+ Post new Ad
Federal Pocket Surf 111 VGC, US $280 – Picture 0
Federal Pocket Surf 111 VGC, US $280 – Picture 0

Federal Pocket Surf 111 Vgc

US $280

  • Warren, Michigan, United States
  • May 29th
Open on mobile:
QR code
MAHR FEDERAL POCKET SURF III SURFACE ROUGHNESS ANALYZER over :$2000  From the Factory Perfect  unit works Great No Master or Case Works great Description: *Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory. *Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging. *Can be used to measure any one of four, switch-selectable, parameters: Ra , Rmax/Ry , Rz. *Selectable traverse length 1, 3 or 5 cut-offs of 0.8 mm/ .030 in *Operates in any position – horizontal, vertical, and upside down *Four switch able probe positions – axial (folded) or at 90°, 180° or 270° *Even difficult-to-reach surfaces such as inside and outside diameters are accessible *Integrated data output for SPC-processing units that is compatible with the most common data processing systems. *Easy-to-read LCD readout presents the measured roughness value, in micro inches or micrometers, within half a second after the surface is traversed. Out-of-range (high or low) and “battery low“ signals are also displayed As you can see with my  feedback im a real 100% straight up seller

Directions

Similar products from Other Measuring & Monitoring Tools

THE L.S. STARRETT CO Dial Indicator Gauge No. 25-B 0-25-0 1"/1000 No Glass Parts

THE L.S. STARRETT CO Dial Indicator Gauge No. 25-B 0-25-0 1"/1000 No Glass Parts

  • Cuyahoga Falls, Ohio, United States
  • May 29th
D Impact Device/Probe for Leeb Hardness Tester,Meter

D Impact Device/Probe for Leeb Hardness Tester,Meter

  • Saddle River, New Jersey, United States
  • May 29th
Vermont Gage B Series Plug Gage Set .061-.250

Vermont Gage B Series Plug Gage Set .061-.250

  • Coventry, Rhode Island, United States
  • May 29th
THREAD GAUGE 52 BLADE SET SAE & METRIC

THREAD GAUGE 52 BLADE SET SAE & METRIC

  • Bowmanville, Ontario, Canada
  • May 29th
Comet 63S Lid Gauge solid steel construction

Comet 63S Lid Gauge solid steel construction

  • Niagara Falls, New York, United States
  • May 29th
Vintage E.W. Pike Flash-O-Lens Magnifier Flashlight USA Model: 7X Battery

Vintage E.W. Pike Flash-O-Lens Magnifier Flashlight USA Model: 7X Battery

  • Shell Knob, Missouri, United States
  • May 29th
Machinist tool lot

Machinist tool lot

  • Sandy, Utah, United States
  • May 29th
NOS AMERICAN SUN USA 200-4 18" Overall BENCH CENTER with Indicator Stand #WL30.4

NOS AMERICAN SUN USA 200-4 18" Overall BENCH CENTER with Indicator Stand #WL30.4

  • Perth, Ontario, Canada
  • May 29th
GITS GAUGE LIQUID LEVEL SIGHT GLASS 730-1 #04204

GITS GAUGE LIQUID LEVEL SIGHT GLASS 730-1 #04204

  • Brook Park, Ohio, United States
  • May 29th
Alvin Comb Bow Compass Double Break Leg No.805 W Germany

Alvin Comb Bow Compass Double Break Leg No.805 W Germany

  • Schererville, Indiana, United States
  • May 29th
Cam Micrometer .0001" LOTS - NICE !! TAKE A LOOK !!!!!

Cam Micrometer .0001" LOTS - NICE !! TAKE A LOOK !!!!!

  • Bloomfield, Connecticut, United States
  • May 29th
Centurion NDT HT-100 Eddy Current Hole Scanner Magnaflux 214430

Centurion NDT HT-100 Eddy Current Hole Scanner Magnaflux 214430

  • Fountain Hills, Arizona, United States
  • May 29th
Detroit Testing Machine Co. TCT Twist/Tortion Tester, Ser# 406S

Detroit Testing Machine Co. TCT Twist/Tortion Tester, Ser# 406S

  • Cobbs Creek, Virginia, United States
  • May 29th
STARRETT 15" MASTER PRECISION LEVEL STK 4842

STARRETT 15" MASTER PRECISION LEVEL STK 4842

  • Wadley, Alabama, United States
  • May 29th
OPTO-METRIC TOOLS INC. IN CASE Transformer included, base w level Telescope

OPTO-METRIC TOOLS INC. IN CASE Transformer included, base w level Telescope

  • Petaluma, California, United States
  • May 29th
4 inch Mitutoyo dro scale x y z mill lathe

4 inch Mitutoyo dro scale x y z mill lathe

  • El Monte, California, United States
  • May 29th
STARRETT 15" PRECISION MASTER LEVEL STK 5430

STARRETT 15" PRECISION MASTER LEVEL STK 5430

  • Wadley, Alabama, United States
  • May 29th
NEW Starrett Remote Display 768 120 VAC

NEW Starrett Remote Display 768 120 VAC

  • Fort Wayne, Indiana, United States
  • May 28th
(1) MITUTOYO Absolute Multi-Function Digimatic Length Gauge - Used - AM13569

