Elk M1XEP Ethernet IP Interface Module RS-232 Serial Port Interface for Elk M1, US $159.00 – Picture 0

Elk M1XEP Ethernet IP Interface Module RS-232 Serial Port Interface for Elk M1, US $159.00 – Picture 1

Elk M1xep Ethernet Ip Interface Module Rs-232 Serial Port Interface For Elk M1

US $159.00

Ormond Beach, Florida, United States
Jan 30th

Open on mobile:
QR code

You are bidding on a new and factory boxed, Elk M1XEP Ethernet Interface!Fully upgradable over LAN to keep unit to latest specs! The ELK-M1XEP is an Ethernet Appliance with a RS-232 Serial Port Interface. It may be used to connect a control in the M1 Family to an Ethernet network. It features email event notification and FIPS compliant encryption algorithms for security sensitive environments. It is powered by an ELK-P1216 12 Volts DC, 1.5 Amp plug-in power supply/adapter. A software setup utility is built into ElkRP for configuring the connection setup, network password, etc. The M1 Ethernet Interface is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. router, cable modem, etc.). It may optionally be setup with a static IP address. Secure connection with password protection and SSL/TLS encryption • Flash Memory for Firmware Updating • Event notification via E-Mail (SMTP) • Supports automatic Dynamic DNS Updates with providers using the DynDNS protocol. • Supports Network Time Protocol for synchronizing the M1/EZ8’s clock with an Internet time server. • Internet Monitoring and Reporting Capability • Network stack supporting the following protocols: -TCP,UDP,DHCP,SSL/TLS, NTP, SMTP • Federal Information Processing Standards (FIPS) 128 bit encryption • Integrated 802.3 compliant 10/100 Mbit network interface • RS232, DB9M 9-pin serial port connection • Connects to the M1 RS-232 Serial port (Port 0). The baud rate for this port must be set to 115,200 (factory default) • RJ45 8-pin Network Jack • 2.1mm barrel type power connector (center positive) • LED Indicators for Power, Link, and Data Operating Voltage: 12 Volts D.C. from Elk-P1216 Plug-in Power Supply ** • Current Draw: approx. 300 mA • Housing Dimensions: 4.25" x 6.375" x 2.125" • Circuit Board Dimensions: 2.25" x 3.95" • ELK-W040A Serial Ribbon Cable included SAVE BIG!

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Elk
Model	M1XEP
Type	Ethernet interface