ESD black Laminate Bench Tops 30"x60"x1 1/4" Square Edge *Clearance*, US $125.00 – Picture 0

ESD black Laminate Bench Tops 30"x60"x1 1/4" Square Edge *Clearance*, US $125.00 – Picture 1

ESD black Laminate Bench Tops 30"x60"x1 1/4" Square Edge *Clearance*, US $125.00 – Picture 2

ESD black Laminate Bench Tops 30"x60"x1 1/4" Square Edge *Clearance*, US $125.00 – Picture 3

ESD black Laminate Bench Tops 30"x60"x1 1/4" Square Edge *Clearance*, US $125.00 – Picture 4

ESD black Laminate Bench Tops 30"x60"x1 1/4" Square Edge *Clearance*, US $125.00 – Picture 5

ESD black Laminate Bench Tops 30"x60"x1 1/4" Square Edge *Clearance*, US $125.00 – Picture 6

ESD black Laminate Bench Tops 30"x60"x1 1/4" Square Edge *Clearance*, US $125.00 – Picture 7

Esd Black Laminate Bench Tops 30"x60"x1 1/4" Square Edge clearance

US $125.00

Houston, Texas, United States
Mar 12th

Open on mobile:
QR code

Electro Static Dissipative and Chemical Resistant Tops 60x30x1.125 squared edge. http://www.wibenchmfg.com/index.php/products/phenolic-lab-tops.html Lab Tops Specifications:Thickness - 1"Material - Black phenolic resin Sizes - Up to 60" x 120" Edge Profile - 1/8" eased edge on all four sides Field Installation: Allow top to reach ambient room temperature prior to installation. It may take forty-eight (48) hours for the top to acclimate to the surrounding environment. Drilling - It is recommended to predrill an oversize holeto reduce stress cracks. Avoid drilling holes close to the edge and do not drill into the edges. Take into consideration the thickness of the top when selecting the screw length. Cutting - Saw blades and router bits should be carbide tipped and well sharpened. Tool speed should be high and feed rate slow to minimize possibility of chipping. Exposed edges may be finished by using coarse (80 grit)sandpaper to remove the saw striations followed by sanding with fine (180-220 grit) sandpaper. The edge can be polished with light oil or wax to give the glossy finish. PVA or epoxy adhesive at seams and joints will enhance chemical resistance at these locations. It is recommended to sand the backs prior to applying any adhesive. General Care & Maintenance: Surface can be cleaned with soapy water and common organic solvents (alcohol, benzine, acetone, methyl ethyl keytone, perchloroethylene). Avoid use of detergents with high concentrations of strong acids orbases (i.e. formic, hydrochloric, sulfuric and nitric acid). Do not use abrasive pads or powders which may causedamage. specifications Properties: High resistance to chemical agents and an excellent resistanceto water and steam. Resistance to Chemicals Resistant to diluted strong bases and acids. Easy to clean and disinfect, given its resistance to common lab cleaners: AcetoneToluenEtyhlic and Methylic Alcohol Dimethylformamide -DMF Dimethylsulphoxide -DMSO Detrahydrofuran -THF Turpentine Methyl Chetone Ammonia Caustic Soda Potassium Hydroxide, up to 10% Quick Overview High pressure electro static dissipative or chemical resistant laminate tops are the perfect answer for electronic assembly, dust-free environments for manufacturing of circuit boards and other sensitive work areas like hospitals, medical offices and laboratories. ESD tops are commonly used in worktops, tabletops in software development centers, assembly line rooms, research laboratories, call centers and general offices. Available in extensive sizes and three stock colors to complement your work area, our laminate tops are constructed with a phenolic or resin impregnated kraft backer sheet to balance the construction. Select a conductive electrostatic dissipative and chemical resistant surface high pressure laminate top to fit your design and application requirements. Our high-pressure laminate tops are available with several edge options, including our PVC in either square*, bullnose or modern front edge or square laminate all sides. FSC certified products Additional Information Electro static or chemical resistance surface laminate benchtops with either medium density fiberboard or particle board core and either phenolic or resin backer depending on thickness and edge selection of the top. Select from either .020" PVC edge or matching laminate edge. PVC: A machine-applied precision plastic edge is available in matching color. HPL: A machine-applied, high-pressure laminate (HPL) edge is available in matching or contrasting colors to suit your environment.

“Installed on workbenches but never used, they decided they wanted 36" instead of 30". So they have some holes drilled in them where they had attached the legs and hutch/Shelf.”

Brand	Wisconsin Bench
Country/Region of Manufacture	United States

Esd Black Laminate Bench Tops 30"x60"x1 1/4" Square Edge *clearance*

Esd Black Laminate Bench Tops 30"x60"x1 1/4" Square Edge clearance