(1) MITUTOYO Absolute Multi-Function Digimatic Length Gauge - Used - AM13569

  • Cleveland, Ohio, United States
  • May 28th
WESTWARD Pocket Scriber, Straight Point Type, LOT of 4

WESTWARD Pocket Scriber, Straight Point Type, LOT of 4

  • Lithonia, Georgia, United States
  • May 28th

People who viewed this item also vieved

MITUTOYO 0-6" Dial Caliper Inside Outside Step 0.001" 505-654-50 w/Case

MITUTOYO 0-6" Dial Caliper Inside Outside Step 0.001" 505-654-50 w/Case

  • Grand Prairie, Texas, United States
  • Jan 30th
FOWLER 8" Digital Caliper with SPC Port. Inch/MM Reading, ~NEW With Plastic Case

FOWLER 8" Digital Caliper with SPC Port. Inch/MM Reading, ~NEW With Plastic Case

  • Round Lake, Illinois, United States
  • Jan 30th
1 Lot Of Renishaw Probes & Radio Probe Interface Receivers

1 Lot Of Renishaw Probes & Radio Probe Interface Receivers

  • Derby, Kansas, United States
  • Jan 30th
Hexagon Sheffield Rebuilt RCU 4 CMM Renishaw Tesa Probe with 6 Month Warranty

Hexagon Sheffield Rebuilt RCU 4 CMM Renishaw Tesa Probe with 6 Month Warranty

  • Minneapolis, Minnesota, United States
  • Jan 30th
dial indicator gauge

dial indicator gauge

  • Hopatcong, New Jersey, United States
  • Jan 30th
CO-AX Indicator

CO-AX Indicator

  • Jeannette, Pennsylvania, United States
  • Jan 30th
MITUTOYO 192-152 0-24in DIAL HEIGHT GAGE MINT.

MITUTOYO 192-152 0-24in DIAL HEIGHT GAGE MINT.

  • United States
  • Jan 30th
2"-12.4" INTERAPID BORE GAGE .0001" CARBIDE TIPPED SWISS MADE MACHINIST TOOL

2"-12.4" INTERAPID BORE GAGE .0001" CARBIDE TIPPED SWISS MADE MACHINIST TOOL

  • Warren, Michigan, United States
  • Jan 30th
Mitutoyo Metric Outside Micrometer With Standards 0-150mm 104-135 MORE PHOTOS

Mitutoyo Metric Outside Micrometer With Standards 0-150mm 104-135 MORE PHOTOS

  • Evansville, Indiana, United States
  • Jan 30th
Mitutoyo 193-211 Digit Outside Micrometer, Lightly Used, w Case, Complete

Mitutoyo 193-211 Digit Outside Micrometer, Lightly Used, w Case, Complete

  • Charlotte, North Carolina, United States
  • Jan 30th
Starrett No.62 Rule Holder NIB

Starrett No.62 Rule Holder NIB

  • Baltimore, Maryland, United States
  • Feb 16th
Fisher Satin Chrome Rule English & Metric Markings 12"/300Mm Measuring Tools DIY

Fisher Satin Chrome Rule English & Metric Markings 12"/300Mm Measuring Tools DIY

  • London, United Kingdom
  • Feb 16th
MACHINIST TOOLS LATHE MILL Machinist Steel Beveled Square MICRO for Sherline

MACHINIST TOOLS LATHE MILL Machinist Steel Beveled Square MICRO for Sherline

  • Morris Plains, New Jersey, United States
  • Mar 3rd
81-B Steel Gage Block Set 81 Piece Rectangular Shape 0.050"-4.000

81-B Steel Gage Block Set 81 Piece Rectangular Shape 0.050"-4.000

  • Madison Heights, Michigan, United States
  • Mar 3rd
L.S. Starrett Indicator #25-441 w/ Quick lock Holder

L.S. Starrett Indicator #25-441 w/ Quick lock Holder

  • Grants Pass, Oregon, United States
  • Mar 25th
NOGA, MA61003, Indicator Positioner & Holder, Magnetic Base, 286 Lbs Pull,/HV3/

NOGA, MA61003, Indicator Positioner & Holder, Magnetic Base, 286 Lbs Pull,/HV3/

  • Saint Louis, Missouri, United States
  • Mar 25th
Japanese SHINWA Protractor Rapporteur Stainless steel Winkelmesser 62987

Japanese SHINWA Protractor Rapporteur Stainless steel Winkelmesser 62987

  • Japan, Japan
  • May 5th
STARRETT C183 Steel Protractor, Rectangular, 6 In

STARRETT C183 Steel Protractor, Rectangular, 6 In

  • Petaluma, California, United States
  • May 6th
Lot of Plug Gages

Lot of Plug Gages

  • Aurora, Indiana, United States
  • May 24th
Granite surface plate only

Granite surface plate only

  • Marathon, New York, United States
  • May 25th
Steel Gauge~Gage Block Set~Marked Poland 81 pc, but some are missing~With BOX

Steel Gauge~Gage Block Set~Marked Poland 81 pc, but some are missing~With BOX

  • Monroeville, Ohio, United States
  • May 28th
W.F. FRASER 30 DEGREE ANGLE BLOCKS

W.F. FRASER 30 DEGREE ANGLE BLOCKS

  • Baldwinville, Massachusetts, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies