+ Post new Ad
ECONOMY SINE PLATE WITH MAGNETIC CHUCK JC-SP66M BY JEAN CHERNG, US $1,040.00 – Picture 0
ECONOMY SINE PLATE WITH MAGNETIC CHUCK JC-SP66M BY JEAN CHERNG, US $1,040.00 – Picture 0

Economy Sine Plate With Magnetic Chuck Jc-sp66m By Jean Cherng

US $1,040.00

  • Lansing, Illinois, United States
  • Jan 30th
Open on mobile:
QR code
Permanent magnetic chuck.  Removable handle for positive on and off control.  Side rails end rails all included. All have  200 minute angle steps with 0.005mm (0.0002"in ) tolerance in squareness, parallelism and roll center distances

Directions

Similar products from Fittings & Plates

SUBURBAN TOOL Model SV-337 VISE 7 1/2" Long x 4 1/8" Overall x High 3" Wide

SUBURBAN TOOL Model SV-337 VISE 7 1/2" Long x 4 1/8" Overall x High 3" Wide

  • Etna Green, Indiana, United States
  • Jan 30th
1/8" x 1/2 - 1 5/8 Super Prec. Parallel Set,USA - 10 Pair

1/8" x 1/2 - 1 5/8 Super Prec. Parallel Set,USA - 10 Pair

  • Walkerton, Indiana, United States
  • Jan 30th
YUASA 550-103 TAILSTOCK FOR 5C FIXTURE MACHINIST TOOLING

YUASA 550-103 TAILSTOCK FOR 5C FIXTURE MACHINIST TOOLING

  • Waterford, Michigan, United States
  • Jan 30th
Northwestern 33119 3/4-10 x 1-3/4" Heavy Spring Plunger Steel Nose USA

Northwestern 33119 3/4-10 x 1-3/4" Heavy Spring Plunger Steel Nose USA

  • Crystal Lake, Illinois, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Nice Ground Step Angle Block Fixture for Set Up

MACHINIST TOOLS LATHE MILL Nice Ground Step Angle Block Fixture for Set Up

  • Troy, Ohio, United States
  • Jan 30th
Aluminum Angle 1 x 1 x 48 in, 1/4 in thick, 6061, Structural, NEW!

Aluminum Angle 1 x 1 x 48 in, 1/4 in thick, 6061, Structural, NEW!

  • Old Fort, North Carolina, United States
  • Jan 30th
CLEAN! 3" X 12" PRECISION SINE PLATE

CLEAN! 3" X 12" PRECISION SINE PLATE

  • Chino, California, United States
  • Jan 30th
15" SLOTTED MOUNTING FACE PLATE FOR LATHE W/ L0 MOUNT

15" SLOTTED MOUNTING FACE PLATE FOR LATHE W/ L0 MOUNT

  • Chino, California, United States
  • Jan 30th
Right Angle Plate CHALLENGE 6 X 6 X 6 RIGHT ANGLE PLATE L101

Right Angle Plate CHALLENGE 6 X 6 X 6 RIGHT ANGLE PLATE L101

  • Denver, Colorado, United States
  • Jan 30th
DAVENPORT P/N # 13-17 [ NEW ] 5-PCS

DAVENPORT P/N # 13-17 [ NEW ] 5-PCS

  • Churchville, New York, United States
  • Jan 30th
HORZ/VERT 5C COLLET FIXTURE

HORZ/VERT 5C COLLET FIXTURE

  • Wadley, Alabama, United States
  • Jan 30th
LATHE CHUCK BACK PLATE 12-1/2" DIAMETER D1-8 MOUNT

LATHE CHUCK BACK PLATE 12-1/2" DIAMETER D1-8 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
1 PAIR SCHUNK SERRATED CNC BAR PULLER JAWS SP500-2

1 PAIR SCHUNK SERRATED CNC BAR PULLER JAWS SP500-2

  • Wadley, Alabama, United States
  • Jan 30th
1 PAIR SCHUNK SERRATED CNC BAR PULLER JAWS SP400-4

1 PAIR SCHUNK SERRATED CNC BAR PULLER JAWS SP400-4

  • Wadley, Alabama, United States
  • Jan 30th
Alcoa Torrance Davenport Lever Chuck 2219-A Pkg of 4 FREE SHIPPING

Alcoa Torrance Davenport Lever Chuck 2219-A Pkg of 4 FREE SHIPPING

  • Twin Falls, Idaho, United States
  • Jan 30th
LINDQUIST 109-84115 MACHINE CENTERING PLATE COMPONENT REPLACEMENT PART B252349

LINDQUIST 109-84115 MACHINE CENTERING PLATE COMPONENT REPLACEMENT PART B252349

  • Buffalo, New York, United States
  • Jan 30th
LINDQUIST 109-84111 MACHINE CENTERING PLATE COMPONENT REPLACEMENT PART B252475

LINDQUIST 109-84111 MACHINE CENTERING PLATE COMPONENT REPLACEMENT PART B252475

  • Buffalo, New York, United States
  • Jan 30th
LINDQUIST 109-84114 MACHINE CENTERING PLATE COMPONENT REPLACEMENT PART B252483

LINDQUIST 109-84114 MACHINE CENTERING PLATE COMPONENT REPLACEMENT PART B252483

  • Buffalo, New York, United States
  • Jan 30th
ELLIS DIVIDING HEAD WITH INDEX PLATES

ELLIS DIVIDING HEAD WITH INDEX PLATES

  • Beaver Falls, Pennsylvania, United States
  • Jan 30th
TROYKE PRECISION HORIZONTAL-VERTICAL ROTARY TABLE (28712)

TROYKE PRECISION HORIZONTAL-VERTICAL ROTARY TABLE (28712)

  • Cincinnati, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

MACHINIST TOOL LATHE MILL Machinist Schaublin Lathe Center for Tail Stock

MACHINIST TOOL LATHE MILL Machinist Schaublin Lathe Center for Tail Stock

  • Morris Plains, New Jersey, United States
  • Jun 2nd
USED DEAD CENTER STRAIGHT SHANK (.750 POINT) 1.00" Hollowed Out Shank

USED DEAD CENTER STRAIGHT SHANK (.750 POINT) 1.00" Hollowed Out Shank

  • Fairfield, Iowa, United States
  • Jun 2nd
REO TIPO GSH5 LIVE CENTER FOR 5 MORRIS TAPER 1 1/2 INCH DIAMETER TAPER LIVE END

REO TIPO GSH5 LIVE CENTER FOR 5 MORRIS TAPER 1 1/2 INCH DIAMETER TAPER LIVE END

  • Lewiston, Idaho, United States
  • Jun 2nd
49/64" Hardinge 22SC Collet

49/64" Hardinge 22SC Collet

  • Santa Fe, New Mexico, United States
  • Jun 2nd
29/32" Hardinge 22SC Collet

29/32" Hardinge 22SC Collet

  • Santa Fe, New Mexico, United States
  • Jun 2nd
13/32" Hardinge 22SC Collet

13/32" Hardinge 22SC Collet

  • Santa Fe, New Mexico, United States
  • Jun 2nd
6" 4 JAW LATHE CHUCK Cushman 2 1/8" ID 6 TPI

6" 4 JAW LATHE CHUCK Cushman 2 1/8" ID 6 TPI

  • Seekonk, Massachusetts, United States
  • Jun 4th
8 1/4" 3 JAW LATHE CHUCK Wilton 1 3/4" ID 8 TPI

8 1/4" 3 JAW LATHE CHUCK Wilton 1 3/4" ID 8 TPI

  • Seekonk, Massachusetts, United States
  • Jun 4th
9-3/4" 3-JAW LATHE CHUCK PLAIN BACK STK 8150

9-3/4" 3-JAW LATHE CHUCK PLAIN BACK STK 8150

  • Wadley, Alabama, United States
  • Jun 4th
Vintage L.S.Starrett 2 1/4" Toolmakers Parallel Clamp No.161-C

