Excelyte / Ecaflo Anolyte Hypochlorous Acid Disinfectant Sanitizer 275 Gal Tote

US $1,540.00

Little River, South Carolina, United States
Jan 29th

Open on mobile:
QR code

One (1) 275-Gallon Tote (IBC) of Excelyte® This tote is shipped via freight from our loading dock in Little River, SC. You may pick up at no cost, make your own freight arrangements at your cost, or we can make freight arrangements for you. If you are located at a commercial address and have a loading dock or fork lift on your end to remove the tote from the back of a tractor trailer, freight charges will be $687.50. You can add $687.50 and pay now ($1540 + $687.50 = $2227.50), or wait for an invoice to be sent to you. If you have a residential address and/or need a trailer with a lift gate (no loading dock or forklift), the cost will be slightly higher and you will need to wait for an invoice to be sent before making payment. Please send a note indicating any special needs. Check additional listings or call for other sizes to include cases, quarts, gallons, small sprayers and pens, pails and drums. Product sometimes shipped same business day as payment, but always shipped by the following business day after the business day in which payment is received during business hours. Product must be used within 30 days of production. Product is usually shipped the same day or day after production, but is always shipped within two days of production. Excelyte® is an activated aqueous solution of sodium chloride produced by passing weak salt brine through an electrolytic cell and temporarily changing the properties of the salt water into a powerful oxidizing agent exhibiting antimicrobial properties. Excelyte® is produced at a near neutral 6.5 pH where the predominant antimicrobial agent is hypochlorous acid, an efficient and efficacious specie of chlorine. Hypochlorous acid kills bacteria. The properties of Excelyte® (sometimes called Anolyte) produced through the electro-chemical activation (ECA) process are precisely controlled by manipulating power to the electrolytic cell, brine flow rate through the cell and the conductivity of the brine in the cell. Excelyte® can be applied as a liquid or spray. Excelyte® freezes at 32? F and boils at 212? F. Anolyte is a colorless, aqueous solution, with a slight chlorine or ozone odor. After production, Excelyte® must be stored in a closed, plastic container in a cool, dark area away from direct sunlight. Anolyte is intended to be used soon after being produced. The Anolyte product must be used within 30 days of production. Product is usually shipped the same day or day after production, but is always shipped within two days of production. Ready-to-Use Hospital Disinfectant Active ingredient HOCl derived from naturally-occurring salt minerals and water. A New Generation of Disinfectant Cleans, Deodorizes, Disinfects, and Kills: • Clostridium difficile (C. diff) spores • Mycobacterium bovis (Tuberculosis) • Human Immunodeficiency Virus Type 1 (HIV-1) • Klebsiella pneumonia New Delhi (NDM-1) Carbapenem Resistant • Methicillin Resistant Staphylococcus aureus (MRSA) • Vancomycin Resistant Enterococcus faecalis (VRE) (See organism tables for additional organisms) This product meets AOAC efficacy testing standards for hospital disinfection. Meets requirements of OSHA’s Bloodborne Pathogen Guidelines. KEEP OUT OF REACH OF CHILDREN NET CONTENTS: 275 U.S. Gallons Excelyte® cleans and disinfects: hospitals, clinics, ambulances, emergency rooms, dentist’s offices, home health care settings, retirement homes, correctional facilities, dormitories, schools, day care centers, gymnasiums, locker rooms, hotels, cruise ships, airplanes, trains, theaters, stadiums, food processing plants, restaurants, bars, grocery stores, veterinary facilities, kennels, pet shops, office buildings, public facilities, and homes. Manufactured by: I.E.T., Inc. 4235 Commerce St, Little River, SC 29566 (843) 390-2500 info@ietltd.net EPA Reg. No. 82341-1 EPA Est # 82341-SC-1 NSF Reg. No. 141871 and 142320 NSF Category Code D2 - Antimicrobial agents not requiring a rinse Excelyte® must be used within 30 days after being produced. Product shipped within two days of production. ACTIVE INGREDIENT: Hypochlorous Acid ………… 0.046% OTHER INGREDIENTS: ….. 99.954% TOTAL: ….. 100.000% Contains 500 ppm Free Available Chlorine Environmental Commitment This product rapidly breaks down entirely to salt water. Not harmful to septic and sewer systems. This bottle is coded for recyclers. Check to see if recycling facilities accept colored HDPE. Contains no phosphorous, VOCs, alcohol or phenols. Low Odor. Fresh and clean scent. DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. DISINFECTION APPLICATIONS Hard Non-Porous Surface Disinfection: To Clean, Disinfect and Deodorize Hard, Non-Porous Surfaces: For heavily soiled areas, a preliminary cleaning is required. Apply, Wipe, Spray or Dip Excelyte® at 500 ppm FAC to hard, non-porous surfaces with a cloth, wipe, mop or sponge. Treated surfaces must remain wet for 10 minutes. Allow surfaces to air dry. This product is not to be used as a terminal sterilant/high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to pre-clean or decontaminate critical or semi-critical devices prior to sterilization or high-level disinfection. Special Instructions for Cleaning Prior to Disinfection against Clostridium difficile endospores Personal Protection: Wear appropriate barrier protection such as gloves, gowns, masks, or eye covering. Cleaning Procedure: Fecal matter/waste must be thoroughly cleaned from surfaces/objects before disinfection by application with clean cloth, mop, and/or sponge saturated with product intended for disinfection. Cleaning should include vigorous wiping and/or scrubbing, until visible soil is removed. Special attention is needed for high-touch surfaces. Surfaces in patient rooms are to be cleaned in an appropriate manner, such as from right to left or left to right, on horizontal surfaces, and top to bottom, on vertical surfaces, to minimize spreading of the spores. Restrooms are to be cleaned last. Do not reuse soiled cloths. Infectious Materials Disposal: Cleaning materials used that may contain feces/wastes should be disposed of immediately in accordance with local regulations for infectious materials disposal. For Killing Clostridium difficile spore: Clean hard, non-porous surfaces by removing gross filth, loose dirt, debris, blood/bodily fluids, etc. Apply this product and let stand for 10 minutes. Special Instructions for Using this product to Clean and Decontaminate against HIV on Surfaces/Objects Soiled with Blood/Body Fluids This product kills HIV-1 on precleaned environmental surfaces/objects previously soiled with blood/body fluids in health care settings (e.g. hospitals, nursing homes) or other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood or body fluids, and in which the surfaces/objects likely to soiled with blood or body fluids can be associated with the potential for transmission of Human Immunodeficiency Virus Type 1 (HIV-1) associated with AIDS. Personal Protection: When handling items soiled with blood or body fluids, use appropriate barrier protection such as disposable latex gloves, gowns, masks, and eye coverings. Cleaning Procedure: Blood and other body fluids must be thoroughly cleaned from surfaces and other objects before applying this product. Contact Time: Apply this product to area to be treated. Let stand for 10 minutes. Cleaning materials used that may contain feces/wastes should be disposed of immediately in accordance with local regulations for infectious materials disposal. Disposal of Infectious Material: Blood and other body fluids must be autoclaved and disposed of according to local regulations for infectious waste disposal. Organism Table for Disinfection Applications Contact Time: 10 minutes Bacteria Clostridium difficile – spore (C. Diff) (ATCC 43598) Escherichia coli (ATCC 11229) Klebsiella pneumonia New Delhi Metallo-Beta Lactamase (NDM-1) Carbapenem Resistant, CDC 10002 Listeria monocytogenes (ATCC 7644) Methicillin Resistant Staphylococcus aureus (MRSA) (ATCC 33591) Pseudomonas aeruginosa (ATCC 15442) Salmonella enterica (ATCC 10708) Staphylococcus aureus (ATCC 6538) Vancomycin Resistant Enterococcus faecalis (ATCC 51229) Mycobacterium Mycobacterium bovis, BCG (Tuberculosis or TB) Viruses Enveloped Human Immunodeficiency Virus Type 1 (HIV-1), strain IIIB (clade B); ZeptoMetrix Swine Flu Virus (H1N1) A/Swine/1976/31 (ATCC VR-99) Bloodborne Pathogens Human Immunodeficiency Virus Type 1 (HIV-1), strain IIIB (clade B); ZeptoMetrix Food-Contact Surface Bacteria Listeria monocytogenes (ATCC 7644) SANITIZING APPLICATIONS Excelyte® is an effective multi-purpose sanitizer that kills bacteria that may cause food poisoning. This product is acceptable as a sanitizer for all surfaces not always requiring a rinse in and around food processing areas. Hard, Non-Porous Non-Food Contact Surfaces: To Sanitize Surfaces: For heavily soiled areas, a preliminary cleaning is required. Dilute 1:1.5 with Water to prepare a 200 ppm FAC solution. Use chlorine test strips to adjust to desired chlorine level. Apply sanitizing solution with cloth, mop, sponge, spray or immersion. Treated surfaces must remain wet for 2 minutes. Allow surfaces to air dry. This product kills 99.9% of bacteria on dirty surfaces in two minutes. To deodorize: Spray on surfaces as needed. Hard, Non-Porous Food Contact Surfaces: To Sanitize Surfaces: Wash, wipe, or rinse items with detergent and water, then apply 200 ppm sanitizing solution. Let stand 1 minute and wipe dry with clean towel or allow to air dry. Organism Table for Sanitizing Applications Non-Food Contact Surface Bacteria; Contact Time: 2 minutes Enterobacter aerogenes (ATCC 13408) Staphylococcus aureus (ATCC 6538) Food-Contact Surface Bacteria; Contact Time: 60 seconds Salmonella enterica (ATCC 6539) Staphylococcus aureus (ATCC 6538)

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Excelyte
Country of Manufacture	United States
MPN	E275G