This is an Exalt EX-5i-DS3 Tri-band Wireless Backhaul Microwave Radio Interface type: 10/100BaseT + 16xT1/E1 + 1xDS3 AC Power. PN: 201133-002 This was pulled from a working system This unit has BAD PORT marked on PORT # 4 & 13. Not sure what is wrong with it. It also is missing the little plastic RMT push button. 90 Day Hardware Warranty (besides the 2 bad ports mentioned) Free Fedex Ground Shipping in the lower 48 States. Let me know if you have any questions M-F 9:00-5:00 PST (503) 391-8191 x 118 Here is the boot up: 1. Radio information 2. Configuration 3. Status 4. Exit 9. Help Select from 1 to 4, 9: 1 Model name: EX-5i-DS3 Part number: 201133-002 Serial number: EC1XXXX308 Interface type: 10/100BaseT + 16xT1/E1 + 1xDS3 Firmware version: 1.0.2 (Jan 21 2009 - 09:06:19) RF frequency band: 5.250 GHz - 5.850 GHz Hardware ID number: ddc67a4c5f2XXXXX 1. Radio information 2. Configuration 3. Status 4. Exit 9. Help Select from 1 to 4, 9: 1. Current IP settings 2. Current system configuration 3. Set endpoint identifier 4. Set IP parameters 5. Administration 0. Back/9. Help Select from 0 to 5, 9: 2 SYS: Radio B SYS: mode: Mode 1 (QPSK) SYS: tx_power: 24.000000 dBm SYS: bandwidth: 32 MHz SYS: rf_freq: 5.819000 GHz SYS: link distance: 5 miles SYS: tdd_frame_size: 2.000000 ms SYS: dfs_ant_gain: 29 dB SYS: ext_alarm_input_1: Alarm when close SYS: ext_alarm_input_2: Alarm when close Press enter to continue... Eth: channel:1 Eth: enable:2 Eth: mode: 100 full duplex Eth: alarm_enable:1 Eth: channel:2 Eth: enable:1 Eth: mode: 100 full duplex Eth: alarm_enable:1 Press enter to continue... T/E1: channel:1 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:2 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:3 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:4 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:5 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:6 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:7 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:8 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:9 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:10 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:11 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:12 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:13 T/E1: status: Disable T/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:14 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:15 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS T/E1: channel:16 T/E1: status: EnableT/E1: lbo: 0-133 ft T/E1: ais: Disable T/E1: line code: B8ZS Press enter to continue... 1. Current IP settings 2. Current system configuration 3. Set endpoint identifier 4. Set IP parameters 5. Administration 0. Back/9. Help Select from 0 to 5, 9: The EX-5i series of all-indoor digital microwave radios is the first family of carrier-class, tri-band TDD radios available in the 5.2 – 5.8 GHz license-exempt bands. The EX-5i line delivers up to 216 Mbps of aggregate user throughput and up to sixteen T1/E1s plus one DS3. Featuring native TDM and native Ethernet transport and full software configurability and upgradeability, the EX-5i series was designed to meet demanding backhaul requirements of enterprise organizations and service providers seeking the accessibility benefits of an all-indoor configuration. Carrier-class TDD. The EX-5i series radios combine native TDM and native Ethernet transport with low, fixed latency to deliver guaranteed throughput and service quality. Capacity can be allocated variably between TDM and Ethernet via software, while the selectable throughput symmetry control feature enables radio capacity to efficiently match asymmetric traffic requirements. Optional 1+1 monitored hot standby (MHS) protection provides full hardware redundancy
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.