Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 0

Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 1

Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 2

Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 3

Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 4

Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 5

Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 6

Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 7

Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 8

Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 9

Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 10

Etalon~Tesa DIGITAL Indicating Micrometer/ Centerless Grinder ~Machinist Tools, US $629.95 – Picture 11

Etalon~tesa Digital Indicating Micrometer/ Centerless Grinder ~machinist Tools

US $629.95

Palmdale, California, United States
Feb 24th

Open on mobile:
QR code

ETALON~TESA Inch/MM DIGITAL Dial Indicating Micrometer/ Grinding ~Machinist Tool Prev Stop Play Next Etalon~Tesa Swiss 1-2" / 25-50mm Electronic Digital Dial Indicating Micrometer with Mitutoyo 543-252B .000050" / 0,001mm Digital Electronic Indicator & Tesa Swivel Foam-Lined Micrometer Stand Very RARE! Very Clean, Gently Used Condition! Its Like getting 2 Etalon's in ONE! With Mitutoyo's Most Dependable & Accurate Indicator, Inch / Metric! and Electronic-Digital on top of that! Extra-Large and Bright LCD Display, that the Dial Face is Re-Positionable, Rotational & Programmable! To suit your visual needs... And SPC Capable! For your Data Collection Needs! ( Mitutoyo Data Cable Not Included, Easily obtainable on eBay! ). PLUS! Hands-Free TESA Micrometer Stand, Thats Foam Lined to preserve the paint of Etalon... *** This Etalon has Spring Loaded lower anvil, Just like the regular Etalon 1-2" / .000050" millionths Dial Indicating Mic. 72.109843, Exactly as if the indicator was in the Etalon... If you push the Retractor Button on Etalon, The Mitutoyo .000050" Indicator Moves.... Please Note: The Multi-Purpose Mitutoyo Digital Indicator stem fits in Etalon Lower Anvil Clamp Very, Very Snugly! So you see NO Deviations, When depressing Etalon Button to Retract Anvil... The Set Screw next to retraction anvil button on lower frame of Etalon, Is for Pressure/Tension of movable Anvil... These Etalon's are sold new, as sold by manufacturer Etalon ~ Tesa... NO Modifications Done to these! This Etalon is in very clean & gently used condition... ***** Unlimited + / - from Zero on Mitutoyo LCD Dial Screen! ***** The Tungsten-Carbide Faces on Etalon, are Flawless & Like New! with Original Micro-Lapped shine! NO Blemishes or Staining! Repeatability falls with in normal Etalon Specs. Mitutoyo Grade 0 Gage Blocks, Squeaks when passed thru Carbide Anvils, which means the Carbide Anvils are Perfectly Parallel to each other.. MPN Codes: 1-2" / .000050" Etalon 72.109843 > 25-50mm / 0,001mm Etalon 72.108691 > TESA Swivel Micrometer Stand 01.60201 Great for Quality-Control / Inspection Area... Because of the Convenience of SPC Data Collection Needs... ?? The Mitutoyo Grade 0 Gage Blocks .6000", .9000" and 1.0000" Inch Jo-Blocks, Are NOT Included in this Auction... Only Used for Display Purposes! NO Spindle-Lock Issues! Please view all pics. with 1.0000" & 1.5000" Gauge Blocks, the Spindle-Lock is Fully Engaged... ?? Please view all 24 Super-Sized Pictures for all 3 Items for Condition Details... ? NO Engravings or Etchings on Etalon Super Mic; and Mitutoyo 543-252B Digital Electronic Indicator. ? :¦:-• This (your) Etalon Dial Indicating Micrometer has been Professionally & Thoroughly cleaned, Calibrated, Checked for Accuracy and Lubricated with Starrett Tool & Instrument Oil as Necessary... And in A-1 condition & ready for your use... *** Also comes with Foam-Lined TESA-SWISS Re-Positionable Micrometer Stand, One Screw Locking System! with New General Electric Dependable Aircraft Engines Sticker, Showing a Eagle in Flight, Really Stunning & Awesome! NO CASES with this 3 peice Auction... Will be Packaged Extremely Secured! :¦:-• PLUS! Will throw in FREE! A New & Sealed Long Lasting DURACELL Silver-Oxide Lead Free Battery for your Digital Mitutoyo Indicator! For years of Uninterrupted Service... Specifications for series 225 indicating micrometer Specifications for series 225 indicating micrometer For Series 225 indicating micrometers (all models): • Anvil diameter: 6,5 mm • Anvil diameter: 2,0 mm for the pin anvil style • Repeatability error of the dial indicator: half of one graduation. • Maximum thread error: .00008" • Maximum dial indicator error: .00004" • Measuring surfaces flatness: .000012" • Maximum parallelism fault of measuring surfaces: .00004" (.00006" for 1-2" model) • Anvil pressure is between 4.5 and 5.5 N but can be adjusted to as little as 0.9 N (use a Correx gage to calibrate anvil pressure). Manufactured in French-speaking Switzerland, Etalon dial micrometers are indisputably the best quality micrometers. They can last a lifetime. Ask anyone who's ever owned one and you'll get nothing but raves. The indicating micrometer (aka dial micrometer and super mike) features a movable anvil (on the left, below) which is retracted by pushing the button on the far left. The spindle on the right is operated like any micrometer. When you use it to set the required dimension, and lock it in place, you will be able to make parts comparisons using the dial (.0001" or .00005"). The hand (needle) will show deviations. On the .00005" dial, there are graduations to .001" in either direction. The anvil diameter is 6.5 mm. These models have an improved spindle locking device which won't wear out like the old ones. Replaceable red and blue tolerance markers are adjustable and the dial can be rotated for fine adjustments. A built-in adjustable part support (also shown above) allows you to keep small parts at the right height, or it can be removed if it's in the way. This part support is not available with the pin-anvil model. ***The spindle is designed to turn hard compared to regular micrometers. This is because the spindle is normally preset and locked into place. Mitutoyo Digimatic Indicator Series 543-252B Mitutoyo's new IDC Series Digimatic Indicator presents error-free digital readings in measuements. Its unique ABSOLUTE LINEAR ENCODER keeps track of the origin point once set over the entire battery life, allowing the large LCD screen to display the actual spindle position fom the origin point at power on. Whenever turned on, the operator can take measurements with no need for preliminary absolute positioning. Completely Programmable! FEATURES: With max./min. value holding function model of the ID-C Series Digimatic Indicators. • The maximum, minimum, or runout value can be displayed during measurement. • GO/±NG judgment is performed by setting the upper and lower tolerances for max., min. and runout values. • High speed sampling ratio of 50 times/s. • Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on. SPC capable: Yes Technical Data: Accuracy: Refer to the list of specifications. Resolution: 0.001mm, .000050” / 0.001mm or .000050”millionths or 0.001mm Display: Extra-Large and Bright Numeral LCD Display. Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. response speed: Unlimited Measuring force: 1.5N or less Battery: SR44 (1 pc.), 938882 ***Plus you receive a Back-Up Silver-Oxide Duracell Battery Free! Battery life: Approx. 800 - 1300 hours under normal use Dust/Water protection level: IP42 Functions: Origin-set/Preset, Zeroset, GO/±NG judgment, Max/Min/Runout value holding, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (on inch/metric models only) Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error Optional Accessories 905338: SPC cable (40” / 1m) 905409: SPC cable (80” / 2m) 902011: Spindle lifting lever (ISO/JIS type) 902794: Spindle lifting lever (ANSI/AGD type) 540774: Spindle lifting cable (stroke: .4” / 10mm) Series 543-252B Mitutoyo’s leading-edge ABSOLUTE encoder never forgets its absolute origin throughout the entire battery life, unless it is otherwise preset for a different setup. It immediately indicates the absolute position of the spindle at power-on, ready to begin measuring. This technology also eliminates spindle over-speed error, a phenomenon that usually happens with incremental type indicators. Completely Programmable! FEATURES: • As compact as standard Series 2 dial indicators. • Large, easy-to-read LCD. • ZERO/ABS key: Allows the display to be Zero-Set at any spindle position for comparison measurements. This switch will also allow return to the absolute coordinate and display of the true position from the origin point. • GO/?NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO / NG) can be displayed in full-size characters. • The positive/negative count resulting from the spindle's up/ down movement can be toggled. • Unlimited response speed eliminates spindle over-speed errors. • The IDC indicator face can be rotated 330 degrees to an appropriate angle for easy reading. • The measurement data can be output to an external data processor using the optional SPC cable. ( Not Included ). Easily obtainable on eBay. ***Also comes with Foam-Lined TESA Re-Positional Micrometer Stand, with Bew General-Electric Dependable Aircaft Engines Sticker, Showing a Eagle in Flight, Really Stunning and Awesome! ?? If you were Going buy New all Items in this Auction, TWO Etalon's 1-2" and 25-50mm would cost $2,643.00 Alone! PLUS with the Electronic-Digital Mitutoyo Indicator $402.00 And a Hands-Free TESA Micrometer Stand $159.00 For a Total of: $3,204.00! ?? We are Asking a Quarter of Buy-It-Now Price! And we will Accept any Reasonable Offer! Doesn't get any Better than this!!! Here you have a chance to win all 3 pieces in one Auction! PLUS! Throw in a New & Sealed Long Lasting Duracell Silver-Oxide Lead Free Battery for the Digital Mitutoyo Indicator! For years of Uninterrupted Service... ?? Questions? Please Feel~Free to email us, Before you bid... Please view all actual item Super-Sized pictures & you be the judge... We have been working with & Repairing Etalons for 35+ years, So we know what we are talking about! We have sold probably 100 sets of Etalons on eBay since 2005, with-out a complaint... *** Make us a Reasonable Offer, You Never Know? *** This item will be carefully packaged, using premium packaging materials... To ensure safe transit to you... We have 3 other Etalon's listed, if you have the time take a look! Domestic Shipping & PayPal Only! •Sorry, NO International Shipping• ?? Immediate Payment Required, with Buy-It-Now! ?? We Do Not Accept PayPal E-Checks as payment, No Exceptions! Payment is Expected within 2 Days of Auction End! Unless prior arrangements are made & Approved by us.... We will ship USPS with Free Tracking Number, within 1 Business Day of PayPal Confirmed Payment... ?? Please be aware, that this item is also listed on eBid, And subject to prior sale! ?? ?? Please Check~Out our other Auctions, for High~Quality Name Brand Precision Tools! ? Thank You! For taking the time to view our Auctions, Good Luck! Copyright® Logical_Choice Intellectual Property Rights, All Proprietary Rights Reserved. Cannot use Images or Copy & Paste any part of Descriptions, With-Out Express Written Consent & Permissions from Logical_Choice.

“RARE! Digital Electronic Inch/Metric Like Getting 2 ETALON'S In One! Dial Indicating Micrometer! In Very Clean, Gently Used Condition! with Mitutoyo .000050"/0,001mm Electronic Digital Programmable Indicator 543-252B! and Tesa Micrometer Stand!”

Country/Region of Manufacture	Switzerland
MPN	72.109843 - 72.108691 - 01.60201
Manufacturer	Etalon, Tesa-Swiss & Mitutoyo
Etalon, Mitutoyo & Tesa	$3,204.00 - If Combined 1-2" and 25-50mm Etalon's
Model	Outside Digital Dial Indicating Mic.