+ Post new Ad
Federal Pocket Surf 111 GC, US $380.00 – Picture 0
Federal Pocket Surf 111 GC, US $380.00 – Picture 1
Federal Pocket Surf 111 GC, US $380.00 – Picture 0
Federal Pocket Surf 111 GC, US $380.00 – Picture 1

Federal Pocket Surf 111 Gc

US $380.00

  • Warren, Michigan, United States
  • Mar 12th
Open on mobile:
QR code
MAHR FEDERAL POCKET SURF III SURFACE ROUGHNESS ANALYZER over :$2000  From the Factory Perfect  unit works Good Description: *Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory. *Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging. *Can be used to measure any one of four, switch-selectable, parameters: Ra , Rmax/Ry , Rz. *Operates in any position – horizontal, vertical, and upside down *Four switch able probe positions – axial (folded) or at 90°, 180° or 270° *Even difficult-to-reach surfaces such as inside and outside diameters are accessible *Easy-to-read LCD readout presents the measured roughness value, in micro inches or micrometers, within half a second after the surface is traversed. Out-of-range (high or low) and “battery low“ signals are also displayed The master in the pic is just to show it reads right Unit has scratches that is why its priced so cheap works great As you can see with my  feedback im a real 100% straight up seller
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Federal
industry type Machining
Type Pocket Surf

Directions

Similar products from Other Measuring & Monitoring Tools

Renishaw Probe MP 3 40 Taper

Renishaw Probe MP 3 40 Taper

  • Auburn Hills, Michigan, United States
  • Mar 12th
C.E. Johansson Mikrokator 509 E-55 Mechanical Comparator

C.E. Johansson Mikrokator 509 E-55 Mechanical Comparator

  • Bay City, Michigan, United States
  • Mar 12th
Starret Mag Base Ind Holder 659a

Starret Mag Base Ind Holder 659a

  • Scranton, Pennsylvania, United States
  • Mar 12th
12 X 12 INCH PRECISION FRAME SPIRIT LEVEL (4901-0007)

12 X 12 INCH PRECISION FRAME SPIRIT LEVEL (4901-0007)

  • Chino, California, United States
  • Mar 12th
8 X 8 INCH PRECISION FRAME SPIRIT LEVEL (4901-0078)

8 X 8 INCH PRECISION FRAME SPIRIT LEVEL (4901-0078)

  • Chino, California, United States
  • Mar 12th
CLECO MODEL H-1650 HAND TORQUE TOOL ANALYZER WITH TOOLS IN CASE

CLECO MODEL H-1650 HAND TORQUE TOOL ANALYZER WITH TOOLS IN CASE

  • Grafton, Wisconsin, United States
  • Mar 12th
Vintage Pair of Starrett trammel points No. 50a Nice

Vintage Pair of Starrett trammel points No. 50a Nice

  • Carleton, Michigan, United States
  • Mar 12th
Mitutoyo No. 64AAA016 SPC Connecting Cable

Mitutoyo No. 64AAA016 SPC Connecting Cable

  • Tempe, Arizona, United States
  • Mar 12th
Vintage 6" drawknife Nice

Vintage 6" drawknife Nice

  • Carleton, Michigan, United States
  • Mar 12th
VTG STARRETT No. 59 TRAMMEL Heads Points Machinist Woodworking - PAIR

VTG STARRETT No. 59 TRAMMEL Heads Points Machinist Woodworking - PAIR

  • Taunton, Massachusetts, United States
  • Mar 12th
Spi Optical Center Punch Percision Layout Tool Machinist

Spi Optical Center Punch Percision Layout Tool Machinist

  • Clermont, Florida, United States
  • Mar 12th
Stainless Steel 0.02mm to 1mm Thickness Gap Metric Filler Feeler Measuring Gauge

Stainless Steel 0.02mm to 1mm Thickness Gap Metric Filler Feeler Measuring Gauge

  • ??, China
  • Mar 12th
Screw Thread Pitch Measuring Microscope with rotating Metric/Inch/Degree Scale

Screw Thread Pitch Measuring Microscope with rotating Metric/Inch/Degree Scale

  • Ukraine, Ukraine
  • Mar 11th
trammel points feeler gauge dividers square measuring layout fabricating

trammel points feeler gauge dividers square measuring layout fabricating

  • Hopatcong, New Jersey, United States
  • Mar 11th
STARRETT DEPTH MIC 3” BASE 3445 W/CASE - USED

STARRETT DEPTH MIC 3” BASE 3445 W/CASE - USED

  • Labelle, Florida, United States
  • Mar 11th
Craftsman 40254 Vernier Caliper Machinist precision Tool w/ Case Made in Germany

Craftsman 40254 Vernier Caliper Machinist precision Tool w/ Case Made in Germany

  • Albany, New York, United States
  • Mar 11th
MAGNAFLUX Y-6 ELECTROMAGNETIC YOKE TEST EQUIPMENT PARTICLE INSPECTION

MAGNAFLUX Y-6 ELECTROMAGNETIC YOKE TEST EQUIPMENT PARTICLE INSPECTION

  • Collierville, Tennessee, United States
  • Mar 11th
Precision Level

Precision Level

  • Baltimore, Maryland, United States
  • Mar 11th
Master Precision Level

Master Precision Level

  • Baltimore, Maryland, United States
  • Mar 11th
++ K&E AUTOCOLLIMATING ALIGNMENT LASER CASE ONLY- - 21.5x8x8" - (BX1)

++ K&E AUTOCOLLIMATING ALIGNMENT LASER CASE ONLY- - 21.5x8x8" - (BX1)

  • Bosque Farms, New Mexico, United States
  • Mar 11th

People who viewed this item also vieved

Starrett Firm Joint Calipers vintage 6" # 243 Original Box

Starrett Firm Joint Calipers vintage 6" # 243 Original Box

  • Albert Lea, Minnesota, United States
  • Jan 30th
6 in. Digital Caliper with SAE and Metric Fractional Readings **NEW**

6 in. Digital Caliper with SAE and Metric Fractional Readings **NEW**

  • El Paso, Texas, United States
  • Jan 30th
Blake Co Axial indicator for repair

Blake Co Axial indicator for repair

  • Grants Pass, Oregon, United States
  • Jan 30th
Mitutoyo 2416-10 Dial Indicator Made in Japan

Mitutoyo 2416-10 Dial Indicator Made in Japan

  • Fort Lauderdale, Florida, United States
  • Jan 30th
used lot GO NO GO GAGE plug guage 807,827,805,815,768,773,770,790,7910,779 BO8-8

used lot GO NO GO GAGE plug guage 807,827,805,815,768,773,770,790,7910,779 BO8-8

  • Beltsville, Maryland, United States
  • Jan 30th
one ea. 1/2" x 12" feeler stock 0.004" Range Starrett #667-4 ~ (Off4B)

one ea. 1/2" x 12" feeler stock 0.004" Range Starrett #667-4 ~ (Off4B)

  • Saint Louis, Missouri, United States
  • Jan 30th
STARRETT INSIDE MICROMETER #823 ME ..100MM- 1000MM...TUBULAR.

STARRETT INSIDE MICROMETER #823 ME ..100MM- 1000MM...TUBULAR.

  • Beaverton, Oregon, United States
  • Jan 30th
STARRETT 1-2" OUTSIDE MICROMETER 436RL-2" New

STARRETT 1-2" OUTSIDE MICROMETER 436RL-2" New

  • Ashland, Ohio, United States
  • Jan 30th
OPTICAL COMPARATOR TAILSTOCK SET MACHINIST JIG FIXTURE CENTERS LOT A

OPTICAL COMPARATOR TAILSTOCK SET MACHINIST JIG FIXTURE CENTERS LOT A

  • Waterford, Michigan, United States
  • Feb 21st
comparators/microscope

comparators/microscope

  • South El Monte, California, United States
  • Feb 21st
Starret 6 Inch Steel Rule satin chrome finish with 3Grad.

Starret 6 Inch Steel Rule satin chrome finish with 3Grad.

  • Mount Dora, Florida, United States
  • Mar 1st
Vintage Starrett No.320 Machinist Ruler With Case Rare

Vintage Starrett No.320 Machinist Ruler With Case Rare

  • Saylorsburg, Pennsylvania, United States
  • Mar 1st
Vintage Lufkin 6" Combination machinist's Square rule level No. 2504

Vintage Lufkin 6" Combination machinist's Square rule level No. 2504

  • Grand Terrace, California, United States
  • Mar 11th
MACHINIST LATHE MILL Machinist Brown & Sharpe Steel Beveled Square Gage Gauge

MACHINIST LATHE MILL Machinist Brown & Sharpe Steel Beveled Square Gage Gauge

  • Morris Plains, New Jersey, United States
  • Mar 11th
Pick from four mini-magnetic stands. Machinist Tool Inspection

Pick from four mini-magnetic stands. Machinist Tool Inspection

  • Arlington, Texas, United States
  • Jun 4th
B & S Magnetic base Machinist Tool Inspection

B & S Magnetic base Machinist Tool Inspection

  • Arlington, Texas, United States
  • Jun 4th
Vintage Cast Iron Surface Place - USA Made-

Vintage Cast Iron Surface Place - USA Made-

  • Troy, Michigan, United States
  • Jun 29th
BLACK GRANITE 6" X 4" X 3" RISER BLOCK for use on Surface Plate - CELCO BLOCK #2

BLACK GRANITE 6" X 4" X 3" RISER BLOCK for use on Surface Plate - CELCO BLOCK #2

  • Mahwah, New Jersey, United States
  • May 24th
VINTAGE STARRETT NO. 12 BEVEL PROTRACTOR HEAD 0 - 180 DEGREES

VINTAGE STARRETT NO. 12 BEVEL PROTRACTOR HEAD 0 - 180 DEGREES

  • Bothell, Washington, United States
  • May 24th
MACHINIST ASSEMBLED BEVEL PTOTRACTOR & CENTER HEAD W/ 12" AND 24" 4 GRAD. RULES

MACHINIST ASSEMBLED BEVEL PTOTRACTOR & CENTER HEAD W/ 12" AND 24" 4 GRAD. RULES

  • Royalston, Massachusetts, United States
  • May 24th
DoALL precision gauges (partial set)

DoALL precision gauges (partial set)

  • Hopatcong, New Jersey, United States
  • May 26th
Lot of Deltronic Pin plug Machinist Gages NICE

Lot of Deltronic Pin plug Machinist Gages NICE

  • East Hanover, New Jersey, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies