+ Post new Ad
Erickson "Tenthset" No 50 Boring Head, US $510 – Picture 0
Erickson "Tenthset" No 50 Boring Head, US $510 – Picture 1
Erickson "Tenthset" No 50 Boring Head, US $510 – Picture 2
Erickson "Tenthset" No 50 Boring Head, US $510 – Picture 0
Erickson "Tenthset" No 50 Boring Head, US $510 – Picture 1
Erickson "Tenthset" No 50 Boring Head, US $510 – Picture 2

Erickson "tenthset" No 50 Boring Head

US $510

  • West Newton, Massachusetts, United States
  • Jan 30th
Open on mobile:
QR code
Small Erickson "Tenthset" boring head for use with 1/2" boring bars. The vernier on the side allows for precise adjustment to .0001 resolution. Adjusts smoothly, has an internal 5/8"-18 thread for spindle adaptor attachment; currently has a 5/8 bolt turned down to a little below 1/2" (.475). Another one could be substituted.

Directions

Similar products from Drilling Heads & Tool Holders

3" Ingersoll V Max Face Mill

3" Ingersoll V Max Face Mill

  • Elk River, Minnesota, United States
  • Jan 30th
Lot of 7 KENNAMETAL Shortened BORING BARS with inserts

Lot of 7 KENNAMETAL Shortened BORING BARS with inserts

  • Bennett, Colorado, United States
  • Jan 30th
WAUKESHA PINZBOHR CAT 50 BORING HEAD-LONG-CAT 350 85 320

WAUKESHA PINZBOHR CAT 50 BORING HEAD-LONG-CAT 350 85 320

  • Howell, Michigan, United States
  • Jan 30th
Kennametal Erikson Dial Set Boring Bar 3-67-093-133

Kennametal Erikson Dial Set Boring Bar 3-67-093-133

  • Millstone Township, New Jersey, United States
  • Jan 30th
Sandvik Capto C6 Three Slide Rough Boring Head NOS

Sandvik Capto C6 Three Slide Rough Boring Head NOS

  • West Chester, Pennsylvania, United States
  • Jan 30th
Komet S10C STUCL 060W Boring Bar

Komet S10C STUCL 060W Boring Bar

  • Millstone Township, New Jersey, United States
  • Jan 30th
Hertel S-Series 8" Boring Bar

Hertel S-Series 8" Boring Bar

  • Davisburg, Michigan, United States
  • Jan 30th
Kaiser 19.371.137 Boring Head

Kaiser 19.371.137 Boring Head

  • Millstone Township, New Jersey, United States
  • Jan 30th
Kaiser 10.326.374 BT50 Holder with 19.371.136 Boring Head

Kaiser 10.326.374 BT50 Holder with 19.371.136 Boring Head

  • Millstone Township, New Jersey, United States
  • Jan 30th
Kaiser 10.326.374 BT50 Holder with 19.371.135 Boring Head

Kaiser 10.326.374 BT50 Holder with 19.371.135 Boring Head

  • Millstone Township, New Jersey, United States
  • Jan 30th
kennametal boring bar with Insret

kennametal boring bar with Insret

  • Davisburg, Michigan, United States
  • Jan 30th
KENNAMETAL BORING BAR B1310 WITH KENDEX 1011A HEAD

KENNAMETAL BORING BAR B1310 WITH KENDEX 1011A HEAD

  • Wadley, Alabama, United States
  • Jan 30th
Sandvik 5/8" x 6.25" Boring Bar RTBAP 10-2

Sandvik 5/8" x 6.25" Boring Bar RTBAP 10-2

  • Johnson City, New York, United States
  • Jan 30th
10 WALTER/VALENITE ESU-16899 INDEXABLE INSERT CARTRIDGE TOOL HOLDERS

10 WALTER/VALENITE ESU-16899 INDEXABLE INSERT CARTRIDGE TOOL HOLDERS

  • Euclid, Ohio, United States
  • Jan 30th
14 WALTER/VALENITE ESU-16900 INDEXABLE INSERT CARTRIDGE TOOL HOLDERS

14 WALTER/VALENITE ESU-16900 INDEXABLE INSERT CARTRIDGE TOOL HOLDERS

  • Euclid, Ohio, United States
  • Jan 30th
carbide tool holder

carbide tool holder

  • Ballwin, Missouri, United States
  • Jan 30th
SANDVIK COROMANT A10R-SCLCR 2-R Internal Boring Bar,A10R-SCLCR 2-R G6882294

SANDVIK COROMANT A10R-SCLCR 2-R Internal Boring Bar,A10R-SCLCR 2-R G6882294

  • Clovis, California, United States
  • Jan 30th
USED DEVLIEG MICROBORE R506 BORING RING AND INSERT CARTRIDGE(4.50"-5.437" RANGE)

USED DEVLIEG MICROBORE R506 BORING RING AND INSERT CARTRIDGE(4.50"-5.437" RANGE)

  • Fairfield, Iowa, United States
  • Jan 30th
NEW SURPLUS DEVLIEG MICROBORE 7A2-12F CARBIDE TIPPED BRAZED CARTRIDGE SIZE#7

NEW SURPLUS DEVLIEG MICROBORE 7A2-12F CARBIDE TIPPED BRAZED CARTRIDGE SIZE#7

  • Fairfield, Iowa, United States
  • Jan 30th
SI-SSKCR-164 STELLRAM BORING BAR 1" SHANK 1.28 MIN BORE

SI-SSKCR-164 STELLRAM BORING BAR 1" SHANK 1.28 MIN BORE

  • Tulsa, Oklahoma, United States
  • Jan 30th

People who viewed this item also vieved

HAAS CT40 1.00" Stub 40 Taper Holder New

HAAS CT40 1.00" Stub 40 Taper Holder New

  • Willoughby, Ohio, United States
  • May 27th
VALENITE CAT 50 1-1/4" END MILL HOLDER 3-7/8" PROJECTION STK 6418

VALENITE CAT 50 1-1/4" END MILL HOLDER 3-7/8" PROJECTION STK 6418

  • Wadley, Alabama, United States
  • May 27th
TUNGALOY JCCWSR1212K2 B85 GROOVER TOOL HOLDER with 6 inserts USED EXCELLENT COND

TUNGALOY JCCWSR1212K2 B85 GROOVER TOOL HOLDER with 6 inserts USED EXCELLENT COND

  • Buffalo, Minnesota, United States
  • May 30th
KENNAMETAL KGCHR-166D Lathe Turning Tool Holder Insert

KENNAMETAL KGCHR-166D Lathe Turning Tool Holder Insert

  • Mentor, Ohio, United States
  • May 30th
.8437 - 27/32 Drill Bit 3 Morse Taper 7" LOC 12-1/4 OAL HSS

.8437 - 27/32 Drill Bit 3 Morse Taper 7" LOC 12-1/4 OAL HSS

  • Milton Freewater, Oregon, United States
  • May 30th
USED VALENITE STRAIGHT SHANK 1 1/4 SHELL MILL ARBOR 1.250 SMA

USED VALENITE STRAIGHT SHANK 1 1/4 SHELL MILL ARBOR 1.250 SMA

  • Fairfield, Iowa, United States
  • May 30th
NEW BROWNING Q1-1 7/16, BUSHING, STEEL SPLIT TAPER, NEW IN FACTORY BOX, NOS

NEW BROWNING Q1-1 7/16, BUSHING, STEEL SPLIT TAPER, NEW IN FACTORY BOX, NOS

  • Rockingham, North Carolina, United States
  • May 31st
NEW BROWNING Q1-1, BUSHING, SPLIT TAPER, NEW IN FACTORY BOX, NEW OLD STOCK

NEW BROWNING Q1-1, BUSHING, SPLIT TAPER, NEW IN FACTORY BOX, NEW OLD STOCK

  • Rockingham, North Carolina, United States
  • May 31st
Lot of Four BT40 Tool Holders (Inv.35573)

Lot of Four BT40 Tool Holders (Inv.35573)

  • Portland, Connecticut, United States
  • Jun 2nd
Lot of Four BT40 Tool Holders Briney, Parlec, Sandvik (Inv.35574)

Lot of Four BT40 Tool Holders Briney, Parlec, Sandvik (Inv.35574)

  • Portland, Connecticut, United States
  • Jun 2nd
Seco Holder

Seco Holder

  • Westfield, Massachusetts, United States
  • Jun 9th
Niagara Cutter 3/8 carbide Altin coated 4 flute roughing endmill .new.1pc.

Niagara Cutter 3/8 carbide Altin coated 4 flute roughing endmill .new.1pc.

  • Du Bois, Pennsylvania, United States
  • Jun 9th
Jacobs #56B Head Stock Chuck TAILSTOCK DRILL LATHE Machinist Tool 21W2

Jacobs #56B Head Stock Chuck TAILSTOCK DRILL LATHE Machinist Tool 21W2

  • Fountain Valley, California, United States
  • Jun 9th
Jacobs taper Shaft jt2

Jacobs taper Shaft jt2

  • Houston, Texas, United States
  • Jun 9th
Nmtb 40 Taper Kwik Switch 200 Master Holder

Nmtb 40 Taper Kwik Switch 200 Master Holder

  • Wylie, Texas, United States
  • Jun 9th
Tapmatic 80-133 Tool Holder & 2 Enco 1154 33JT Drill Chucks Lightly Used

Tapmatic 80-133 Tool Holder & 2 Enco 1154 33JT Drill Chucks Lightly Used

  • Pensacola, Florida, United States
  • Jun 9th
NICE SUNNEN AN-600 LARGE BORE HONING HEAD

NICE SUNNEN AN-600 LARGE BORE HONING HEAD

  • Cleveland, Ohio, United States
  • Oct 25th
CHICAGO DIE CASTING 888 BEARING PULLEY MANDREL 1/2" X 5/8" SHAFT

CHICAGO DIE CASTING 888 BEARING PULLEY MANDREL 1/2" X 5/8" SHAFT

  • Valley Springs, California, United States
  • Oct 25th
BT30 Chuck Power Head 1.5KW 2HP Belt Spindle Head 3000rpm 5pcs Bearings Milling

BT30 Chuck Power Head 1.5KW 2HP Belt Spindle Head 3000rpm 5pcs Bearings Milling

  • Shenzhen, China
  • Nov 3rd
ER25 Power Head 1.5KW 2HP Milling Spindle Head 7pcs Bearings 3000rpm Milling

ER25 Power Head 1.5KW 2HP Milling Spindle Head 7pcs Bearings 3000rpm Milling

  • Shenzhen, China
  • Nov 3rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies