Equipment Manufacturing Corp EMC Wastewater Evaporator Water Eater 85E-SS 5 GPH, US $2,250.00 – Picture 0

Equipment Manufacturing Corp EMC Wastewater Evaporator Water Eater 85E-SS 5 GPH, US $2,250.00 – Picture 1

Equipment Manufacturing Corp EMC Wastewater Evaporator Water Eater 85E-SS 5 GPH, US $2,250.00 – Picture 2

Equipment Manufacturing Corp Emc Wastewater Evaporator Water Eater 85e-ss 5 Gph

US $2,250.00

Zionsville, Pennsylvania, United States
Feb 13th

Open on mobile:
QR code

This used wastewater evaporator is in excellent condition. It is the stainless steel version and is equipped with the optional automatic float fill valve. No pumps are included. It is currently connected for 240 Volts/3 Phase/40 Amps but is field convertible to single phase at 50A. Buyer is responsible for all freight costs, or can arrange pickup for no additional cost. Water Eater® Model 85E Wastewater Evaporator The Water Eater Model 85E is an electrically heated waste water evaporator designed for the small to medium sized generator of wastewater. It comes in two models, the Model 85E Carbon Steel version and the Model 85E-SS 316L Stainless Steel version (tank, floor, lid, covers, and stack are 316L SS). Typical applications include minimizing wastewater from machining operations, parts washing equipment, compressor condensate, mop water, die cast solutions, and many other water based waste streams. Installation is easy consisting of only an electrical hookup and a 6" diameter vent stack. The unit can be filled three different ways: (1) Using the supplied 2" coupling on the top of the unit; (2) Remove the lid and manually pour in fluid; or (3) Using the optional 70 GPM self priming fill pump. After an initial heat up time of approximately one hour, the Model 85E will evaporate 5 gallons per hour of water. The Model 85E will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained via a 2" drain opening, vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out. To facilitate cleanout, the interior tank of the 85E water evaporator has no obstructions (such as heating elements or stationary float mechanisms) impeding cleanout. 5 GPH Electric Heat 85 Gallon Capacity Features & Benefits Heavy Duty 12 Gauge Tank, Covers, & Stack (316L Stainless Steel). 3/8” Plate Floor Heat Exchanger (316L Stainless Steel) Automatic Shutoffs (Low Level Control & High Temperature Shutdown) for unattended operation. Simple one button ON/OFF operation. Removable Lid and obstruction free tank floor for fast and easy cleanout. Fully Insulated Tank. Variable Weir skimmer standard on all units. Power exhaust allows venting to outdoors. Quality polyurethane finish. Tank Top at convenient 30” height to facilitate cleanout. Easily installed requiring only a vent stack and electrical hookup. Industry Standardized Components.Most parts are available from major industrial supply houses. You are not held hostage by high mark up on “captive” parts only available by the original equipment manufacturer. Optional 70 GPM Self Priming Feed Pump Optional Auto Fill System One Year Warranty on Parts & Workmanship Specifications: Evaporation Rate 5 Gallons / Hour Tank Capacity 85 Gallons (322 Liters) Tank Construction 12 Gauge Tank w/ 1" Insulation; 16 Gauge Painted Exterior Tank Floor 3/8" Steel Plate (Carbon or 316L SS) Tank Height 30" Skimmer Adjustable Weir Ball Valve Tank Fill Port 2" NPT Coupling Heating System Electric, Through Floor Heat Exchanger, 11,400 Watts Dimensions (Floor Space) 41"L x 23"W x 46" H 41"L x 33"W x 46" H (with Pump or AFS) Utility Requirements 240 Volts/3 Phase/40 Amps (Field Convertible to 240V/1/50A); Optional 480Volts/3 Phase/ 20 Amps Drain Flat, Obstruction Free Floor; 2" Stepdown Drain with Plug Vent Stack 6" Diameter Shipping Weight 450 Lbs. Warranty One Year Parts & Workmanship Labor & Corrosion excluded

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	EMC
Model	85E-SS