+ Post new Ad
Extension - tool holder, US $20.00 – Picture 0
Extension - tool holder, US $20.00 – Picture 0

Extension - Tool Holder

US $20.00

  • Sherman Oaks, California, United States
  • Jan 30th
Open on mobile:
QR code
 You are bidding the extension - tool holder made by a special order. This extension was designed and fabricated to be able drill holes where the original drill length is not enough. The overall length is 9.00" The shank diameter is .9999" +.0000/-.0005 The shank length is 2.75". Have flat area 2.50" long for clamping screws. The rest of the body is 0.825" diameter. The end opposite to the shank have a hole to adopt either drill, rim, mill or something else. This hole is 0.500" +.001/-.000 diameter and 2.50" deep. This end also have two threaded holes 5/16-24 UNF for clamping set screws. The screws are not available. The run-out between shank (datum) and the center hole is 0.001 Material: steel 4340; Rc 38-42 Black oxide. Available more then one.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer cfd manufacturing co.
Model n/a
Brand special
Country/Region of Manufacture United States

Directions

Similar products from Prolongation Tools

CARBOLOY DA 100 1" SHANK COLLET CHUCK EXTENSION 43577 (LOC1138C) TS5

CARBOLOY DA 100 1" SHANK COLLET CHUCK EXTENSION 43577 (LOC1138C) TS5

  • Laingsburg, Michigan, United States
  • Jan 30th
ERICKSON DA 100 1" SHANK COLLET CHUCK EXTENSION 2 10 037 (LOC1138D) TS5

ERICKSON DA 100 1" SHANK COLLET CHUCK EXTENSION 2 10 037 (LOC1138D) TS5

  • Laingsburg, Michigan, United States
  • Jan 30th
SANDVIK VARILOCK EXTENSION 391.01S 12 50 50 030 (LOC1138A) TS5

SANDVIK VARILOCK EXTENSION 391.01S 12 50 50 030 (LOC1138A) TS5

  • Laingsburg, Michigan, United States
  • Jan 30th
SET OF 7 WALTON TAP EXTENSIONS STRAIGHT SHANK SIZE 0-6 TO 3/8"

SET OF 7 WALTON TAP EXTENSIONS STRAIGHT SHANK SIZE 0-6 TO 3/8"

  • Jamestown, New York, United States
  • Jan 30th
MORSE TAPER 4 EXTENSION 10.5" OAL 6 644 (LOC1154A) TS11

MORSE TAPER 4 EXTENSION 10.5" OAL 6 644 (LOC1154A) TS11

  • Laingsburg, Michigan, United States
  • Jan 30th
New 1pc 60mm Long Dia 16mm PTFE Teflon Round Rod Bar Dia 16mm

New 1pc 60mm Long Dia 16mm PTFE Teflon Round Rod Bar Dia 16mm

  • Jiaxing City, ???, China
  • Jan 30th
CRAFTSMAN ER 32 COLLET EXTENSION 1.5" SHANK 6" OAL SPH ER32 1500 (LOC1142A) TS11

CRAFTSMAN ER 32 COLLET EXTENSION 1.5" SHANK 6" OAL SPH ER32 1500 (LOC1142A) TS11

  • Laingsburg, Michigan, United States
  • Jan 30th
CRAFTSMAN ER 25 COLLET EXTENSION 1.25" SHANK SPH ER25 1250 (LOC1141B) TS11

CRAFTSMAN ER 25 COLLET EXTENSION 1.25" SHANK SPH ER25 1250 (LOC1141B) TS11

  • Laingsburg, Michigan, United States
  • Jan 30th
Lot of 4 Tap Extensions, 5" The Walton Co & Allen Mfg Co 1/2 3/8 5/16 1/4

Lot of 4 Tap Extensions, 5" The Walton Co & Allen Mfg Co 1/2 3/8 5/16 1/4

  • Stamford, Connecticut, United States
  • Jan 30th
JACOBS 854 Socket, Extension

JACOBS 854 Socket, Extension

  • Naperville, Illinois, United States
  • Jan 30th
MT4 TO MT5 EXTENSION SLEEVE LATHE / DRILL / MILLING

