+ Post new Ad
Engine Lathe Face Plate D1-8 Spindle 15” Diameter x 5.25” Bore, US $1700 – Picture 0
Engine Lathe Face Plate D1-8 Spindle 15” Diameter x 5.25” Bore, US $1700 – Picture 0

Engine Lathe Face Plate D1-8 Spindle 15” Diameter X 5.25” Bore

US $1700

  • San Bernardino, California, United States
  • Jun 12th
Open on mobile:
QR code
Nice!! Engine Lathe Face Plate D1-8 Spindle 15” Diameter x 5.25” Bore Check my other listings for more quality tools and machinery. I combine shipping whenever possible. Questions :Use "Ask Seller a Question" Link PAYMENT INSTRUCTIONS: All payments must be received within 2 business days. If there has been no contact/payment from the buyer within 3 days, NPB will be filed and the item will be re-listed. Sales Tax will be added to invoice to California residents. CUSTOMER SERVICE: We do our best to present accurate information about every item we sell. If you have any questions, use the "Ask Seller a Question" Link before placing your bid. RETURNS: We offer a 30 day return policy for this item from the time of delivery. After 30 days no refunds and returns will be accepted. Buyers will pay for return shipping to our location. BID w/ CONFIDENCE & GOOD LUCK!

Directions

Similar products from Fittings & Plates

OMER. E. ROBBINS. Magna-Sine Plate 4.00" x 4.00" x 3-3/16" Model# B-3

OMER. E. ROBBINS. Magna-Sine Plate 4.00" x 4.00" x 3-3/16" Model# B-3

  • Chalfont, Pennsylvania, United States
  • Jun 12th
HHIP 3402-0301 3-1/2" x 3" x 2-1/2" Slotted Angle Plate, Webbed

HHIP 3402-0301 3-1/2" x 3" x 2-1/2" Slotted Angle Plate, Webbed

  • USA, United States
  • Jun 12th
HHIP 3402-0312 12 x 9 x 8" Slotted Angle Plate, Webbed

HHIP 3402-0312 12 x 9 x 8" Slotted Angle Plate, Webbed

  • USA, United States
  • Jun 12th
Whirli-Gig Sine Plate

Whirli-Gig Sine Plate

  • Cranesville, Pennsylvania, United States
  • Jun 12th
Stepped Angle Plate Hardened 1/4-20 Tapped Holes (24)

Stepped Angle Plate Hardened 1/4-20 Tapped Holes (24)

  • Chalfont, Pennsylvania, United States
  • Jun 12th
Suburban SP-128-S2 Single Angle Precision Sine Plate 12" x 8" x 2-5/8"

Suburban SP-128-S2 Single Angle Precision Sine Plate 12" x 8" x 2-5/8"

  • Venice, Florida, United States
  • Jun 12th
MACHINIST LATHE MILLS Machinist Tool Makers Solid Brass Fixture Block

MACHINIST LATHE MILLS Machinist Tool Makers Solid Brass Fixture Block

  • Morris Plains, New Jersey, United States
  • Jun 12th
96" X 28-1/2" T-SLOTTED BOX TABLE

96" X 28-1/2" T-SLOTTED BOX TABLE

  • Santa Paula, California, United States
  • Jun 12th
Toolmaker's 5 inch Sine Bar

Toolmaker's 5 inch Sine Bar

  • Winston-Salem, North Carolina, United States
  • Jun 12th
Bald Eagle 6 x 6" Compound Sine Plate Fixture Machinist Workholder Tool.

Bald Eagle 6 x 6" Compound Sine Plate Fixture Machinist Workholder Tool.

  • Cornell, Illinois, United States
  • Jun 12th
18" x 17" x 26" Tombstone Fixture Plate For Horiz Machining Center Cast Steel

18" x 17" x 26" Tombstone Fixture Plate For Horiz Machining Center Cast Steel

  • Grand Rapids, Michigan, United States
  • Jun 11th
19" x 18" x 24.5" Tombstone Fixture Plate For Horiz Machining Center Cast Steel

19" x 18" x 24.5" Tombstone Fixture Plate For Horiz Machining Center Cast Steel

  • Grand Rapids, Michigan, United States
  • Jun 11th
TTC Precision Sine Plate CENTER DISTANCE OF ROLLS: 5.000'' within .0002''

TTC Precision Sine Plate CENTER DISTANCE OF ROLLS: 5.000'' within .0002''

  • Duncan, South Carolina, United States
  • Jun 11th
TTC Magnetic Sine Plate-Model:CENTER DISTANCE OF ROLLS:5'' within .0002''

TTC Magnetic Sine Plate-Model:CENTER DISTANCE OF ROLLS:5'' within .0002''

  • Duncan, South Carolina, United States
  • Jun 11th
TTC Magnetic Sine Plate-Model:CENTER DISTANCE OF ROLLS:3''within .0002''

TTC Magnetic Sine Plate-Model:CENTER DISTANCE OF ROLLS:3''within .0002''

  • Duncan, South Carolina, United States
  • Jun 11th
PHASE II Horizontal/Vertical 5C Collet Indexe

PHASE II Horizontal/Vertical 5C Collet Indexe

  • Duncan, South Carolina, United States
  • Jun 11th
PHASEII Optional Tailstock Interchangeable With Yuasa

PHASEII Optional Tailstock Interchangeable With Yuasa

  • Duncan, South Carolina, United States
  • Jun 11th
TTC CNC H/V Toolholder Fixture - TAPER: CAT 40

TTC CNC H/V Toolholder Fixture - TAPER: CAT 40

  • Duncan, South Carolina, United States
  • Jun 11th
PHASE II 5C Spin Index Fixture

PHASE II 5C Spin Index Fixture

  • Duncan, South Carolina, United States
  • Jun 11th
TTC Precision Ground Angle Plate - MODEL #: CPG-8 DIMENSIONS: 8'' x 8'' x 8''

TTC Precision Ground Angle Plate - MODEL #: CPG-8 DIMENSIONS: 8'' x 8'' x 8''

  • Duncan, South Carolina, United States
  • Jun 11th

People who viewed this item also vieved

PRESTIGE, Quadruple V-Block, 4-Way, 3- 3/4" x 2- 3/4" x 1- 3/8", Pair, /KK4/

PRESTIGE, Quadruple V-Block, 4-Way, 3- 3/4" x 2- 3/4" x 1- 3/8", Pair, /KK4/

  • Saint Louis, Missouri, United States
  • Jan 30th
Vintage Toolmaker Machinist Set-up Block 1 x 2 x 3

Vintage Toolmaker Machinist Set-up Block 1 x 2 x 3

  • Buffalo Grove, Illinois, United States
  • Jan 30th
Starrett 651A1Z Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

Starrett 651A1Z Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

  • Richmond Hill, New York, United States
  • Jan 30th
CLIMAX TRACER POINT LIVE CENTER E4565

CLIMAX TRACER POINT LIVE CENTER E4565

  • Wadley, Alabama, United States
  • Jan 30th
FPG CM4 Live Center MT4

FPG CM4 Live Center MT4

  • Spring Valley, California, United States
  • Jan 30th
3/4" Machinist Lathe Tool:Lathe Dog -Atlas/Craftsman/South Bend

3/4" Machinist Lathe Tool:Lathe Dog -Atlas/Craftsman/South Bend

  • Ossian, Indiana, United States
  • Jan 30th
NEW 8 " 3 JAW LATHE CHUCK 0312

NEW 8 " 3 JAW LATHE CHUCK 0312

  • Montville, Ohio, United States
  • Jan 30th
Gibraltar - Manual Lathe Chucks - Type: Self-Centering Nominal - Size: 10"

Gibraltar - Manual Lathe Chucks - Type: Self-Centering Nominal - Size: 10"

  • Ogden, Utah, United States
  • Jan 30th
8" HOWA / HITACHI SEIKI HA6-8-46 CNC HYDRAULIC POWER LATHE CHUCK A2-6 MOUNT

8" HOWA / HITACHI SEIKI HA6-8-46 CNC HYDRAULIC POWER LATHE CHUCK A2-6 MOUNT

  • Cleveland, Ohio, United States
  • Jan 30th
Bessey Welders Angle Clamp Welder Welding Vise Jaw Corner Bench Tool Jig Joints

Bessey Welders Angle Clamp Welder Welding Vise Jaw Corner Bench Tool Jig Joints

  • Bakersfield, California, United States
  • Jan 30th
63 pc 7/16" Slot 3/8" Stud HOLD DOWN CLAMP CLAMPING SET KIT for BRIDGEPORT MILL

63 pc 7/16" Slot 3/8" Stud HOLD DOWN CLAMP CLAMPING SET KIT for BRIDGEPORT MILL

  • New Haven, Michigan, United States
  • Jan 30th
34 Pc Used Step Block & Fixturing Clamp Set, 7/16"-13 T-Bolt Hold Down Kit

34 Pc Used Step Block & Fixturing Clamp Set, 7/16"-13 T-Bolt Hold Down Kit

  • New Haven, Michigan, United States
  • Jan 30th
NEW 5C Bison Lathe Collet Chuck 5" Plain Back

NEW 5C Bison Lathe Collet Chuck 5" Plain Back

  • Columbus, Ohio, United States
  • Jan 30th
Royal Pullback CNC Lathe 5C Collet Chuck Spindle A2-5 42053 Haas Fadal Samsung

Royal Pullback CNC Lathe 5C Collet Chuck Spindle A2-5 42053 Haas Fadal Samsung

  • Carrollton, Ohio, United States
  • Jan 30th
1/2" STRAIGHT SHANK ER16 COLLET HOLDER W/COLLETS Y158

1/2" STRAIGHT SHANK ER16 COLLET HOLDER W/COLLETS Y158

  • Montville, Ohio, United States
  • Jan 30th
Techniks 19/11-4127 Rigid Tap Collet

Techniks 19/11-4127 Rigid Tap Collet

  • Spencer, Indiana, United States
  • Jan 30th
200DA0343USA 11/32 Diameter DA Style Collet NEW USA 1 pc

200DA0343USA 11/32 Diameter DA Style Collet NEW USA 1 pc

  • Trenton, Michigan, United States
  • Jan 30th
Hardinge 9/32 4NS Collet

Hardinge 9/32 4NS Collet

  • Bowling Green, Kentucky, United States
  • Jan 30th
TE-CO T-Slot Bolt Assortment Set (4) Each: 1-1/2", 2", 2-1/2", 3", 3-1/2" and 4"

TE-CO T-Slot Bolt Assortment Set (4) Each: 1-1/2", 2", 2-1/2", 3", 3-1/2" and 4"

  • Flushing, New York, United States
  • Jan 30th
Atlas # 9-88 MT # 2 Dead Center / OO 201

Atlas # 9-88 MT # 2 Dead Center / OO 201

  • Seffner, Florida, United States
  • Jan 30th
Atlas # 9-101-64A Change Gear -64 Tooth / OO 194

Atlas # 9-101-64A Change Gear -64 Tooth / OO 194

  • Seffner, Florida, United States
  • Jan 30th
HAAS T5C2 Dual Spindle

HAAS T5C2 Dual Spindle

  • Chatsworth, California, United States
  • Jan 30th
Adjustable Tailstock For 4-6 Inch Rotary Tables

Adjustable Tailstock For 4-6 Inch Rotary Tables

  • Chino, California, United States
  • Jan 30th
Heavy Duty Tailstock adjustable for Rotary table Dividing head

Heavy Duty Tailstock adjustable for Rotary table Dividing head

  • Houston, Texas, United States
  • Jan 30th
Tool Maker Set 4

Tool Maker Set 4

  • Brooklyn, New York, United States
  • Jan 30th
DoAll Machinist Vice

DoAll Machinist Vice

  • Wilmington, North Carolina, United States
  • Jan 30th
Pipe Vise, Vintage Littletown Hardware & Foundry Co. #52 Pipe Vise Made in USA

Pipe Vise, Vintage Littletown Hardware & Foundry Co. #52 Pipe Vise Made in USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies