fire hose 2 for sale, brand-new and used.

This #DMH1515F Brass Hex Nipple or Hose Adapter is brand new out of package. It is 1-1/2" Male NPT x 1-1/2" MNST (NH) Made of solid brass. Often used on fire equipment or hoses to adapt from conventional pipe thread to National Standard Thread.

var itemNumber = window.ebayItemID ?

This auction is for a vintage original Fire Hose Brass Gated Wye, made by the ELKHART BRASS MFG. CO. The wye's openings are 2 1/2"x NH x 2 - 1 1/2" NH.

100' long 1 1/2" firehose with brass couplings. Single jacketed. All from decommissioned commercial building fire fighting systems.

75' long 1 1/2" firehose with brass couplings. Single jacketed. All from decommissioned commercial building fire fighting systems.

Up for bid is a brand new 1-1/2"Inch x 50'ft single jacket lightweight polyester compact hose. This fire hose is for interior protection, construction and for all of your protection needs. This 1-1/2" hose has a working pressure of 250 psi and is tested for a rating of 500 psi.

100 Pound Wheeled Carbon Dioxide Extinguisher UL Rating: 20B / C Amerex 334

UL LISTED AND MADE IN THE USA. TWO BRONZE CONNECTORS AND ONE BRONZE SPRAY NOZZLE. NOZZLE READS NOT FOR ELECTRICAL FIRS - A7-81 - UL LISTED 6747X - PORTABLE SPRAY TYPE NOZZLE NS 100G.

THE TOOL STORE 490 JERICHO TPKE, MINEOLA NY-USA (516)747-0651 HOSE MONSTER 2 1/2" with BUILT IN PITOT HYDRO FLOW PRODUCTS CONDITION MINT DESCRIPTION 2 1/2" Hose Monster with Built-In Pitot The 2 1/2 " Hose Monster cancels the thrust of high-velocity water flow and is FM Approved for flow-rate accuracy. It includes a built-in, reversible pitot and measures flows from 533–1460 GPM. For lower flow-rates, a Nozzle Insert can be used.

This is a "vintage looking" but not vintage 35' fire hose, 2'5" diameter. It has cast (aluminum?) connectors, with maker and id markings. The female end has the swivel collar and is marked "Action NH Made in USA" and the male end is marked "2.5" NH-S"; there is some barely discernible printing on the fabric covering, and the fabric is frayed in some spots.

The ultimate hard wearing, hard performer, our Rubber Covered Fire Hose is the choice of professionals nationwide. That's because its abrasion-resistant, heat-free nitrite synthetic one-piece cover and liner is impervious to water,oil,gas and most chemicals. It has a proof test pressure of 500psi and a service test of 250 psi.

• This is double clappered fire hose wye valve made by Elkhart. • Equipped with a drain valve. • Two 2.5” NH/NST female swivel connectors to a 2.5 male NH/NST connection.

• This is a double gated fire hose wye valve made by Akron Brass • Made of lightweight anodized aluminum material for corrosion resistance. • Made to U.S. government FSS (Forest Service Standards) • Input side is a swivel 1.5" female rocker lug NH/NST thread • Output is to two 1.5" male NH/NST thread discharges.

Tigair reciprocating air saw Used But In Great Condition. Works Great Belonged to the city of San Diego I Bought at Auction from the city so there is City of San Diego numbers on it. (see pictures ) Includes: -Saw -Case -8 fl.

var itemNumber = window.ebayItemID ?

This fire hose nozzle is made with a thermoplastic polycarbonate material and has a brass stem. Nozzle comes equipped with female 2” NST (National Standard Thread). Nozzle adjusts from closed to fog to stream.

• This is little solid brass fire hose wye valve • Input side is a swivel 1-inch NH/NST thread • Works with a pin style spanner for small fittings (does not have lugs or rockers - see photos) • Output is to two 1" male NH/NST thread discharges. • This is used when you want to divide one hose line into two. • This unit is old but in good condition (the swivel connection moves freely) • Weight is 2.5 lbs.