carolina, United States
  • Jun 9th
Weldon Tool End Mill Tooling Air Sharpening Fixture

Weldon Tool End Mill Tooling Air Sharpening Fixture

  • Ossian, Indiana, United States
  • Jun 9th
Norton 5" orbital sandpaper 220 grit hook it

Norton 5" orbital sandpaper 220 grit hook it

  • Port Saint Lucie, Florida, United States
  • Jun 9th
Norton 5" orbital sandpaper 320 grit hook it

Norton 5" orbital sandpaper 320 grit hook it

  • Port Saint Lucie, Florida, United States
  • Jun 9th
Precision Diamond Tipped Wheel Dressers (2)

Precision Diamond Tipped Wheel Dressers (2)

  • Springfield, Ohio, United States
  • Jun 9th
moore jig grinder #2 with Sony dros

moore jig grinder #2 with Sony dros

  • Sonora, California, United States
  • Jun 9th
TORIT DONALDSON # 54 CABINET DUST COLLECTOR - 1/3hp

TORIT DONALDSON # 54 CABINET DUST COLLECTOR - 1/3hp

  • La Puente, California, United States
  • Jun 9th
Chicago Pneumatic Air Sander / Grinder no guard 90 psi rating

Chicago Pneumatic Air Sander / Grinder no guard 90 psi rating

  • Florence, Colorado, United States
  • Jun 9th
SAIT Z16 ZIRCONIUM GRINDING CUP STONE w BACK 5"x2"x5/8"-11 Metal/Stainless 26053

SAIT Z16 ZIRCONIUM GRINDING CUP STONE w BACK 5"x2"x5/8"-11 Metal/Stainless 26053

  • Pequannock, New Jersey, United States
  • Jun 9th
GLENDO ACCU-FINISH SERIES 2 CARBIDE GRINDER, LAPPER WITH CABINET, LIGHT, 1200 G

GLENDO ACCU-FINISH SERIES 2 CARBIDE GRINDER, LAPPER WITH CABINET, LIGHT, 1200 G

  • Cottage Grove, Minnesota, United States
  • Jun 9th
Flex LW 1302 Heavy Duty Hand Held Electric Water Feed Grinder, Sander

Flex LW 1302 Heavy Duty Hand Held Electric Water Feed Grinder, Sander

  • Collierville, Tennessee, United States
  • Jun 9th
GRINDING DOG LOT GRINDER DOGS + #2 MORES TAPER DEAD CENTER RED-E-TOOL

GRINDING DOG LOT GRINDER DOGS + #2 MORES TAPER DEAD CENTER RED-E-TOOL

  • Rockford, Illinois, United States
  • Jun 9th
Tru-Dex Wheel Dresser

Tru-Dex Wheel Dresser

  • Crystal Lake, Illinois, United States
  • Jun 9th
PILE OF STEEL METAL PLATE SETUP JIGS FIXTURES FROM SHOP WITH MOORE JIG GRINDER A

PILE OF STEEL METAL PLATE SETUP JIGS FIXTURES FROM SHOP WITH MOORE JIG GRINDER A

  • Waterford, Michigan, United States
  • Jun 9th
PILE OF STEEL METAL PLATE SETUP JIGS FIXTURES FROM SHOP WITH MOORE JIG GRINDER B

PILE OF STEEL METAL PLATE SETUP JIGS FIXTURES FROM SHOP WITH MOORE JIG GRINDER B

  • Waterford, Michigan, United States
  • Jun 9th
PILE OF STEEL METAL PLATE SETUP JIGS FIXTURES FROM SHOP WITH MOORE JIG GRINDER C

PILE OF STEEL METAL PLATE SETUP JIGS FIXTURES FROM SHOP WITH MOORE JIG GRINDER C

  • Waterford, Michigan, United States
  • Jun 9th
PILE OF STEEL METAL PLATE SETUP JIGS FIXTURES FROM SHOP WITH MOORE JIG GRINDER D

PILE OF STEEL METAL PLATE SETUP JIGS FIXTURES FROM SHOP WITH MOORE JIG GRINDER D

  • Waterford, Michigan, United States
  • Jun 9th
CR CHICAGO RAWHIDE SKF TIMKIN SEALS SLEEVES BEARINGS MACHINE SHOP PARTS

CR CHICAGO RAWHIDE SKF TIMKIN SEALS SLEEVES BEARINGS MACHINE SHOP PARTS

  • Waterford, Michigan, United States
  • Jun 9th
NEW OLD STOCK SKF 5210 A-2RS1/C3 BALL BEARING FROM GRINDING / MACHINE SHOP

NEW OLD STOCK SKF 5210 A-2RS1/C3 BALL BEARING FROM GRINDING / MACHINE SHOP

  • Waterford, Michigan, United States
  • Jun 9th

People who viewed this item also vieved

GEOMETRIC 11/32"-20 PROJECTED CHASERS FOR 5/16" D, DS, DSA, 5 HOOK, 22 CHAMFER

GEOMETRIC 11/32"-20 PROJECTED CHASERS FOR 5/16" D, DS, DSA, 5 HOOK, 22 CHAMFER

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC 3/8"-18 LEFT HAND MILLED CHASERS FOR 9/16" D, DS, DSA

GEOMETRIC 3/8"-18 LEFT HAND MILLED CHASERS FOR 9/16" D, DS, DSA

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC .152-36 MILLED CHASERS FOR 5/16" D, DS, DSA, 10 HOOK, 33 CHAMFER

GEOMETRIC .152-36 MILLED CHASERS FOR 5/16" D, DS, DSA, 10 HOOK, 33 CHAMFER

  • Fox Lake, Illinois, United States
  • Jan 30th
DoAll Drill Single Spindle 17" No. DG-17 Gear Head 150-2000 RPM Clean (27083)

DoAll Drill Single Spindle 17" No. DG-17 Gear Head 150-2000 RPM Clean (27083)

  • Cincinnati, Ohio, United States
  • Jan 30th
Carlton Radial Drill 6'x17" No. 3A, 15-1500 RPM, 6 M.T., Box Table, Nice (24569)

Carlton Radial Drill 6'x17" No. 3A, 15-1500 RPM, 6 M.T., Box Table, Nice (24569)

  • Cincinnati, Ohio, United States
  • Jan 30th
Delta Rockwell Unidrill Drill No. 15-665 1/2 HP, 1750 RPM (27066)

Delta Rockwell Unidrill Drill No. 15-665 1/2 HP, 1750 RPM (27066)

  • Cincinnati, Ohio, United States
  • Jan 30th
SYSTEM 3R-SP4800 EDM PARTIAL SET ELECTRODE 6PC 06275

SYSTEM 3R-SP4800 EDM PARTIAL SET ELECTRODE 6PC 06275

  • Beltsville, Maryland, United States
  • Jan 30th
Sodick UV Drive-A UV 1 GA2575 EDM Board

Sodick UV Drive-A UV 1 GA2575 EDM Board

  • Archbold, Ohio, United States
  • Jan 30th
3-5 micron Mann Long Life Wire EDM Filter 340mmx 450mm Charmilles H34.1780/2

3-5 micron Mann Long Life Wire EDM Filter 340mmx 450mm Charmilles H34.1780/2

  • Irvine, California, United States
  • Jan 30th
No. 975 Pexto Base For Roll Forming Machine Beading Crimping Sheetmetal

No. 975 Pexto Base For Roll Forming Machine Beading Crimping Sheetmetal

  • Ottawa, Illinois, United States
  • Jan 30th
New European 90 deg. bottom die Press Brake Tooling

New European 90 deg. bottom die Press Brake Tooling

  • Gibbon, Minnesota, United States
  • Jan 30th
WACHS END PREP BITS

WACHS END PREP BITS

  • Salinas, California, United States
  • Jan 30th
Desco pneumatic 4.5” sander with dust shroud.

Desco pneumatic 4.5” sander with dust shroud.

  • Temecula, California, United States
  • Jan 30th
1pc Shaviv Blade Holder C Holds all C40 & C42 Scraper Blades Part #29001

1pc Shaviv Blade Holder C Holds all C40 & C42 Scraper Blades Part #29001

  • Seminole, Florida, United States
  • Jan 30th
Used Roto-Finish ST-12 Vibratory Finisher

Used Roto-Finish ST-12 Vibratory Finisher

  • Cambridge, Minnesota, United States
  • Jan 30th
Monarch Engine Lathe 2013 x 54 Model 62

Monarch Engine Lathe 2013 x 54 Model 62

  • Congers, New York, United States
  • Jan 30th
UNIMAT SL1000 / DB200 LATHE TOOL POST

UNIMAT SL1000 / DB200 LATHE TOOL POST

  • Hillsborough, New Jersey, United States
  • Jan 30th
UNIMAT SL1000 / DB200 LATHE THREADED ADAPTORS 1 x 12

UNIMAT SL1000 / DB200 LATHE THREADED ADAPTORS 1 x 12

  • Hillsborough, New Jersey, United States
  • Jan 30th
INGERSOLL 6X4S04R02

INGERSOLL 6X4S04R02

  • Elkhart Lake, Wisconsin, United States
  • Jan 30th
4.0 " Ingersoll Indexable Face Mill 6K6V-04L01

4.0 " Ingersoll Indexable Face Mill 6K6V-04L01

  • Elkhart Lake, Wisconsin, United States
  • Jan 30th
new nmtb 40 horizontal milling machine arbor 7/8''

new nmtb 40 horizontal milling machine arbor 7/8''

  • Millstadt, Illinois, United States
  • Jan 30th
Doall Automatic Horizontal Cut-Off Bandsaw, Year 1990

Doall Automatic Horizontal Cut-Off Bandsaw, Year 1990

  • Watertown, Connecticut, United States
  • Jan 30th
Diacro Mechanical Shear Model 48 - 4' 16 gauge

Diacro Mechanical Shear Model 48 - 4' 16 gauge

  • Lynnwood, Washington, United States
  • Jan 30th
Wysong CNC Hydraulic Shear Model H-2510

Wysong CNC Hydraulic Shear Model H-2510

  • Watertown, Connecticut, United States
  • Jan 30th
IMET / KALAMAZOOO FERROUS COLD SAW (330)

IMET / KALAMAZOOO FERROUS COLD SAW (330)

  • Odessa, Florida, United States
  • Jan 30th
DELTA 10" Unisaw Table Saw, #34-807 (325)

DELTA 10" Unisaw Table Saw, #34-807 (325)

  • Odessa, Florida, United States
  • Jan 30th
DELTA 14" Radial Arm Saw, #33-081 (326)

DELTA 14" Radial Arm Saw, #33-081 (326)

  • Odessa, Florida, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies