+ Post new Ad
EARTH CHAIN EDMT-1018 4'X 7' X 2.5' VARI. Pole Mag Chuck, US $440 – Picture 0
EARTH CHAIN EDMT-1018 4'X 7' X 2.5' VARI. Pole Mag Chuck, US $440 – Picture 0

Earth Chain Edmt-1018 4'x 7' X 2.5' Vari. Pole Mag Chuck

US $440

  • Duncan, South Carolina, United States
  • Jun 13th
Open on mobile:
QR code
The design of the cast iron base section & the brass welded top plate, as well as the rare earth magnetic system, ensures an extremely long & maintenance-free lifeBenefits Variable Pitch Poles Provide high holding power for thick and thin workpieces. Designed specifically for machining on surface grinding machines. Pole spacing:steel-1/4"; brass-3/16" Holding power:maximum 199 lbs./sq. in. Fine Pitch Poles Designed specifically for the machining of workpieces of less than 3/16" thickness and 1" diameter or 5/8" square. Pole spacing:steel-1/4"; brass-1/16" Holding power:maximum 128 lbs./sq. in. Applications Use for surface grinding or EDM applications. Features Powerful "rare earth" neodymium iron born magnets are 5 times stronger than other magnets. Needs no electricity. Provides a constant source or workholding power. Low profile design for added clearance. Housing and bottom plate are free of magnetism -will not magnetize machine bed or bearings. Waterproof and fully submersible. Brass welded faceplate can be machined if needed, and protects the magnetic system from penetration of coolant. †  Ships direct from factory. Product Specifications Product Specifications Weight 16.00000 Brand LAMINA Model # EDMT-1018 Length 7" Width 4" Height 2.5" Style Rectangular Permanent Magnetic Chuck Dimensions 4" x 7" x 2.5" Holding Power Maximum 199 LBF/sq. in. Pole Spacing Steel-1/4", brass-3/16" Wheel Diameter 4" Country of Origin Import Shipping Restrictions UPS Ship (drop ship item) Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution for Online Merchants

Directions

Similar products from Other Tool Retention Items

HSK63 Shrink Fit holder 1/4" X 4.50" (H63-25SF450-6TBB)

HSK63 Shrink Fit holder 1/4" X 4.50" (H63-25SF450-6TBB)

  • Fairport, New York, United States
  • Jun 13th
CAT50 Shrink Fit holder 5/16" X 3.15" 9 degree w/ports (C50-31SF315-9C-TH8752)

CAT50 Shrink Fit holder 5/16" X 3.15" 9 degree w/ports (C50-31SF315-9C-TH8752)

  • Fairport, New York, United States
  • Jun 13th
BISON Face Plate Chuck Size:6'' Thread Diameter 3/8''-16 8.6 lbs Dia: 4.921''

BISON Face Plate Chuck Size:6'' Thread Diameter 3/8''-16 8.6 lbs Dia: 4.921''

  • Duncan, South Carolina, United States
  • Jun 13th
CAT50 Shrink Fit holder 1/2" X 4.00" (C50-50SF4-THS8158)

CAT50 Shrink Fit holder 1/2" X 4.00" (C50-50SF4-THS8158)

  • Fairport, New York, United States
  • Jun 13th
SANDVIK C4 CAPTO LATHE TOOL C4-TLSR-27050-3 MORE LISTED LOT C14066

SANDVIK C4 CAPTO LATHE TOOL C4-TLSR-27050-3 MORE LISTED LOT C14066

  • Dayton, Ohio, United States
  • Jun 13th
Tweco Heavy Duty Gas Diffusers (pkg of 5) HD5416

Tweco Heavy Duty Gas Diffusers (pkg of 5) HD5416

  • Johnson City, New York, United States
  • Jun 13th
10N24 TIG TORCH WELDING COLLETS 3/32" (PK 5)

10N24 TIG TORCH WELDING COLLETS 3/32" (PK 5)

  • Johnson City, New York, United States
  • Jun 13th
Bernard N-5818C Centerfire Nozzle Assembly NEW

Bernard N-5818C Centerfire Nozzle Assembly NEW

  • Johnson City, New York, United States
  • Jun 13th
Collet Extension S-E16R06-30N-R, ER16, Round Straight Shank, 5/8" Shank Dia.

Collet Extension S-E16R06-30N-R, ER16, Round Straight Shank, 5/8" Shank Dia.

  • Chillicothe, Missouri, United States
  • Jun 13th
MCKN/R 16-4 1X6 TURNING TOOLHOLDER

MCKN/R 16-4 1X6 TURNING TOOLHOLDER

  • Duncan, South Carolina, United States
  • Jun 13th
CAT50 Shrink Fit holder 5/8" X 5.00" 6 DEGREE (C50-62SF500-6)

CAT50 Shrink Fit holder 5/8" X 5.00" 6 DEGREE (C50-62SF500-6)

  • Fairport, New York, United States
  • Jun 13th
CAT50 Shrink Fit holder 5/16" X 6.30" 9 Deg,Bal,w/ports (C50-31SF630-9C-TH8752)

CAT50 Shrink Fit holder 5/16" X 6.30" 9 Deg,Bal,w/ports (C50-31SF630-9C-TH8752)

  • Fairport, New York, United States
  • Jun 13th
CAT50 Shrink Fit holder 1.25" X 9.50" 9 Deg,Bal,AD/B (C50-12SF950-9-THS7935)

CAT50 Shrink Fit holder 1.25" X 9.50" 9 Deg,Bal,AD/B (C50-12SF950-9-THS7935)

  • Fairport, New York, United States
  • Jun 13th
CAT50 Shrink Fit holder 1" X 10" 9 Deg,Bal,AD/B (C50-10SF1000-9)

CAT50 Shrink Fit holder 1" X 10" 9 Deg,Bal,AD/B (C50-10SF1000-9)

  • Fairport, New York, United States
  • Jun 13th
Armstrong vintage forged tool holder No. S-52 gooseneck type

Armstrong vintage forged tool holder No. S-52 gooseneck type

  • Addison, Illinois, United States
  • Jun 13th
KAISER THINBIT 5/8 Right Hand Small Bit Lathe Tool Holder Carbide Inserts Turn

KAISER THINBIT 5/8 Right Hand Small Bit Lathe Tool Holder Carbide Inserts Turn

  • Oxnard, California, United States
  • Jun 13th
Lot Of 3 CRITERION 6030 Groove Tool Square Shank Boring Bar Carbide Tip USA New

Lot Of 3 CRITERION 6030 Groove Tool Square Shank Boring Bar Carbide Tip USA New

  • Oxnard, California, United States
  • Jun 13th
MANCHESTER 218-128 Separator Integral Shank Tooling Blade Lathe Carbide Holder

MANCHESTER 218-128 Separator Integral Shank Tooling Blade Lathe Carbide Holder

  • Oxnard, California, United States
  • Jun 13th
Sandvik Coromant A393.60B-25 01 168 Sandvik Coromant Tapping Chuck. 1" Dia.Shank

Sandvik Coromant A393.60B-25 01 168 Sandvik Coromant Tapping Chuck. 1" Dia.Shank

  • Fremont, California, United States
  • Jun 13th
NEW SANDVIK C4 CAPTO LATHE TOOL C4-DCLNR-27050-12 MORE LISTED LOT C14061

NEW SANDVIK C4 CAPTO LATHE TOOL C4-DCLNR-27050-12 MORE LISTED LOT C14061

  • Dayton, Ohio, United States
  • Jun 13th

People who viewed this item also vieved

9 PCS.CSE-8 REID'S FIXTURES HEAT TREATED STEEL SLOTED HEEL RADIUS STRAP CLAMPS

9 PCS.CSE-8 REID'S FIXTURES HEAT TREATED STEEL SLOTED HEEL RADIUS STRAP CLAMPS

  • Cushing, Oklahoma, United States
  • Jan 30th
Smithy R8 3/8" lathe adapter

Smithy R8 3/8" lathe adapter

  • Paris, Ohio, United States
  • Jan 30th
1 NEW CIRCLE 10 MM SHANK CARBIDE BORING BAR. GCPM-10-254-5L {D367}

1 NEW CIRCLE 10 MM SHANK CARBIDE BORING BAR. GCPM-10-254-5L {D367}

  • Mentor, Ohio, United States
  • Jan 30th
1 NEW KENNAMETAL 5/8" CARBIDE BORING BAR. E10M-STLDR6P. W/ COOL USA MADE {C963}

1 NEW KENNAMETAL 5/8" CARBIDE BORING BAR. E10M-STLDR6P. W/ COOL USA MADE {C963}

  • Mentor, Ohio, United States
  • Jan 30th
B4S4-1250 - BT40 SHELL MILL ARBOR 1.25" - COMMAND - NEW

B4S4-1250 - BT40 SHELL MILL ARBOR 1.25" - COMMAND - NEW

  • Sudbury, Massachusetts, United States
  • Jan 30th
B4E5-1000 - BT40 ENDMILL HOLDER 1" - EXTENDED - COMMAND - NEW

B4E5-1000 - BT40 ENDMILL HOLDER 1" - EXTENDED - COMMAND - NEW

  • Sudbury, Massachusetts, United States
  • Jan 30th
BEARING SHAFTFOR MOUNTING PULLEYS OR GEARS- 5-5/8" LONG-5/16" SHAFT-3/4" BEARING

BEARING SHAFTFOR MOUNTING PULLEYS OR GEARS- 5-5/8" LONG-5/16" SHAFT-3/4" BEARING

  • United States
  • Jan 30th
BEARING SHAFT FOR MOUNTING PULLEYS OR GEARS- 4-3/4" LONG-1/4" SHAFT-3/4" BEARING

BEARING SHAFT FOR MOUNTING PULLEYS OR GEARS- 4-3/4" LONG-1/4" SHAFT-3/4" BEARING

  • United States
  • Jan 30th
KENNAMETAL CAT40 FACE MILL ADAPTER CV40SM125212

KENNAMETAL CAT40 FACE MILL ADAPTER CV40SM125212

  • Wadley, Alabama, United States
  • Jan 30th
MADE IN USA CAT50 1-1/4" DIA END MILL HOLDER GREAT CONDITION CAT 50 LOT C2647

MADE IN USA CAT50 1-1/4" DIA END MILL HOLDER GREAT CONDITION CAT 50 LOT C2647

  • Dayton, Ohio, United States
  • Jan 30th
Jacobs Model 36 heavy duty plain bearing chuck, 3/16" to 3/4" NOS

Jacobs Model 36 heavy duty plain bearing chuck, 3/16" to 3/4" NOS

  • Suffolk, Virginia, United States
  • Jan 30th
NEW HEAVY DUTY Drill Chuck 5/8" MT2 - Morse Taper - Press NEW

NEW HEAVY DUTY Drill Chuck 5/8" MT2 - Morse Taper - Press NEW

  • Seattle, Washington, United States
  • Jan 30th
KENAMETAL LATHE TOOL HOLDER DCLNL-164D

KENAMETAL LATHE TOOL HOLDER DCLNL-164D

  • Wadley, Alabama, United States
  • Jan 30th
10 x SECO inserts XOEX 120402R-M07 F40M NEW!!

10 x SECO inserts XOEX 120402R-M07 F40M NEW!!

  • Mulheim, Germany
  • Jan 30th
LOT 62 NEW AVDEL CHERRY TEXTRON 07150-06115 MANDREL D471534

LOT 62 NEW AVDEL CHERRY TEXTRON 07150-06115 MANDREL D471534

  • Delta, Ohio, United States
  • Jan 30th
Pearl Reamer Extra Fine Stainless Steel Alloy w Wood Handle 5" Long Tool TL117f

Pearl Reamer Extra Fine Stainless Steel Alloy w Wood Handle 5" Long Tool TL117f

  • Edmond, Oklahoma, United States
  • Jan 30th
(5) NMTB50 End Mill Tool Holders, End Mill, Shell, DoAll, CNC

(5) NMTB50 End Mill Tool Holders, End Mill, Shell, DoAll, CNC

  • Hopkins, Minnesota, United States
  • Jan 30th
SPV 5MT Quick Change Adapter With Eminent Holders 4MT, 3MT, Collet Drill Boring

SPV 5MT Quick Change Adapter With Eminent Holders 4MT, 3MT, Collet Drill Boring

  • Hopkins, Minnesota, United States
  • Jan 30th
TSD Universal Kwik-Switch 200 Series Spindle for 2HP Bridgeport

TSD Universal Kwik-Switch 200 Series Spindle for 2HP Bridgeport

  • Fort Worth, Texas, United States
  • Jan 30th
NEW Smith-Renaud CA-0020 Precision Drilling Spindle PN: 14-108-0289-01 w/Collet

NEW Smith-Renaud CA-0020 Precision Drilling Spindle PN: 14-108-0289-01 w/Collet

  • Phoenix, Arizona, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies