Fisher Controls 64r-23 1/2 ” Pressure Reducing Regulator 5-35 Psi, 250 Psi Inlet

US $165.00

Walled Lake, Michigan, United States
Mar 27th

Open on mobile:
QR code

Fisher Controls 64R-23 1/2 ” Pressure Reducing Regulator 5-35 PSI, 250 PSI Inlet You are bidding on a Fisher Controls 64R-23 1/2 ” Pressure Reducing Regulator 5-35 PSI, 250 PSI Inlet. http://www.controlsouthern.com/documents/regulators/Literature/Bulletins/D100113X012.pdf FACTORY LINK The 64 Series regulators were spring-loaded, direct-operated devices typically used to delivery constant reduced pressure of gaseous fluids to pilot-operated controllers and other pneumatic instrumentation. Fisher 64 Series High-Pressure Regulators-LP-Gas FACTORY LINK 64 Series High-Pressure Regulators Body Content 1 64 Series adjustable high-pressure regulators offer a wide range of available pressure ranges. High-pressure regulators usually reduce tank pressure to an intermediate pressure for use by another regulator. They may be used as high-pressure regulators on distribution systems when used in conjunction with first-stage downstream regulators. When equipped with an internal relief valve (64SR Series), the regulator may be used as a final-stage regulator on high-pressure systems. It may also be used as a first-stage regulator when set at 10 psig / 0,69 bar or less. 64KB Series has a special Polytetrafluoroethylene (PTFE) diaphragm protector that makes it suitable for anhydrous ammonia (NH3) service. The 1/4-inch FNPT tapped and plugged side outlet can be used to install a pressure gauge or a hydrostatic relief valve. Fisher Controls 64R-23 / *V2 64 Series Pressure Reducing Regulator BNIB / NOS rm - REGULATORS - Parts $200.00 LINK Fisher 64R - 23 / 64 Series Pressure Reducing Regulator BNIB / NOS The 64 Series regulators are spring-loaded, direct operated devices typically used to deliver constant reduced pressure of gaseous fluids to meet the flow demands of downstream equipment. These regulators have a body side outlet that is drilled and tapped. This outlet may be plugged or used as a gauge connection Type 64R- Internal relief version of the Type 64 regulator. The Type 64R has an integral low-capacity relief valves. The valve stem seats against a drilled hole in the diaphragm plate. If the reduced pressure should exceed the set pressure, the diaphragm will automatically be lifted off the valve stem so that a limited amount of excess pressure can flow into the spring case and bleed out through a screened vent. Speciifications: · Spring Range: Actual 0-35 PSIG / Recommended 5-35 PSI · Inlet & Outlet: 1/2- inch NPT · Side Outlet: 1/4 inch NPT · Maximum Inlet Pressure (Body Rating): 250 psig (17,3 bar) · Maximum Emergency Outlet Pressure 200 psig (13,8 bar) · Outlet Pressure Adjustment: May be adjusted by turning adjusting set screw · Material Temperature Capabilities: -20 to 150 degrees Farenheit · Weight: 2.25lbs Return Policy: Within 14 days after receiving this item and if you believe that we mis- represented it, please email us to set up a return shipment. All freight and handling charges are the responsibilities of the buyer, in both directions. The item must be returned in the same condition that it was shipped. Thank You SHIPPING: This item has a combined shipping weight of 3 pounds and will be shipped FedEx or USPS. Check with us for shipping options and rates. We combine shipping on multiple orders. There is no charge for pick up at our Northwest Detroit Suburb location. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. Make an appointment. Robert at spectorequipment.com 248-752-5084 We accept most forms of payment including: Credit Cards, Pay-Pal, personal, company and cashier’s checks, pay on pick up. All funds must clear our bank before delivery. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Fisher
MPN	64R-23
Model	1/2 ” 5-35 PSI, 250 PSI Inlet Regulator
Country/Region of Manufacture	United States