Elimia Air Compressor & Pump Motor Starter 230V 37-50 Amp 15 20 25 30 HP NEMA 12, US $207.00 – Picture 0

Elimia Air Compressor & Pump Motor Starter 230V 37-50 Amp 15 20 25 30 HP NEMA 12, US $207.00 – Picture 1

Elimia Air Compressor & Pump Motor Starter 230V 37-50 Amp 15 20 25 30 HP NEMA 12, US $207.00 – Picture 2

Elimia Air Compressor & Pump Motor Starter 230v 37-50 Amp 15 20 25 30 Hp Nema 12

US $207.00

Attalla, Alabama, United States
Jan 29th

Open on mobile:
QR code

Please call us if you have any questions. We want you to get the right equipment - 1-855-4Elimia. This is for a new magnetic motor starter designed to run air compressors or pumps or any machine that automatically runs based on it's settings. Pre-wired for easy installation. This starter includes an On/Off selector switch and LED indicator light. Two wires are stubbed inside the enclosure that should be wired to your remote switch. Such as, the pressure switch contacts on your air compressor or pump. This will allow your machine to start and stop based on the pressure setting. The indicator light will remain on anytime the rotary switch is turn on - this is to remind you the system is enabled. We added this indicator so customers would not accidentally leave their air compressor cycling all night.... The unit will arrive completely assembled in a real nice Wiegmann NEMA 12/13 steel hinged door enclosure. Our motor starters use UL certified IEC type components. IEC type motor starters are made up of primarily two parts. A contactor and overload device. Both devices have maximum ratings and the overload has maximum and minimum ratings. You should choose a motor starter that fits both criteria. If you need help please email or call, we will be glad to assist. To size your starter properly you must determine the following: -Three phase or Single phase -Supply voltage ie. 120V; 240V; 480V; 600V -Machine single motor HP -Motor FLA (full load Amps) -Application, what type of machine you running We recommend that for certain machines to use a contactor the is oversized. Meaning if you have a 10 HP machine and the contactor is rated for not more than 10 HP, we recommend you go up one contactor size to a 15 HP contactor. This is recommended for hard starting machines and machines that are started and stopped frequently. Such as air compressors, blowers, vacuums etc... Also, you must size the contactor based on your supply voltage. A contactor rated for 15 HP at 240V three phase will be rated for less HP at 480V. Exceeding the contactors rating will dramatically reduce its life. Ratings of contactor used in this starter, do not exceed ratings: 1 phase- 15 HP @ 240 VAC Max FLA 68 Amps 3 phase- 20 HP @ 200 VAC Max FLA 62 Amps 3 phase- 25 HP @ 240 VAC Max FLA 68 Amps 3 phase- 40 HP @ 460 VAC Max FLA 52 Amps 3 phase- 40 HP @ 600 VAC Max FLA 41 Amps Control voltage is 230 VAC and is pre-wired. The control voltage is the voltage used to activate the coil of the contactor. In the simplest install you will want a coil voltage the same as your power supply. But in some cases you might want the control voltage to be different for a host of reasons. All components used in our assemblies are UL Certified. The overload will have an adjustable Amperage range. Your overload choice is based on your machines FLA. If your machine motor has a FLA of 10 Amps at your supply voltage then you should choose the overload where 10 Amp falls within the adjustable range. For a 10 Amp FLA we would recommend overload 9 - 13 Amps. Our overloads can be set for manual or automatic reset operation. The overload control is pre-wired by Elimia in a way that trips the starter. This is done to protect your equipment and is one of the main purposes of a motor starter. Our standard overload is thermal type class 10A. Please see link below for an informational video of features. http://www.chint.net/product/case.php?l=en&tq=0.2.11.1954.1956. Verify your equipment FLA rating to determine overload size needed. If you do not specify overload size when ordering you will receive overload 37-50 Amp. Overloads that are available for assembly in this starter: Please specify overload size when ordering. 23-32 Amp 30-40 Amp 37-50 Amp If you are ordering this motor starter for a single phase application, please let us know. There is a slight wiring change that we do that sets it up for single phase. Components mounted on a easy to remove back plate. This assembly now comes with a premium steel enclosure with hinge door. Enclosure is NEMA 12/13 made in USA by Wiegmann. Provides protection from water/dust/oil. UL listed to 600V. This enclosure does not provide knockouts for wiring. Enclosure size is 10 x 8 x 6 or 10 x 8 x 5 or 10 x 8 x 4. 90 day replacement Elimia warranty. Great price! We have pre-wired DOL motor starters available from 0 HP to 200 HP. Please call 1-855-4Elimia for more info or if we can help sizing a starter. Elimia has assembled and supplied thousands of starters to customers all over the world. In addition to our standard products we design and built custom control panels and packaged drives. Our customers come back again and again for the value products we offer. Please note: We stock an extensive inventory of contactors, overloads, enclosures, switches etc... We do not stock preassembled units due to the massive possible combination of products. All motor starters and assemblies are built to order. Lead time may vary from same day to three days. If you need something expedited please call us and we will let you know if we can accommodate. Also, from time to time we might be out of certain components. If a substitute assembly can be built with acceptable components we will let you know. Otherwise, we might have to cancel your order. Guarantee: Satisfaction Guaranteed! If you are not happy with your purchase within two weeks of arrival you can return it. No restocking fee! Offer excludes shipping and eBay fees. If the item has been installed and it turns out not be what you needed please call us. We will work with each customer and try to reach a resolution. Buyers: Potential buyers registered outside the USA must get approval before bidding UNLESS the listing indicates them as a ship to location. Most small items are now available for Worldwide shipping. There is no charge for on-sight pickup but 5% tax applies. Please note: All items should be professionally inspected and tested prior to installation or use. We are not liable for damages, injuries or death relating to our products. Payments: We accept Paypal and Credit Card payments. Credit card payments are only accepted over the phone. We reserve the right to refuse payment from buyers registered in foreign countries or locations with non corresponding ship to addresses. Additionally, we reserve the right to refuse payment from any buyer which will feel is acting in a possible malicious manner. Feedback: Once you are satisfied with your purchase please leave us feedback. If you have any problem with the transaction or product, please contact us. ACMS 37-50-230-NEMA 12/13

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Elimia
Country of Manufacture	United States
Model	ACMS 37-50-230 NEMA 12 Steel