Dxs31 Supervised Door/window Transmitter Sst00073 Magnetic Contact Linear Iec

US $260

  • Boca Raton, Florida, United States
  • May 27th
  This transmitter can be used in a variety of wireless remote control applications. Triggering the DXS-31 Supervised Universal Door/Window with its built-in magnetic switch, an external switch or an external glass break detector sends a digitally coded wireless signal to a security receiver or security control panel, alerting you of a possible security issue. In a typical installation, the magnet is mounted on a door or window and the transmitter is mounted on the frame. When the magnet moves more than 1/2" away from the transmitter, an alarm signal is sent. When the magnet returns next to the unit, a restore signal is sent. Alarms and restores can also be sent from external contacts wired to the terminal block. Pressing the case sends a test transmission that updates the receiver to the current state of the contacts and lights the test indicator. The transmitter is a battery powered stationary transmitter designed for use with Linear's DXS and DX format receivers. The DXS-31 can send four different codes: alarm, restore, low battery and status. The DX code format features more than one million possible codes. Each transmitter is precoded at the factory to a unique code so no field coding is required. When the transmitter's case is open, the transmit indicator will light each time the unit sends an alarm or restore signal. The indicator is disabled when the case is closed (except for test transmissions). The indicator will flash during operation and test when the batteries are low. The transmitter is powered from two 3-Volt #2032 lithium batteries with an expected battery life of up to 3 years. Every hour, the DXS-31 will send a status transmission to the receiver. The hourly signal updates the receiver to the transmitter's condition. By monitoring status transmissions, the receiver can determine if a transmitter has a low battery or has been removed from the system. A snap-on transmitter mounting plate is provided for easy installation. The magnet is adjustable with four height positions. A 1/4" high magnet spacer is also supplied to snap on to the base of the magnet. Alarm, alarm restore, supervisory and low battery transmissions Includes magnet for internal contact Includes mounting shoe External Contact Terminals DXS format N/O or N/C input loop circuit Powered by 2032 two lithium batteries (included) Optional 2450 lithium batteries can be used for extended life RF frequency: 315 MHz 1.5" W x 3.3" H x 0.88" D NOTE: DXS designates fully supervised models of the DX transmitters and receivers. DXS products send status transmissions once each hour, allowing full supervision of the RF link. DXS format receivers can monitor status signals, DX format receivers cannot. Jumper Pin Mode Selection A three-position terminal block is for connection to normally closed external contacts or a normally open Window Bug type glass break sensor. An internal jumper selects which input to use. Selections are: internal switch only, external switch only, both external and internal switch, and glass break sensor. Another internal jumper selects an instant or delayed transmission code. This jumper doesn't delay the actual transmissions, but changes the code of the signal sent so the receiver can process the signal as coming from an entry/exit delay transmitter. Pins 1, 2: Glass break operation only Pins 2, 3: For external contact and glass break operation Pins 3, 4: For internal reed switch and glass break operation Jumper removed: Internal, external, and glass break operation Models compatible with the DXS-31 DUAL-824: 24-Channel, 8-Loop Supervised Wireless/Hardwire Security Panel DVS-1200: 12-Channel Supervised Wireless Security Console DVS-2400: 24-Channel Supervised Wireless Security Console DXSR-1504: Supervised 4-Channel Receiver DXSR-1508: Supervised 8-Channel Receiver Technical Details Power: Two 3V 2032 lithium batteries (supplied); optional - two 3V 2450 lithium batteries for extended life Battery Life: Three years (typical) with 2032 batteries; five years with 2450 batteries Measured Range: 1,500 feet, open air, with DVS-2400 control panel Code Outputs: Alarm, alarm restore, supervisory and low battery External Input Terminals Terminals 1, 2 accept N/C contact devices Terminals 2, 3 accept N/O glass break sensors Operating Frequency: 315 MHz Operating Temperature: 32° to 120° F (0° to 49° C) Dimensions: 1.5" W x 3.3" H x 0.88" D (38 x 84 x 22 mm) Manufacturer Part No: SST00073

Directions

Similar products from Other Alert Systems & Accessories

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies