Filabot Fov1 Original Filament Extruder Green Supplies 3d Printer Recycles

US $4700

Ramseur, North Carolina, United States
May 26th

Open on mobile:
QR code

This was used as a demo a few times. We pulled from box and all original included components are present as well as sample bag of pellets. We tested for power up and all looks good. Machine shows only mild signs of use. We will package carefully for shipment. Specs below. Factored shipping is for Cont US only! THANKS Convert plastic pellets and shavings into 1.75-mm or 3-mm diameter filament for use with fused-filament-fabricator 3D printers Create custom filament materials, colors, and lengths Digital temperature panel ensures even, controlled heating during extrusion Integrated filter removes contaminants from the melted material during extrusion Compatible with ABS, HIPS, and PLA pellets and shavings, as well as colorants and additives The Filabot Original filament extruder converts plastic pellets and shavings into 1.75-mm or 3-mm diameter filament for use with fused-filament-fabricator 3D printers. The extruder accepts new or recycled acrylonitrile butadiene styrene (ABS), high impact polystyrene (HIPS), or polylactic acid (PLA) pellets and shavings as well as colorants and additives such as fiber, wood, and conductive materials to create custom filament materials and colors. The extrusion temperature can be set from 40 to 400 degrees C (104 to 752 degrees F) using the digital temperature panel to ensure even, controlled heating during extrusion, and the integrated filter removes contaminants from the melted plastic as it is extruded. Specifications Compatible materials ABS, HIPS, and PLA pellets and shavings, as well as additives and colorants Extruding temperature 40 to 400 degrees C (104 to 752 degrees F) Extrude rate 10 to 30 inches per minute Feed Screw Speed 35 RPM Filament output 1.75mm, 3 mm Power requirement 115V or 220V Power draw About 300 W Overall dimensions 17 x 7 x 8 inches (H x W x D) *H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Filabot manufactures recycled material filament and filament-making machines for 3D printers. The company, founded in 2012, is headquartered in Milton, VT. What's in the Box? Filabot Original filament extruder 1.75-mm nozzle 3-mm nozzle