MT4 TO MT5 EXTENSION SLEEVE LATHE / DRILL / MILLING

  • Baton Rouge, Louisiana, United States
  • Jan 30th
COLLIS TG100 COLLET CHUCK EXTENSION STK 1023

COLLIS TG100 COLLET CHUCK EXTENSION STK 1023

  • Wadley, Alabama, United States
  • Jan 30th
MEDA EXTENSION SOCKET 4 TO 3MT

MEDA EXTENSION SOCKET 4 TO 3MT

  • Wadley, Alabama, United States
  • Jan 30th
SECO DA 100 COLLET EXTENSION 7-1/4" OAL EXT100 43577 (LOC1045A)

SECO DA 100 COLLET EXTENSION 7-1/4" OAL EXT100 43577 (LOC1045A)

  • Laingsburg, Michigan, United States
  • Jan 30th
SECO DA 300 COLLET EXTENSION 7" OAL EXT500 43580 (LOC1143B)

SECO DA 300 COLLET EXTENSION 7" OAL EXT500 43580 (LOC1143B)

  • Laingsburg, Michigan, United States
  • Jan 30th
SECO DA 200 COLLET EXTENSION 7-1/4" OAL EXT750 43582 (LOC1045A)

SECO DA 200 COLLET EXTENSION 7-1/4" OAL EXT750 43582 (LOC1045A)

  • Laingsburg, Michigan, United States
  • Jan 30th
SECO DA 200 COLLET EXTENSION 7-1/4" OAL EXT750 43582 (LOC1143B)

SECO DA 200 COLLET EXTENSION 7-1/4" OAL EXT750 43582 (LOC1143B)

  • Laingsburg, Michigan, United States
  • Jan 30th
1-2 MT SOCKETS SLEEVES COLLIS #2452A

1-2 MT SOCKETS SLEEVES COLLIS #2452A

  • Resaca, Georgia, United States
  • Jan 30th
EXTENSION SLEEVE SOCKET #4 MT MALE #2 MT FEMALE 9-5/16 OVERALL LENGTH #2880A

EXTENSION SLEEVE SOCKET #4 MT MALE #2 MT FEMALE 9-5/16 OVERALL LENGTH #2880A

  • Resaca, Georgia, United States
  • Jan 30th
EXTENSION SLEEVE #4 MORSE TAPER SHANK TO #1 MORSE TAPER SOCKET #7775

EXTENSION SLEEVE #4 MORSE TAPER SHANK TO #1 MORSE TAPER SOCKET #7775

  • Resaca, Georgia, United States
  • Jan 30th

People who viewed this item also vieved

ER32 COLLET 3PC COMMON SIZE 5/16" NEW

ER32 COLLET 3PC COMMON SIZE 5/16" NEW

  • Naperville, Illinois, United States
  • Jun 4th
Command C4E5-1500 1-1/2" End Mill Holder CAT-40 V-Flange Shank 5-7/8 Nose

Command C4E5-1500 1-1/2" End Mill Holder CAT-40 V-Flange Shank 5-7/8 Nose

  • Lorain, Ohio, United States
  • Jun 4th
INDEXABLE DRILL 5/8"DIAM{.625"} 5XD COOLANT THRU WALTER XTRA-TEC USA NEW $106.03

INDEXABLE DRILL 5/8"DIAM{.625"} 5XD COOLANT THRU WALTER XTRA-TEC USA NEW $106.03

  • North Tonawanda, New York, United States
  • Jun 6th
INDEXABLE DRILL 41/64"DIAMETER 3XD COOLANT THRU WALTER XTRA-TEC USA NEW $106.00

INDEXABLE DRILL 41/64"DIAMETER 3XD COOLANT THRU WALTER XTRA-TEC USA NEW $106.00

  • North Tonawanda, New York, United States
  • Jun 6th
CRITERION MT5-150018 Shank & Adapter, Taper:5 MT

CRITERION MT5-150018 Shank & Adapter, Taper:5 MT

  • Duncan, South Carolina, United States
  • Jun 6th
Morse Taper Extension Sleeve MT2 to MT4 9" AOL

Morse Taper Extension Sleeve MT2 to MT4 9" AOL

  • Middlebury, Indiana, United States
  • Jun 6th
D20 00540 BORING CARTRIDGE TX8 - KOMET (B-5-8-4-7-OFG)

D20 00540 BORING CARTRIDGE TX8 - KOMET (B-5-8-4-7-OFG)

  • Mitchell, Indiana, United States
  • Jun 6th
SANDVIK Coromant L154.91-25-3 Round Shank Steel

SANDVIK Coromant L154.91-25-3 Round Shank Steel

  • Smyrna, Tennessee, United States
  • Jun 6th
NEW NO NAME BRASS BRONZE BUSHING 0912-08 9/16" ID 3/4" OD 1" WIDTH

NEW NO NAME BRASS BRONZE BUSHING 0912-08 9/16" ID 3/4" OD 1" WIDTH

  • Clover, South Carolina, United States
  • Jun 7th
NEW BROWNING Q2-1 BUSHING SPLIT TAPER, NEW IN BOX, NEW OLD STOCK

NEW BROWNING Q2-1 BUSHING SPLIT TAPER, NEW IN BOX, NEW OLD STOCK

  • Rockingham, North Carolina, United States
  • Jun 7th
Metaltech, High Speed Milling Chuck Tool Holder XTech+ 16, BT40, 16x80mm, New

Metaltech, High Speed Milling Chuck Tool Holder XTech+ 16, BT40, 16x80mm, New

  • Miami, Florida, United States
  • Jun 8th
7/8" End Mill Tool Holder w/ 3/4" 2-Flute End Mill NMTB-30 Taper Shank

7/8" End Mill Tool Holder w/ 3/4" 2-Flute End Mill NMTB-30 Taper Shank

  • Lorain, Ohio, United States
  • Jun 8th
1 3/4" - 5 X 3" LEFT HAND HIGH SPEED STEEL ROUND ADJUSTABLE DIE

1 3/4" - 5 X 3" LEFT HAND HIGH SPEED STEEL ROUND ADJUSTABLE DIE

  • Petaluma, California, United States
  • Jun 10th
TSD UNIVERSAL MAX FLOAT ACURA FLEX MILL MILLING COLLET CHUCK W/ 3/4" SHANK

TSD UNIVERSAL MAX FLOAT ACURA FLEX MILL MILLING COLLET CHUCK W/ 3/4" SHANK

  • Chino, California, United States
  • Jun 10th
Vintage Jacobs Drill Chuck No. OB 0B 0-5/32 with key no shank

Vintage Jacobs Drill Chuck No. OB 0B 0-5/32 with key no shank

  • Hadley, Pennsylvania, United States
  • Jun 15th
JACOBS USA 3326A Chuck 5/64"-1/2" Capacity 5/8" Straight Taper Groove Slot Mount

JACOBS USA 3326A Chuck 5/64"-1/2" Capacity 5/8" Straight Taper Groove Slot Mount

  • Romulus, Michigan, United States
  • Jun 15th
Aloris BXA Super Precision Tool Post for Lathes

Aloris BXA Super Precision Tool Post for Lathes

  • Hamburg, New Jersey, United States
  • Jun 18th
ALORIS BXA1 TOOL HOLDER #2

ALORIS BXA1 TOOL HOLDER #2

  • Hamburg, New Jersey, United States
  • Jun 18th
SUNNEN 5PL-1562 HONING MANDREL KING PIN TOOL

SUNNEN 5PL-1562 HONING MANDREL KING PIN TOOL

  • Hurdle Mills, North Carolina, United States
  • Nov 11th
Sunnen 1PL-1125 Honing Mandrel Unit

Sunnen 1PL-1125 Honing Mandrel Unit

  • Council Grove, Kansas, United States
  • Nov 11th
400w ER11 12000RPM BLDC spindle motor&PWM MACH3 Driver

400w ER11 12000RPM BLDC spindle motor&PWM MACH3 Driver

  • DongGuan, China
  • Nov 12th
500W ER11 3000-12000RPM DC Brushed spindle motor&PWM

500W ER11 3000-12000RPM DC Brushed spindle motor&PWM

  • DongGuan, China
  • Nov 12th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies