DUCT FURNACE HEATER Commercial - Natl Gas - Alum Steel Heat Exchr - 200,000 BTU, US $2,077.00 – Picture 0

DUCT FURNACE HEATER Commercial - Natl Gas - Alum Steel Heat Exchr - 200,000 BTU, US $2,077.00 – Picture 1

DUCT FURNACE HEATER Commercial - Natl Gas - Alum Steel Heat Exchr - 200,000 BTU, US $2,077.00 – Picture 2

DUCT FURNACE HEATER Commercial - Natl Gas - Alum Steel Heat Exchr - 200,000 BTU, US $2,077.00 – Picture 3

Duct Furnace Heater Commercial - Natl Gas - Alum Steel Heat Exchr - 200,000 Btu

US $2,077.00

United States
Jan 29th

Open on mobile:
QR code

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) STATES. ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE* ________________________________________________________________________________________________________________ Model: VIRWBB59053 Condition: New Description: Duct Furnace/Heater - Commercial/Industrial Features: 200,000 BTU - Natural Gas Fired - 82% Efficiency Rating - Aluminized Steel Heat Exchanger - Direct Spark Ignition - Inshot Burner Design - Power Vented Exhaust - Rear or Top Flue Discharge - Built-In Low Voltage Thermostat Connection - Low Clearances to Combustibles - Approved for Upstream of a Refrigeration System - ETL Listed, CSA Certified, NFPA Certified, UL Listed, ANSI Compliant - Made in the USA Payment Options: We Accept all Major Credit Cards, Personal & Business Checks, Bank Wire Transfers and Financing through PayPal Bill Me Later Program Shipping: We Ship Worldwide via Air, Ocean and Common Carrier. Contact us for a Freight Quote Toll Free 888-718-0706 ______________________________________________________________________________________________________ SEE OUR FULL LINE OF NATURAL GAS HEATERS BY FOLLOWING THIS LINK: OUR NATURAL GAS HEATER LINE This series of commercial duct furnace/heaters is available in 75,000 BTU to 400,000 BTU configurations. Available in both Natural Gas and LP Propane configurations Each model available with 409 Stainless Steel or Aluminized Steel Heat Exchangers Questions? Give our Customer Service Department a Call Toll Free at 888-718-0706 Description & Specifications: Commercial/Industrial Natural Gas Fired Duct Furnace/Heater - 200,000 BTU - Aluminized Steel Tubular Heat Exchanger Our USA made duct furnace/heaters are 82% efficient which provides substantial energy savings Recommedend most commercial and industrial applications including manufacturing and assembly plants, car washes, office buildings, warehouses, garages and similar applications This series of non-separated heaters draw makeup air from within the building or room in which it is mounted 82% efficiency rating is established with the use of tubular heat exchangers and inshot burners Direct spark system provides reliable ignition Incorportated low voltage thermostat connection on rear of unit (see photo in this listing). Theremostat not included. See Optional Items below Features rear or top flue dischange for versatility Side access door provides easy access to burner and controls Approved for upstream of refrigeration systems Maintains uniform wall-to-wall temperatures with consistent air circulation Harmful combustion fumes are vented outdoors Baked on commercial grade powder coat finish on cabinet Single stage, direct spark ignition. 100% shut-off with continuous retry. Utilizes a single-stage combination gas control with ignition control Available with Stainless Steel and Aluminized Steel heat exchangers. For moisture rich environments, you should choose a model with a Stainless Steel Heat Exchanger. Examples of a moisture rich environment would be a carwash or in an existing HVAC system that has air conditioning built into the system - air conditioners cause condensation that will accumulate on the heat exchanger. Stainless steel heat exchangers resist corrosion in moisture rich environments. For all non-moisture rich environments, units with aluminized steel heat exchangers are sufficient If your mounting application is over 2,000 Ft above sea level, please let us know before you order and we'll include a high altitude kit at no extra cost (for more information, please contact us Toll Free at 888-718-0706) Heater Type: Duct Furnace/Heater - Commercial/Industrial Fuel Requirement: Natural Gas (NG) BTU Rating - Input: 200,000 BTU Rating - Output: 164,000 Power Requirement: 115V Amp Draw: 4.7 Amp Hertz: 60 Phase: 1 Ignition: Direct spark Air Volume on High Setting (CFM): 7,750 Air Volume on Low Setting (CFM): 2,050 Number of Burners: 8 Gas Inlet Pressure - Maximum Water Column: 14" Gas Inlet Pressure - Mimimum Water Column: 12" Safety Controls: 100% gas shut off safety control Combustion Type: Non-Separated Venting System: Power Vented Heat Exchanger Construction: Aluminized Steel Clearance to Combustibles - Side Access Door: 31" Clearance to Combustibles - Side: 6" Clearance to Combustibles - Top: 6" Clearance to Combustibles - Bottom: 6" Clearance to Combustibles - Flue: 2" Combustion Air Inlet: 4" Exhaust Flue: 4" Duct Flue: 4" Gas Connection Size: 1/2" Mounting: Horizontal Construction: Steel Efficiency Rating: 82% This heater can be suspension mounted with four 3/8"-16 threaded rods (hardware not included for suspension mounting) Certifications & Approvals: CSA Design Certified - UL Listed - NFPA 54/ANSI Z223.1 Compliant. California Prop 65 Compliant Optional Item: Model VIRWBB59602 - Thermostat - Dial Type - 24V - Please inquire: Toll Free 888-718-0706 Optional Item: Model VIRWBB59606 - Wall Suspension Mounting Bracket Kit - Kit provides a wall-mounted structure from which this heater can be securely suspended - Please inquire: Toll Free 888-718-0706 Optional Item: Model VIRWBB59600 - Shelf Mounting Bracket Kit for Existing Shelves - Kit provides a secure manner in which to mount this heater to an existing shelf - Please inquire: Toll Free 888-718-0706 Optional Item: Model VIRWBB59602 - Wall Shelf Mounting Bracket Kit - This kit should be used if an existing shelf is not present - Includes all required hardware and brackets - Please inquire: Toll Free 888-718-0706 Optional Item: Model VIRWBB59604 - Venting Kit, Concentric - Kit allows the flue and combustion air vent to be consolidated into a single concentric vent box, minimizing the number of wall/roof penetrations. Kit includes one concentric vent box top and side assembly, one concentric vent box bottom assembly, 14 self-driving screws, one 4" vent terminal with baffle plate, one 6" combustion air terminal - Please inquire: Toll Free 888-718-0706 Optional Item: Model VIRWBB59596 - Vent Cap - 4" - This cap vents the combustion air terminal - Please inquire: Toll Free 888-718-0706 Overall Dimensions: 25.5" W x 43" D x 35.25" H Please allow 2 weeks for delivery - this heater is built to order Ship Weight: 250 Lbs 10 Year Warranty - Heat Exchanger (Includes Parts & Labor) 2 Year Warranty - Remainder of Unit (Includes Parts & Labor) Made in the U.S.A. *WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) STATES. ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE* Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Streamline Industrial
Country of Manufacture	United States
Model	VIRWBB59053
Commercial / Industrial Duct Heater	200,000 BTU - 82% Efficient
MPN	VIRWBB59053