Vintage L.S.Starrett 2 1/4" Toolmakers Parallel Clamp No.161-C

  • Little Falls, New Jersey, United States
  • Jun 4th
Northwestern Tools 20pc. Aluminum Step Blocks #517

Northwestern Tools 20pc. Aluminum Step Blocks #517

  • Roanoke, Virginia, United States
  • Jun 4th
13 pc Lot Mill Milling Hold Down Clamps Edge Clamp & Step Blocks for 5/8" Studs

13 pc Lot Mill Milling Hold Down Clamps Edge Clamp & Step Blocks for 5/8" Studs

  • Lorain, Ohio, United States
  • Jun 4th
Palmgren 2 1/2'' tilting base machinist tool makers vise very nice

Palmgren 2 1/2'' tilting base machinist tool makers vise very nice

  • Valley City, Ohio, United States
  • Jun 5th
JACOB No. 100 4 Inch CROSS SLIDE Machinist VISE Machining DRILL PRESS Holder

JACOB No. 100 4 Inch CROSS SLIDE Machinist VISE Machining DRILL PRESS Holder

  • Hinsdale, New Hampshire, United States
  • Jun 5th
Vintage Wilton Bullet Vise 4" Bench Swivel Base Vise Schiller Pk Ill USA

Vintage Wilton Bullet Vise 4" Bench Swivel Base Vise Schiller Pk Ill USA

  • Denville, New Jersey, United States
  • Jun 5th
Set of 2 Anton Machine Tool Parallel Bars 1-1/2" X 5/8" X 8"

Set of 2 Anton Machine Tool Parallel Bars 1-1/2" X 5/8" X 8"

  • Albuquerque, New Mexico, United States
  • Jun 15th
J&l Magnetic V-block

J&l Magnetic V-block

  • Saint Charles, Missouri, United States
  • Jun 15th
Sherline Model 5000 Headstock With Custom Pneumatic Chuck D2 Steel (TIR .0001")

Sherline Model 5000 Headstock With Custom Pneumatic Chuck D2 Steel (TIR .0001")

  • San Fernando, California, United States
  • Jun 15th
Sandvik Coromant C5-391.14-25 055 Coromant Capto to ER Collet Chuck, 1995.3

Sandvik Coromant C5-391.14-25 055 Coromant Capto to ER Collet Chuck, 1995.3

  • USA, United States
  • Jun 20th
LOT OF 2 UNIVERSAL ENG X2 . DOUBLE TAPER COLLET CHUCK NUT LOC 2572

LOT OF 2 UNIVERSAL ENG X2 . DOUBLE TAPER COLLET CHUCK NUT LOC 2572

  • Sidney, Ohio, United States
  • Jun 20th
UNIVERSAL ENG. ACURA FLEX COLLET CHUCK NUT 9400021 LOC 2571

UNIVERSAL ENG. ACURA FLEX COLLET CHUCK NUT 9400021 LOC 2571

  • Sidney, Ohio, United States
  • Jun 20th
72" Rotary Table

72" Rotary Table

  • Ware, Massachusetts, United States
  • Oct 20th
48" Rotary Table

48" Rotary Table

  • Ware, Massachusetts, United States
  • Oct 20th
5 1/2" - 7" Adjustable Tailstock

5 1/2" - 7" Adjustable Tailstock

  • Glasgow, Kentucky, United States
  • Oct 20th
LOT OF CARBIDE DEBURR END MILL TOOLS ETC

LOT OF CARBIDE DEBURR END MILL TOOLS ETC

  • South El Monte, California, United States
  • Oct 24th
LOT OF MACHINIST TOOLS REAMERS BACK BORE ETC

LOT OF MACHINIST TOOLS REAMERS BACK BORE ETC

  • South El Monte, California, United States
  • Oct 24th
LATHE TOOL POST WITH HOLDERS

LATHE TOOL POST WITH HOLDERS

  • South El Monte, California, United States
  • Oct 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies