Up for Auction is a Fast T-Jet 2 with basically everything included. Please read the entire listing for full details and be sure you know what you are bidding on before you bid. The machine has had cleaning solution run through the print head, the ink lines, and cartridges. The inside of the machine could use a good cleaning. This setup is basically a business in a box for someone who is just starting into the DTG world. However, I would only purchase this listing if you already know what you are doing or if you already have one of these machines or one similar. All software and cables and hardware needed to make this machine run are all included. All you should have to do is install the software, install the ink system and run the machine. However, I make no guarantees that the print head has survived the process of cleaning and boxing although it was working at 100% when I cleaned it out prior to boxing. ALL ITEMS INCLUDED IN THIS LISTING ARE: #1 - The Fast T-Jet 2 Printer with a working print head installed (although I make NO guarantees on the print head since it was in operation for over 6 months, but it was working before I did a full cleaning of the head and nozzles) The printer has everything attached and installed that it needs to run (the ink system of coarse needs to be installed but is still included) #2 - An extra used but working Ribbon Cable (I was told I needed one with my first head replacement but then realized it wasn't necessary) #3 - An extra used but working encoder strip #4 - 3 Shirt platens. 1 is adult size which is roughly 12x18. 1 is youth size that is roughly 8x11. and 1 that we custom built for onesies that is about 6x6 or so. -The adult and youth size platens are the ones that were built FOR this machine. They retail for about $140 each. #5 - A bulk ink system that takes bagged inks. it includes the platform and It has CMYK lines and 3 white lines. It also has all the corresponding cartridges. -The cartridges have all been flushed prior to boxing and packaging but may not have been 100% perfect. #6 - Several bags of both used and brand new inks including: A: Brand New not Sealed Black 250 ml B: Brand New Sealed Magenta 250 ml C: Brand New Sealed Yellow 250 ml D: 3 bags of USED White that are about 50% or so each of 250 ml bags E: A full set of used CMYK bags that are all close to 50% each of the 250 ml bags (so 4 bags at almost 50% each) #7 - Full set of fully working Cleaning Cartridges (which are currently installed over the print head) #8 - About 150 or so sheets of Teflon coated paper to protect your heat press and about 25 sheets of not coated paper for pre-treating. #9 - Fast Artist Software and Manual WITH the dongle to use it (the dongle retails for over $1000.00 by itself is what I am told) #10 - User guide for the machine on how to run it and how to perform maintenance and troubleshoot. #11 - Printed paper instructions on how to replace print head and capping station #12 - Training discs on how to set up the machine. #13 - A dual humidity gauge (reads humidity at location and has a little box to read a second location). #14 - The leveling bar that you set on the print bed to bring the shirt to the right level. #15 - 3 USED Printheads that either have a bad print channel or were replaced on suspicion of being bad. Most likely they are bad but are still included (these 3 are in addition to the one that is currently installed. #16 - 1 USED partly broken Capping station IN ADDITION TO the one that is currently installed. #17 - misc items such as extra fuses, large cleaning syringes, mechanics picks, and more. It is possible that I excluded some items from this list but I think I got everything. I WILL NOT ACCEPT ANY RETURNS OR REFUNDS ON THIS ITEM. IF YOU BID AND WIN, THE ITEM IS YOURS. If you win please remit payment within 24 hours of auction end, that would just make my life easier :) I also make no claims for the shipper of this item, all shipping claims will need to be taken up with the shipper. Once it leaves my facility you are responsible for it. I am more than happy to answer any questions that you may have and I will do my best to answer them promptly. I have packaged everything inside of a constructed wood box and have taken care to wrap everything in bubble wrap to the best of my ability. There should be no issues with any items becoming damaged. THERE WILL BE ABSOLUTELY NO INTERNATIONAL SHIPPING ON THIS ITEM please stay within the contiguous 48 states. Again, I would like to clarify that I make no claims regarding the functionality of this printer BESIDES the fact that it WAS working prior to the cleaning, packaging, and boxing of the machine. The inside of the machine right now could use a good cleaning but was being used almost daily for the last 3 years. The current print head that is installed on the machine is the 4th print head that I have installed on this printer and it has been in use for over 6 months. I have never replaced the main board on this machine. I have replaced the capping station 1 time. I have replaced the encoder strip 3 times. I have never replaced the drive belt or gear. Thank you for viewing my auction, if you have any questions don't hesitate to contact me and HAPPY BIDDING!!!!!!
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
