Etcr6000 High Accuracy Leakage Current Sensor Clamp Meter Rs232 0ma-60.0a Ac/dc

US $168.00

Hefei, Anhui Province, China
Jan 29th

Open on mobile:
QR code

I. Introduction ETCR6000 AC/DC Clamp Leaker is specially designed for measurement of AC/DC current; by adopting up-to-date CT technology and digital integration technology. The small clamp is suitable for line densely places (electric power measurement system, the high speed rail system, car circuit overhaul, and so on), non-contact measurement, to ensure safe operation. It is a product with relatively small size, high accuracy and perfect function compared with similar leakers in the world. The leaker could be widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments. it is an essential tool for electrician safety testing. ETCR6000 AC/DC Clamp Leaker also named: DC Leakage Current Clamp Meter, Car DC Leakage Current Clamp Meter, AC/DC Clamp Leakage Current Tester. It has those functions as data holding and data storage. It obtains one RS232 interface, communication cable and software, through which historical data inquiry is available, for data reading, exporting and printing. II. Technical Specification Function Measurement of AC/DC current, leakage current Power Supply 6F22,9V Test Mode Clip-on CT, integral mode Clamp Size ?7mm Measurement Range 0mA-60.0A AC/DC Resolution 1mA AC/DC Accuracy ±2%rdg±5dgt (23°C±5°C, below 75%rh) Display Mode Four digits LCD display Dimension LWH: 168mmx65mmx34mm LCD Dimension 35mmx21.5mm; display domain: 32mmx15mm Sampling Rate 2 times/s Frequency AC: 45Hz-400Hz Polarity Indication DC current auto identified and display“—” Test Position Tested wire in the jaw center Range Shift Automatically Line Voltage AC600V RS232 Interface Data stored in the memory of the meter via RS232 upload to PC Com-Configure Baud rate:9600, data bit:8, stop bit:1 Data Memory 99units, FULL blinks when the memory is full Reading Hold DH indicating the reading is hold Out of Range OL indicating the current is out of range Auto Power-off 5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed Weight 180g (Without battery for air shipping security reason) Working Current 10mA Consumption 10mW Working Temperature and Humidity -10°C-50°C,below 80%rh Limit Temperature Error -10°C-0°C and 40°C-50°C, within 2%rdg Storage Temperature and Humidity -10°C-60°C,below 70%rh Insulating Strength AC2kV/rms (between the alloy of the clamp and the housing) Applicable safety rules IEC1010-1, IEC1010-2-032, Pollution level 2, CAT III(600V) III. Field Application Note: Make sure your address, phone number left on the order is correct, especially if you are from Russia, please fulfil your full name as Russian Custom requested. Custom duty: could be charged in destination country in a very small possibility, I will try to make the declare value as lower as possible to decrease the possiblity in further, however if it happens, it should be respond of buyers.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	ETCR
Country/Region of Manufacture	China
Model	ETCR6000
Country of Manufacture	China