+ Post new Ad
Drillco 2900 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round, C $51.80 – Picture 0
Drillco 2900 Series High-Speed Steel Tap, Uncoated (Bright) Finish, Round, C $51.80 – Picture 0

Drillco 2900 Series High-speed Steel Tap, Uncoated (bright) Finish, Round

C $51.80

  • Commerce, CA, United States
  • Jul 29th
Open on mobile:
QR code
Drillco nominal size of a taper pipe tap (NPT) is that of the pipe fitting to be tapped, not the actual size of the tap. High-speed steel tools are good for most general Purpose applications, Offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Comes with round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
EAN 0045996993431
MPN N/A
UPC 0045996993431
Brand Drillco
ISBN N/A

Directions

Similar products from Other Drilling Tools

Lot of 11 Brass Finish Drill Bits. Machinist. Flat Ends - End Mill??.

Lot of 11 Brass Finish Drill Bits. Machinist. Flat Ends - End Mill??.

  • Decatur, Arkansas, United States
  • Jul 29th
Triumph 99833 1/16"-1/2" Black HSS Twist Drill Bit Set (29-piece)

Triumph 99833 1/16"-1/2" Black HSS Twist Drill Bit Set (29-piece)

  • Millbrae, California, United States
  • Jul 29th
2 New 1 3/8 Spade Drill Inserts 1.375

2 New 1 3/8 Spade Drill Inserts 1.375

  • Nanticoke, Pennsylvania, United States
  • Jul 29th
1 13/32 Allied Machine Spade Drill Insert

1 13/32 Allied Machine Spade Drill Insert

  • Nanticoke, Pennsylvania, United States
  • Jul 29th
Dms731100 112" X 18" Ship Auger Bit Dms Se

Dms731100 112" X 18" Ship Auger Bit Dms Se

  • Joliet, Illinois, United States
  • Jul 29th
(1) Kennametal KSE 01250 KC630 Solid Carbide Drill

(1) Kennametal KSE 01250 KC630 Solid Carbide Drill

  • Orangeburg, South Carolina, United States
  • Jul 29th
KENNAMETAL KF2X200W1304S075L157 FACE MILL W/ COOLANT HOLE 2"

KENNAMETAL KF2X200W1304S075L157 FACE MILL W/ COOLANT HOLE 2"

  • Leander, Texas, United States
  • Jul 29th
KENNAMETAL 3.76102R058V HTS ADJUSTABLE DRILL HEAD

KENNAMETAL 3.76102R058V HTS ADJUSTABLE DRILL HEAD

  • Leander, Texas, United States
  • Jul 29th
(1.1cm x 30cm ) - 1.1cm x 30cm HSS Extra Long Drill Bit, Straight Shank,

(1.1cm x 30cm ) - 1.1cm x 30cm HSS Extra Long Drill Bit, Straight Shank,

  • Commerce, CA, United States
  • Jul 29th
(1.2cm x 30cm ) - 1.2cm x 30cm HSS Extra Long Drill Bit, Straight Shank,

(1.2cm x 30cm ) - 1.2cm x 30cm HSS Extra Long Drill Bit, Straight Shank,

  • Commerce, CA, United States
  • Jul 29th
KBC 1.1/4 TAPER SHANK 4 FLUTE HIGH SPEED STEEL CORE DRILL

KBC 1.1/4 TAPER SHANK 4 FLUTE HIGH SPEED STEEL CORE DRILL

  • Sterling Heights, Michigan, United States
  • Jul 29th
KBC 36MM TAPER SHANK 4 FLUTE HIGH SPEED STEEL CORE DRILL

KBC 36MM TAPER SHANK 4 FLUTE HIGH SPEED STEEL CORE DRILL

  • Sterling Heights, Michigan, United States
  • Jul 29th
(4) Mitsubishi 7/32 WStar Solid Carbide Drill 15xD Thru Coolant MVS0556X15S060

(4) Mitsubishi 7/32 WStar Solid Carbide Drill 15xD Thru Coolant MVS0556X15S060

  • Fort Thomas, Kentucky, United States
  • Jul 28th
Guhring 2.5mm Solid Carbide Drill Coolant Through 6412 Series 15xD 9064120025000

Guhring 2.5mm Solid Carbide Drill Coolant Through 6412 Series 15xD 9064120025000

  • Fort Thomas, Kentucky, United States
  • Jul 28th
Guhring 2.1mm Solid Carbide Drill Coolant Through 6408 Series 8xD 9064080021000

Guhring 2.1mm Solid Carbide Drill Coolant Through 6408 Series 8xD 9064080021000

  • Fort Thomas, Kentucky, United States
  • Jul 28th
Sandvik 880-D3700C5-03 CoroDrill indexable insert drill 37mm

Sandvik 880-D3700C5-03 CoroDrill indexable insert drill 37mm

  • Lynnville, Iowa, United States
  • Jul 28th
Sandvik Coromant 880-D4000C5-03

Sandvik Coromant 880-D4000C5-03

  • Lynnville, Iowa, United States
  • Jul 28th
ULTRA TOOL 510 17/64   118 PT CARB JOBBER DRILL BIT #51017

ULTRA TOOL 510 17/64   118 PT CARB JOBBER DRILL BIT #51017

  • Brooklyn, New York, United States
  • Jul 28th
Vintage Used HUOT drill set with 37 in a metal box, made in USA, classic.

Vintage Used HUOT drill set with 37 in a metal box, made in USA, classic.

  • Howell, Michigan, United States
  • Jul 28th
Metal Removal .5709 (14.5mm) Carbide Drill TIN

Metal Removal .5709 (14.5mm) Carbide Drill TIN

  • Romeoville, Illinois, United States
  • Jul 28th

People who viewed this item also vieved

ingersoll cutting tool drill B06202521RS1 .625 DRILL

ingersoll cutting tool drill B06202521RS1 .625 DRILL

  • Advance, North Carolina, United States
  • Jan 30th
ingersoll cutting tool drill B07503021RS1 .750 DRILL

ingersoll cutting tool drill B07503021RS1 .750 DRILL

  • Advance, North Carolina, United States
  • Jan 30th
MITSUBISHI SOLID CARBIDE DRILL MWS0125LB VP15TF

MITSUBISHI SOLID CARBIDE DRILL MWS0125LB VP15TF

  • Advance, North Carolina, United States
  • Jan 30th
Michigan Drill 208B, 1/8", 10" OAL, HSS Extra Length Drill Bits - 10 each

Michigan Drill 208B, 1/8", 10" OAL, HSS Extra Length Drill Bits - 10 each

  • Chillicothe, Missouri, United States
  • Jan 30th
1/16" (.0625") x 6" Long Aircraft Extension HSS Drill - 682-0625

1/16" (.0625") x 6" Long Aircraft Extension HSS Drill - 682-0625

  • Arlington, Texas, United States
  • Jan 30th
New # 13 (.185") High Speed Cobalt Screw Machine Drills 302-5113 - Lot Of 2

New # 13 (.185") High Speed Cobalt Screw Machine Drills 302-5113 - Lot Of 2

  • Arlington, Texas, United States
  • Jan 30th
HUOT CARBIDE CUTTING TOOL INSERTS DISPENSER (ORGANIZER) CABINET 13650 "NEW"

HUOT CARBIDE CUTTING TOOL INSERTS DISPENSER (ORGANIZER) CABINET 13650 "NEW"

  • Eastlake, Ohio, United States
  • Jan 30th
OSG EX-GDR 5.3mm TIN COATED JOBBER BITS #60553 - LOT OF 5 ~ NEW & SEALED

OSG EX-GDR 5.3mm TIN COATED JOBBER BITS #60553 - LOT OF 5 ~ NEW & SEALED

  • Saint Paul, Indiana, United States
  • Jan 30th
1 new M.A. FORD 5/16" 3XD TiN Screw Machine Length 135° Carbide Hi-Tuff Drill

1 new M.A. FORD 5/16" 3XD TiN Screw Machine Length 135° Carbide Hi-Tuff Drill

  • United States
  • Jan 30th
5/8" DEMING SCREW MACHINE DRILL PRECISION TWIST DRILL CO. #1979

5/8" DEMING SCREW MACHINE DRILL PRECISION TWIST DRILL CO. #1979

  • Resaca, Georgia, United States
  • Jan 30th
DEMING SCREW MACHINE STEPPER DRILL 17MM - 17.5MM #1986

DEMING SCREW MACHINE STEPPER DRILL 17MM - 17.5MM #1986

  • Resaca, Georgia, United States
  • Jan 30th
No. 13 Screw machine drill bit 135 degree Type C split point style 43-C 11 pcs

No. 13 Screw machine drill bit 135 degree Type C split point style 43-C 11 pcs

  • Punta Gorda, Florida, United States
  • Jan 30th
NEW CARBRO CORP DRILL BIT EXTRA LONG 9"SOLID CARBIDE .2005

NEW CARBRO CORP DRILL BIT EXTRA LONG 9"SOLID CARBIDE .2005

  • Toms River, New Jersey, United States
  • Jan 30th
PTD51008 1/8 Taper Length Drill, Extra Long Drill, NO RESERVE! 2 each

PTD51008 1/8 Taper Length Drill, Extra Long Drill, NO RESERVE! 2 each

  • Riverton, Utah, United States
  • Jan 30th
Manchester Separator Cut Off Blade for 3/16" Carbide Inserts 339-140 (E889)

Manchester Separator Cut Off Blade for 3/16" Carbide Inserts 339-140 (E889)

  • Dallas, Texas, United States
  • Jan 30th
GTD 3/4" x 17-1/2" HSS HEAVY DUTY EXTRA LENGTH 2 MT TAPER SHANK DRILL

GTD 3/4" x 17-1/2" HSS HEAVY DUTY EXTRA LENGTH 2 MT TAPER SHANK DRILL

  • Chino, California, United States
  • Jan 30th
CLE-FORGE 17/32" x 14" HSS HEAVY DUTY EXTRA LENGTH 2 MT TAPER SHANK DRILL

CLE-FORGE 17/32" x 14" HSS HEAVY DUTY EXTRA LENGTH 2 MT TAPER SHANK DRILL

  • Chino, California, United States
  • Jan 30th
Precision Twist Drill 51036 - R51 9/16 PTD BRIGHT TL DRILL

Precision Twist Drill 51036 - R51 9/16 PTD BRIGHT TL DRILL

  • Joliet, Illinois, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies