Ds350gw Display And A2b Switch 31-002-06-0011

US $6,000.00

  • port harcourt, Rivers State, Nigeria
  • Jun 9th
THE HIRSCHMANN PAT DS350GW LOAD MOMENT INDICATOR SYSTEM CONSISTS OF A CENTRAL MICROPROCESSOR UNIT, OPERATOR’S CONSOLE, AND COMPONENT SENSORS FOR ANGLE, LOAD, AND ANTI-TWO BLOCK (A2B) CONDITION. The Hirschmann PAT DS350GW system uses angle sensors to measure boom and jib angle, if applicable. The hoist line force transducer measures the load. And the A2B switch senses an approaching a two block condition. The DS350GW operates on the principle of comparing real to reference data. The real data is supplied to the central unit by sensors and the operator’s input settings, such as: operating code, hoist selection switch, and reeving switch. The reference data (i.e. crane capacity charts, geometry) is supplied by the crane manufacture and stored in memory chips in the central processor unit. The microprocessor evaluates the real data (sensors and operator input) to determine an operating mode. The operating mode determines the reference data required to calculate permitted operating limits. When limits are exceeded, warning signals are generated and viewed at the operator’s console. Note the difference between operator’s code and mode; the code is entered by the operator from Appendix, and the system defines the mode
this item is new and unused with no defect or missing parts, item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item
Model DS350 GW & 31-002-06-0011
Country/Region of Manufacture Ireland
MPN DS350 GW & 31-002-06-0011

Directions

Similar products from Other Wiring Accessories and Switches

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies