+ Post new Ad
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 0
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 1
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 2
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 3
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 4
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 5
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 0
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 1
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 2
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 3
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 4
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3, US $120 – Picture 5

End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed Lot Of 3

US $120

  • Philadelphia, Pennsylvania, United States
  • Feb 28th
Open on mobile:
QR code
Mixed Lot of 3 13/16" x 3/4" x 1 1/2" x 3 3 /4" End Mill 2 Flutes ACCULEAD 530182-  1" X 1" X 2" X 4 1/2" x RAD???- End Mill 2 Flutes NIAGARA CUTTER 90326 1 1/4" X 1 1 /4" X 4" X 6 3/8"- UNDER CUT (3.25) End Mill 4 Flutes MELIN TOOLS All in good used condition.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Material HSS
MPN Mixed Lot
End Type Single End
Flutes 2 AND 4 FLUTES
Brand Niagara Cutter
Cutting Diameter 13/16", 1" , 1 1/4"
Model Mixed Lot

Directions

Similar products from End Mills Router & Drill Bits

ASSORTMENT OF 40 NEW AND USED MILL ENDS (NO RESERVE)

ASSORTMENT OF 40 NEW AND USED MILL ENDS (NO RESERVE)

  • Greensboro, North Carolina, United States
  • Feb 28th
2.5MM X 50MM 2-FLUTE HRC55 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 5x

2.5MM X 50MM 2-FLUTE HRC55 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL 5x

  • --, Hong Kong
  • Feb 28th
FULLERTON DURA-CARB 39206 3/16X5/8X2 LIST 3700 SQUARE END **NEW**

FULLERTON DURA-CARB 39206 3/16X5/8X2 LIST 3700 SQUARE END **NEW**

  • Forest Lake, Minnesota, United States
  • Feb 28th
FULLERTON DURA CARB ENDMILL 39208 * 1/4X3/4X2-1/2 **NEW**

FULLERTON DURA CARB ENDMILL 39208 * 1/4X3/4X2-1/2 **NEW**

  • Forest Lake, Minnesota, United States
  • Feb 28th
FULLERTON DURA CARB END MILL 39210TIN * 5/16X13/16X2-1/2 **NEW**

FULLERTON DURA CARB END MILL 39210TIN * 5/16X13/16X2-1/2 **NEW**

  • Forest Lake, Minnesota, United States
  • Feb 28th
CLEVELAND TWIST C41171 #598 3/4X3/4X1-5/8 4 FLT H8 ENDMILL TIALN**NEW**

CLEVELAND TWIST C41171 #598 3/4X3/4X1-5/8 4 FLT H8 ENDMILL TIALN**NEW**

  • Forest Lake, Minnesota, United States
  • Feb 28th
1" X 1" X 2" X 4 1/2" Roughing Fine Pitch End Mill 5 Flutes MHC 7242263

1" X 1" X 2" X 4 1/2" Roughing Fine Pitch End Mill 5 Flutes MHC 7242263

  • Philadelphia, Pennsylvania, United States
  • Feb 28th
GREENE 20mm x 1-1/2" x 6" 3 FLUTE COATED SOLID CARBIDE END MILL

GREENE 20mm x 1-1/2" x 6" 3 FLUTE COATED SOLID CARBIDE END MILL

  • Chino, California, United States
  • Feb 28th
1 1/4" x 1 1/4" x 4" x 6 1/2" Roughing End Mill 6 Flutes ACCULEAD 96277

1 1/4" x 1 1/4" x 4" x 6 1/2" Roughing End Mill 6 Flutes ACCULEAD 96277

  • Philadelphia, Pennsylvania, United States
  • Feb 28th
1" Garr End Mill

1" Garr End Mill

  • Roselle, Illinois, United States
  • Feb 28th
New Niagara HSCO End Mill 1" x 1" x2" x 4-1/2" TiCN Coated 6 Flute

New Niagara HSCO End Mill 1" x 1" x2" x 4-1/2" TiCN Coated 6 Flute

  • Independence, Missouri, United States
  • Feb 28th
2 New Richards Micro Tool 1/32" 2 Fl DE Stub HSS End Mills

2 New Richards Micro Tool 1/32" 2 Fl DE Stub HSS End Mills

  • Independence, Missouri, United States
  • Feb 28th
LOT of (12) LARGE END MILLS, 1" to 2" Diameters, QUINCO, BRUBAKER & OTHERS

LOT of (12) LARGE END MILLS, 1" to 2" Diameters, QUINCO, BRUBAKER & OTHERS

  • Bremen, Indiana, United States
  • Feb 28th
10pc pack, New, 1.15mm (.0453'), 2-Flute, Drill Point, Carbide End Mills, CNC

10pc pack, New, 1.15mm (.0453'), 2-Flute, Drill Point, Carbide End Mills, CNC

  • Berkeley, California, United States
  • Feb 28th
10pc Set, New, 5 Metric sizes, Micro End Mills, Carbide, CNC, Dremel

10pc Set, New, 5 Metric sizes, Micro End Mills, Carbide, CNC, Dremel

  • Berkeley, California, United States
  • Feb 28th
Brubaker 79406 HSS Sngl End 4 Flutes 1/4x3/8x5/8 LOC M7 NCC ACCULead 2.721 Bn 10

Brubaker 79406 HSS Sngl End 4 Flutes 1/4x3/8x5/8 LOC M7 NCC ACCULead 2.721 Bn 10

  • Spokane, Washington, United States
  • Feb 27th
Brubaker 79463 HSS Sngl End 4 Flute 1x3/4x1-7/8 LOC M7 NCC ACCULead 5.441 Bn 10

Brubaker 79463 HSS Sngl End 4 Flute 1x3/4x1-7/8 LOC M7 NCC ACCULead 5.441 Bn 10

  • Spokane, Washington, United States
  • Feb 27th
Brubaker 73704 HSS Dbl End 2 Flutes 1/4x3/8x1/2 LOC M7 Ball, Lead .680 Bin 10

Brubaker 73704 HSS Dbl End 2 Flutes 1/4x3/8x1/2 LOC M7 Ball, Lead .680 Bin 10

  • Spokane, Washington, United States
  • Feb 27th
Brubaker 74007 HSS SnglEnd Mill 2 Flutes 1/4x3/8x1/2 LOC M7 CC, Lead 1.360 Bn 10

Brubaker 74007 HSS SnglEnd Mill 2 Flutes 1/4x3/8x1/2 LOC M7 CC, Lead 1.360 Bn 10

  • Spokane, Washington, United States
  • Feb 27th
Brubaker 74616 HSS Sngl End 2 Flutes 3/8x3/8x1-1/2 LOC M7 CC, Lead 2.040 Bn 10

Brubaker 74616 HSS Sngl End 2 Flutes 3/8x3/8x1-1/2 LOC M7 CC, Lead 2.040 Bn 10

  • Spokane, Washington, United States
  • Feb 27th

People who viewed this item also vieved

Lot of 200+ Pull Splines. Keyways, and Flat Broaches

Lot of 200+ Pull Splines. Keyways, and Flat Broaches

  • Racine, Wisconsin, United States
  • Jan 30th
duMont? 1/2" Keyway Broach

duMont? 1/2" Keyway Broach

  • Garden City, Idaho, United States
  • Jan 30th
Hertel Carbide Insert WOGX05T308S Grade CM4 (10 EACH)

Hertel Carbide Insert WOGX05T308S Grade CM4 (10 EACH)

  • Fontana, California, United States
  • Jan 30th
R390 11 T3 08M-MM 2030 SANDVIK *** 10 INSERTS *** 1 FACTORY PACK

R390 11 T3 08M-MM 2030 SANDVIK *** 10 INSERTS *** 1 FACTORY PACK

  • Minneapolis, Minnesota, United States
  • Jan 30th
PRESTIGE Ceramic Inserts SNGA 433-T2 CC20 Qty 10 [934]

PRESTIGE Ceramic Inserts SNGA 433-T2 CC20 Qty 10 [934]

  • Saint Louis, Missouri, United States
  • Jan 30th
PRESTIGE Ceramic Inserts SNGA 433-T2 CC20 Qty 6 [934]

PRESTIGE Ceramic Inserts SNGA 433-T2 CC20 Qty 6 [934]

  • Saint Louis, Missouri, United States
  • Jan 30th
LOT OF (12) MACHINE / MACHINIST TOOLING MACHINE SHOP TOOLS - USED

LOT OF (12) MACHINE / MACHINIST TOOLING MACHINE SHOP TOOLS - USED

  • Lancaster, Kansas, United States
  • Jan 30th
Piloted Counterbore for #00 Socket Head Cap Screws .050x.089 USA

Piloted Counterbore for #00 Socket Head Cap Screws .050x.089 USA

  • Crystal Lake, Illinois, United States
  • Jan 30th
STRIPPIT Nisshinbo AMADA 3.5" DIE WILSON .125 X 3.250 RT +.006/.009/.018/.018 39

STRIPPIT Nisshinbo AMADA 3.5" DIE WILSON .125 X 3.250 RT +.006/.009/.018/.018 39

  • Lake Worth, Florida, United States
  • Jan 30th
STRIPPIT Nisshinbo AMADA 3.5" DIE WILSON 2.024 SQ 13

STRIPPIT Nisshinbo AMADA 3.5" DIE WILSON 2.024 SQ 13

  • Lake Worth, Florida, United States
  • Jan 30th
CLEVELAND H.S. Peerless Reamer straight shank 1-5/8" List NO. 504

CLEVELAND H.S. Peerless Reamer straight shank 1-5/8" List NO. 504

  • Burlington, Iowa, United States
  • Jan 30th
Cleveland H.S. Peerless Reamer, Straight Shank, Expansion Chucking 7/8" #504

Cleveland H.S. Peerless Reamer, Straight Shank, Expansion Chucking 7/8" #504

  • Burlington, Iowa, United States
  • Jan 30th
SLITTING SAW BLADE PLAIN TOOTH 240 TEETH 6.71 OD X 0.033W X 1 ID #8411

SLITTING SAW BLADE PLAIN TOOTH 240 TEETH 6.71 OD X 0.033W X 1 ID #8411

  • Resaca, Georgia, United States
  • Jan 30th
PLAIN STRAIGHT MILLING CUTTER 2-1/2"OD X 3/16"W X 1"ID X 1/4"KS #8583

PLAIN STRAIGHT MILLING CUTTER 2-1/2"OD X 3/16"W X 1"ID X 1/4"KS #8583

  • Resaca, Georgia, United States
  • Jan 30th
Machine Shop Find Some Type Of Bits Lot Of Ten

Machine Shop Find Some Type Of Bits Lot Of Ten

  • Port Deposit, Maryland, United States
  • Jan 30th
NEW LATROBE STEEL DYNACUT HSS TOOL BIT SHANK 3/4" x 3/4" (19mm x 19mm) QuikShip

NEW LATROBE STEEL DYNACUT HSS TOOL BIT SHANK 3/4" x 3/4" (19mm x 19mm) QuikShip

  • Kent, Washington, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies