Dynapar Max Position 1 Mp100s00

US $210

  • Kiamika, Quebec, Canada
  • Feb 14th
This is a Used Dynapar Max position 1  MP100S00 the one in the picture is the one you will get.. Please Contact me for info thank you... SPECIFICATIONS Display: Red, 0.6" high (15.4 mm) LED; programmable decimal point position Front Panel: Membrane laminate, NEMA-4 rated when mounted with panel gasket, tactile response keys Input Power: Selectable, 100 to 130 VAC or 200 to 260 VAC, 50/60 Hz, 20 VA (12 VDC @ 0.3 A optional). Accessory Power: Output of 12 VDC, 120 mA maximum Memory: Nonvolatile; retains all program and data during absence of power Security: Program lock; user lock Signal Inputs: 2 inputs, contact-closure or 3.5 to 15 VDC square wave Count Capacity: 6 decades with polarity Calibration: 6 decade multiplier. Range 0.00001 to 9.99999 Presets: 4 individual position comparison limits, each with 2 dedicated outputs Control Inputs: Reference Enable; Output Disable; Reset; Reference Input; Contact closure or 12 volt square wave; 25 msec. minimum pulse width (320 µsec minimum for reference input) Outputs: 8 NPN transistors, rated 28 VDC/100 mA sink, maximum Output Logic: Outputs function in pairs, one output detects count value greater than or equal to preset, other detects count value less than preset Serial Interface: RS-422, ASCII, programmable baud rate Operating Temperature: 32° to 122°F (0° to 50°C) Weight: 2.5 lbs. (1.13 kg.)

Directions

Similar products from Digital & Hand Counters

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies