Dust Separator Cyclone Dust Collector Kit For Use With Barrels Trash Cans 4 Inch

US $27.99

World Wide, United States
Jul 4th

Open on mobile:
QR code

4 inch Dust Separator Cyclone Dust Collector Kit for Use with Barrels Trash Cans Buckets or Custom Built Containers Product Description 4 inch Dust Separator Cyclone Dust Collector Kit For Use with Barrels Trash Cans Buckets or Custom Built Containers. Some workshops need large dust collection systems with large container to trap the large debris that flows through the dust collection lines. What about the rest of us with our home workshops with smaller dust collection systems? The 4 inch Dust Separator Cyclone Dust Collector Kit steps in quite nicely to fill this void and more. The best part is that not only does it work, you won't break the bank either! Heavier Debris Falls while the Lighter Dust Stays on Top The basic idea behind cyclonic dust separators is to have the natural force of gravity pull the heavier wood debris down to the bottom of the barrel while the lighter dust particle stay up top and flow into your dust collector. Once setup, the 4 inch Dust Separator Cyclone Dust Collector Kit will do this just like any other premium cyclone system only at a fraction of the cost. Protect Your Investment Dust collection has become one of the most important aspects of woodworking safety. With this, comes a bit of a cost to make sure that we are keep dust particles at bay when we are working with wood. When we use our dust collectors with machines like, jointers, planers and even routers those tools tend to produce large chips or shavings that can be very harmful to your dust collectors impeller. The impeller is essentially what draws the dust and debris into the collection unit and into the bag. If large, heavy chips and debris continually hit the impeller, it will eventually wear down and will have to be replaced. To prevent this and to dramatically increase the lifespan of your dust collector impeller, we strongly recommend using our 4 inch Dust Separator Cyclone Dust Collector Kit. Find the Right Container For What You Typically the container size you would use is dictated by the amount of chips you normally produce when using your jointer, router table or planer machines with your dust collector. Most any container will work as long as it has a lid that is firmly secured. We recommend using rigid type containers like the ones shown here. These containers also include lids that are secured on by a clamping system which is also recommended for optimum results. Lids and containers are NOT included. Set Up and Installation Considering that to install the 4 inch Dust Separator Cyclone Dust Collector Kit on to a container lid means that we will have to physically cut holes into the lid, the installation may take more than a few minutes. That being said, we have included easy to follow instructions as well as a scale template of the exact hole size to make transferring the pattern to the lid super easy. We have included the following in this 2 each 4 inch top side ports 2 each 4 inch bottom side half length elbows 2 each 4 inch key secure hose clamps 1 each full color instruction 1 each template for hole cut out 1 pack of nuts and bolts mounting hardware There’s no doubt about it, large cyclone dust collector systems are great! Their value to larger and industrial or commercial workshop settings is immeasurable. What about the rest of us with garage size workshops who don’t want the noise, space consumption or simply the large cost of such a system in their home workshop? The 4” Dust Separator Cyclone Kit is the perfect and economical solution for the everyday woodworker with a smaller to midsize workshop. This cyclone kit will help protect your dust collector from unnecessary wear and tear. Once installed on a barrel, box, or any container (barrel or box not included), this dust and debris separator keeps the larger, heavier chips coming from you machinery from getting into your dust collector impeller. This will ad years to the life of your dust collector and help keep your bag emptying chores to a minimum. The working theory behind cyclone separators is that the heavier wood chips fall to the bottom of the container while the lighter dust particles get pulled in the out feed port and into your dust collector or vacuum. This keeps the large debris from slamming into your dust collector’s impeller or filling up your shop vacuums container to quickly. This also helps prevents any unnecessary damage to dust collector impellers. Another advantage to using cyclone style separators is that your bottom bag on dust collector machines or shop vacuum containers won’t fill up nearly as quick than they would without a cyclone style separator. This means you can use the cyclone separator with your planer, jointer or router tables without having to empty the bag or vacuum containers nearly as often. The 4” Separator Cyclone kit comes with 2 ea. 4" Ports (for top side of separator) 2 ea. 4" in feed elbow ports (for bottom side of separator) 1 ea. hardware pack and 2 ea. easy to secure 4" turn key hose clamps. Hose, barrel or container are required for this kit to properly work. Hose, barrel or container are NOT included.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Color	Does not apply
Batteries Required?	No
Manufacturer:	Peachtree Woodworking Supply Inc.
Included Components	Hose Clamps
Model	530
Material	Plastic
Brand	Peachtree Woodworking Supply
Item Weight	1.54 pounds
UPC	744759543318
Batteries Included?	No
ISBN	Does not apply
Special Features	Dust Collection
EAN	0744110880649
Installation Method	Surface-Mounted
MPN	Does not apply
Is Discontinued By Manufacturer	No
Item model number	530
Package Dimensions	9.65 x 6.42 x 5.79 inches
Part Number	530