+ Post new Ad
End mill router 1-flute one flute HSS E 8mm 2 pcs lot, US $24.90 – Picture 0
End mill router 1-flute one flute HSS E 8mm 2 pcs lot, US $24.90 – Picture 0

End Mill Router 1-flute One Flute Hss E 8mm 2 Pcs Lot

US $24.90

  • Keratsini, Attiki, Greece
  • Mar 6th
Open on mobile:
QR code
 Aluminum end mill router 1-flute one flute HSS E carbide 1/4" 2pcs lot Geometry designed for the machining of Aluminum and its alloys, copper and other non-ferrous materials. Excellent tool life and higher cutting accuracy. Excellent cutting abilities. Large chip Small material removal - perfect for routing, slotting on thin or thicker sheets. High speed machining. Milling aluminum, low silicon aluminum, & copper alloys. The tool is in new condition - never used It comes with no packaging, just in oily paper The tool can be sharpened and reused many times. 1-flute center cutter 10mm width Arbor diameter: 8mm Material: HSS / E Do not hesitate to contact if you need more than one or further information on item. Returns accepted Powered by eBay Turbo Lister
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Quantity 2
Unit piece

Directions

Similar products from End Mills Router & Drill Bits

9 YG YG1 carbide ball nose Extended length end mills 1/8 3/16 1/4 5/16 EX Long

9 YG YG1 carbide ball nose Extended length end mills 1/8 3/16 1/4 5/16 EX Long

  • Trempealeau, Wisconsin, United States
  • Mar 6th
Bassett brand 1/2 4FL ball nose carbide end mill with .375 shank 52345 MSE

Bassett brand 1/2 4FL ball nose carbide end mill with .375 shank 52345 MSE

  • Trempealeau, Wisconsin, United States
  • Mar 6th
Garr 1/2 4FL solid carbide end mill 230M 11310 lot of 6 new

Garr 1/2 4FL solid carbide end mill 230M 11310 lot of 6 new

  • Trempealeau, Wisconsin, United States
  • Mar 6th
LOT of (8) END MILLS, BALL END, 5/16" to 2" Diameters

LOT of (8) END MILLS, BALL END, 5/16" to 2" Diameters

  • Bremen, Indiana, United States
  • Mar 6th
Kennametal SLEC188S2 KC610M carbide 2FL 3/16 end mill lot of 8 new

Kennametal SLEC188S2 KC610M carbide 2FL 3/16 end mill lot of 8 new

  • Trempealeau, Wisconsin, United States
  • Mar 6th
YG YG1 4 fl Ex long carbide end mills 1/8x1/8 lot of 8 CNC mill

YG YG1 4 fl Ex long carbide end mills 1/8x1/8 lot of 8 CNC mill

  • Trempealeau, Wisconsin, United States
  • Mar 6th
Micro 100 Super Carbide BMS 022-2 END MILL Ball Nose NEW

Micro 100 Super Carbide BMS 022-2 END MILL Ball Nose NEW

  • Cerritos, California, United States
  • Mar 6th
Micro 100 Super Carbide BMS 026-2 END MILL Ball Nose NEW

Micro 100 Super Carbide BMS 026-2 END MILL Ball Nose NEW

  • Cerritos, California, United States
  • Mar 6th
7/8 High Speed end mill "new"

7/8 High Speed end mill "new"

  • Ontario, California, United States
  • Mar 6th
DYNA 2400 cnc machine

DYNA 2400 cnc machine

  • Alvin, Texas, United States
  • Mar 6th
End mill 2 pcs two flute carbide TCT 8 mm flat and ball end set 55deg HRC 55

End mill 2 pcs two flute carbide TCT 8 mm flat and ball end set 55deg HRC 55

  • Keratsini, Attiki, Greece
  • Mar 6th
morse taper #1 8mm 2 flute end mill HSS

morse taper #1 8mm 2 flute end mill HSS

  • Keratsini, Attiki, Greece
  • Mar 6th
End mill 6mm diamond abrasive ceramics glass cutter tool 9mm arbor 2pcs lot

End mill 6mm diamond abrasive ceramics glass cutter tool 9mm arbor 2pcs lot

  • Keratsini, Attiki, Greece
  • Mar 6th
woodruff seating cutter key keyseat 40mm diameter 20mm shaft 8mm width HSS mill

woodruff seating cutter key keyseat 40mm diameter 20mm shaft 8mm width HSS mill

  • Keratsini, Attiki, Greece
  • Mar 6th
1 piece Carbide PCB Engraving Bits CNC Router tool 15° 0.1mm Dia 33mm length

1 piece Carbide PCB Engraving Bits CNC Router tool 15° 0.1mm Dia 33mm length

  • Shanghai Door to Door Service, China
  • Mar 6th
1 piece Corn cob PCB end mill engraving cnc router tool bits 1/8 1.6mm

1 piece Corn cob PCB end mill engraving cnc router tool bits 1/8 1.6mm

  • Shanghai Door to Door Service, China
  • Mar 6th
1 piece Corn cob PCB end mill engraving cnc router tool bits 1/8 2.0mm

1 piece Corn cob PCB end mill engraving cnc router tool bits 1/8 2.0mm

  • Shanghai Door to Door Service, China
  • Mar 6th
TIALN 6mm SOLID CARBIDE End Mill Coating HRC 55 Cutting, Tungsten Carbide

TIALN 6mm SOLID CARBIDE End Mill Coating HRC 55 Cutting, Tungsten Carbide

  • Shanghai Door to Door Service, China
  • Mar 6th
2MM (R1) X 50MM 2-FLUTE HRC55 CENTER CUTTING AlTiN/TiAIN CARBIDE BALL ENDMILL 5x

2MM (R1) X 50MM 2-FLUTE HRC55 CENTER CUTTING AlTiN/TiAIN CARBIDE BALL ENDMILL 5x

  • --, Hong Kong
  • Mar 6th
3/8 4 Flute Centercutting Ball Nose Carbide End Mill TiCN Coated NEW AccuPro 1pc

3/8 4 Flute Centercutting Ball Nose Carbide End Mill TiCN Coated NEW AccuPro 1pc

  • Hastings, Michigan, United States
  • Mar 5th

People who viewed this item also vieved

Federal 1.00" Broach

Federal 1.00" Broach

  • Endicott, New York, United States
  • Jan 30th
Federal 5mm Broach

Federal 5mm Broach

  • Endicott, New York, United States
  • Jan 30th
¤¤PARTING GROOVING¤¤ISCAR 50pcs.of ISCAR DGN 2202C IC354 inserts+original packs

¤¤PARTING GROOVING¤¤ISCAR 50pcs.of ISCAR DGN 2202C IC354 inserts+original packs

  • BG, Serbia
  • Jan 30th
PH HORN CARBIDE INSERTS (QTY1) RU108.0.015.31 TN35

PH HORN CARBIDE INSERTS (QTY1) RU108.0.015.31 TN35

  • Grand Rapids, Michigan, United States
  • Jan 30th
Ceratip TNG 433 Ceramic Insert

Ceratip TNG 433 Ceramic Insert

  • Johnson City, New York, United States
  • Jan 30th
Ceratip RNG 43T00625 A66N Ceramic Insert

Ceratip RNG 43T00625 A66N Ceramic Insert

  • Johnson City, New York, United States
  • Jan 30th
12 NEW 1/8" SHANK CARBIDE BURRS. DOUBLE END COMMON SHAPES. LONGS USA MADE F108

12 NEW 1/8" SHANK CARBIDE BURRS. DOUBLE END COMMON SHAPES. LONGS USA MADE F108

  • Mentor, Ohio, United States
  • Jan 30th
12 NEW 1/8" SHANK CARBIDE BURRS. GREAT VARIETY OF SHAPES. LONGS. USA MADE {F81}

12 NEW 1/8" SHANK CARBIDE BURRS. GREAT VARIETY OF SHAPES. LONGS. USA MADE {F81}

  • Mentor, Ohio, United States
  • Jan 30th
Threading Die Wrench for 4" OD x 1" thick Dies

Threading Die Wrench for 4" OD x 1" thick Dies

  • Coventry, Rhode Island, United States
  • Jan 30th
" GID" Threading Die 5/16"-24 NF

" GID" Threading Die 5/16"-24 NF

  • Coventry, Rhode Island, United States
  • Jan 30th
3/4" BESLY CHUCKING REAMER

3/4" BESLY CHUCKING REAMER

  • Fort Wayne, Indiana, United States
  • Jan 30th
"Q-Cut" Chucking Reamer 7.9mm ( .3110")--6 flute

"Q-Cut" Chucking Reamer 7.9mm ( .3110")--6 flute

  • Coventry, Rhode Island, United States
  • Jan 30th
Slitting Saw Simonds 6-55/64 x 0.056 x 1-1/4 ID 150 Teeth #8360

Slitting Saw Simonds 6-55/64 x 0.056 x 1-1/4 ID 150 Teeth #8360

  • Resaca, Georgia, United States
  • Jan 30th
PLAIN MILLING CUTTER 4-3/8 OD X 15/32 THICK X 1-1/4 GORHAM HIGH SPEED #8205

PLAIN MILLING CUTTER 4-3/8 OD X 15/32 THICK X 1-1/4 GORHAM HIGH SPEED #8205

  • Resaca, Georgia, United States
  • Jan 30th
KLEIN TOOLS STEP DRILL BIT 4 59004 3/4"-1-3/8" NEW!

KLEIN TOOLS STEP DRILL BIT 4 59004 3/4"-1-3/8" NEW!

  • Lake Zurich, Illinois, United States
  • Jan 30th
Carbide Burr (SC-3L6D) Cylindrical Ball Nose - Double Cut

Carbide Burr (SC-3L6D) Cylindrical Ball Nose - Double Cut

  • Rialto, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies