Elevated Aluminum Work Platform - Military Surplus - Sky-hi Scaffolding

US $650.00

  • Washington, Indiana, United States
  • Jan 30th
Up for sale is a little used elevated aluminum scaffold or work platform.  This is a government surplus item that we purchased recently.  We have not attempted to build it and we believe, but can not guarantee, that all the pieces are present.  We have a contents sheet and we believe that the major pieces are all present.  This unit comes in a wood framed, plywood sided shipping container that is eight feet x 42 inches or so.  It was bolted closed when we took possession of it and we could tell it had not been disturbed since being closed up.   All of the tubing is 2".  Every piece is aluminum except the braces which are galvanized steel and free of rust, all 20 clamps (non-rusting alloy) and both types of jacks.  Every 2" round piece and every piece of deck is aluminum and not thin aluminum either.  From the paperwork we can tell this was built for Boeing Aircraft originally.  A couple of the deck pieces have Boeing inventory badges on them.   Here is basically what the set consists of: 7 pieces of heavy decking with diamond plated surface laid on a well built, heavy frame.  Some have hooked ends and some do not.  Five of these are rectangular and two are not. 8 pieces of 2" tubing welded into rectangles that are all roughly 48" tall of various widths that have ladder rungs incorporated into them.  There are four types, two identical for each type. 8 pieces of 2" tubing all straight.  Four different lengths, two identical of each type. 8 pieces of 2" tubing roughly 40" long that have two 3/8" threaded studs protruding from them about half way up with a stud also protruding from the end of the tube.  Each of these eight pieces is identical. 4 pieces of 2" tubing that are welded into outriggers. 16 right angle scaffold clamps 4 universal/swivel scaffold clamps 8 screw jacks 3 scissors jacks with operating handles 4 ultra high quality scaffolding casters with ball bearings, cast iron wheels, hard nylon tires, locking direct wheel contact brakes and grease fittings.  Each is size 8" x 2".  These are the highest quality scaffolding casters that I have ever seen. 1 bag with four scaffolding pins. All of the pieces are in like new condition.  There are some light marks on the poles where the clamps have been.  None of the pieces are bent, cracked, warped or damaged in any way.  We do not have assembly instructions but I would imagine that someone with experience in scaffolding could put it together.  Again, we do not guarantee that this is a complete set or that it will make anything at all. This item is located in southwestern Indiana, about 45 minutes north of Evansville.  The new I-69 goes through this town and the loading spot is roughly 7 miles off of I-69.  We have access to a fork lift to place on a trailer or inside a van.  We have not weighed the box or the contents but I would guesstimate around 600 - 700 pounds total.  Presently, the box is sitting on blocks.  We lifted it off the trailer with a chain fall. We will do whatever is necessary for a quick pick-up of this set or work with a freight company to keep your costs to a minimum.  All bids are much appreciated and thanks to all for looking.  Please see our other things for sale. CLICK ON PHOTO FOR SUPER SIZED VIEW

Directions

Similar products from Stepladder, Scaffolding & Platforms

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies