Efr Es100 Power Supply With Pfc Function, For F4, Zs1450 Co2 Sealed Laser Tubes

US $217.62

Beijing, China
Aug 11th

Open on mobile:
QR code

Original EFR ES100 Power Supply / Power Source with PFC Function, for EFR F4, ZS1450 CO2 Sealed Laser Tubes, 90V-250V Description: EFR power supplies for CO2 laser tubes adopt zero-current half-bridge soft-switch circuit to ensure the equipment has advantages of high efficiency, rapid response speed and simple port control, and applicable to two signals – high and low level. TTL level is to control the laser on/off, in the meantime, the power supply has an anomalistical protective switch to check whether the outer water and air, etc. Features: 1.Initiative PFC function, AC90-250V wide input voltage range, universal for all countries voltage. 2.Special design for outer shell, more beautiful appearance, better heat dissipation. 3.Improved current control mode, more stable laser, better compatibility, more adaptable for different kinds of laser tubes. 4.Simple power control, user can control laser with high or low level signal. 5.With test button, easy to test laser tube and power supply. 6.Small size outer shell, suitable for installing on the beam of cutting bed. Item CS-PS-ES100 Input Input Voltage AC90-250V AC Frequency 47 - 440Hz Max Input Power 700W Max Input current(when 90V input) 8A Output Max output Voltage 45KV Max Output current 32mA Efficiency 90%(full load) min MTBF(mean time between failure) 10000hours min Response speed 1mS(the time from the signal is given to output current reaches 90% of set current ) Withstand voltage Input-output, input-shell:AC1500V 10mA 60s Working environment Temperature(-10~40) , relative humidity:90% Cooling Force air cooling Network cable Length(M) 1.5M/3M Dimension LxWxH(MM) 278x144x104 Packing size LxWxH(MM) 300x150x140 Weight Net weight(KG) 2.45 Gross weight(KG) 4 Color Silver grey P1 High voltage indicator light P2 FG: ground connection; AC: input P3 Test button P4 terminal definition TH Input signal Laser on/off control, laser on when high level(3V), laser off when low level(0.3V) TL Input signal Laser on/off control, laser off when high level(3V), laser on when low level(0.3V) WP Input signal Laser on/off control, laser off when high level(3V), laser on when low level(0.3V) G Signal ground This terminal must be connected with outer shell and control board of machine properly IN Power signal Laser power control terminal, control with 0-5V analog signal or 5V PWM signal 5V Output 5V output, max output current is 20mA Advantages: Application: Es-100 Laser Power Supply is used for 60W,80W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber,ect. Package:

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	for F4, ZS1450 CO2 Sealed Laser Tubes
Type	EFR ES100 Power Supply with PFC Function
Input Voltage	AC90-250V
MPN	0160002143800
UPC	6927053036906
Brand	QOMOLANGMA