Fleetwood Standard Reply Crs910 Voting Response System W/(10) Wireless Keypads

US $840

  • San Diego, California, United States
  • Jun 6th
Fleetwood Standard Reply CRS910 Voting Response System w/(10) wireless keypads We gladly ship worldwide*! Fleetwood Standard Reply CRS910 Cordless Voting Response System w/(10) CRS-1200 wireless keypads Auction Includes Fleetwood reply CRS910 base station, 10 keypads, power cord. The hardware based Fleetwood audience response system is a peripheral device that attaches to a standard computer, desktop, tower, or notebook. It consists of an Interface (also called a base station or controller) and some number of keypads. The interface communicates with each keypad via a wireless radio link, and with your computer via a standard serial cable. The CRS910 base station uses 3 whip antennas. Mount the long antenna on the center post and the two shorter antennas on the outside posts. If your computer does not have a built in serial port, you will need to obtain one. Many USB to serial adapters simply do not work. We have found that the Startech ICUSB232 works well with about 95% of the machines we've tested. The other choice is a PCMCIA card. Of these, we have found the Quatech brand to be the most reliable. The Interface communicates with up to 250 keypads on a specific radio frequency (channel) and sends data to one of the computer's serial communications ports for processing. There are eight different radio channels available within the Fleetwood Standard Reply hardware platform, for a maximum system capacity of 2000 keypads . A channel 1 interface communicates only with channel 1 keypads. The same holds true for all other channels. The Audience Response Keypads The response keypads function as individual terminals, sending user entered digits to the Interface via wireless Radio Frequency transmission. Each pad has an electronically stored "address," or ID, which is also written on its bottom cover. This address is a number from 1 to 250. Please see our Frequently Asked Questions page for information on re-addressing keypads and for re-assigning channels on synthesized keypads. In general, it is critical that keypads are placed within the maximum radio range (about 75') of the interface's receiving antennas. In large rooms seating hundreds of people, this is typically accomplished by using an external antenna system that includes high gain, dipole antennas. CRS1200  keypad Summary The Fleetwood Reply Model CRS1200 Response Keypad is a lightweight cordless handheld response keypad that provides data interactivity in a variety of presentation and learning environments. The Reply system uses radio frequency technology in the keypad to transform the group experience from a one-way information flow to a dynamic two-way information flow that has been proven to provide higher attention and retention rates. The Model CRS1200 Keypad allows users to participate in the interactive process by responding to multiple choice questions and viewing the results of the group response on a monitor or projection screen. The collected data identifies the understanding of the group and, as appropriate, its teams and individual users. In addition to the visual display, the system tabulates, sorts, and stores responses for post-session analysis and printing. CRS1200 keypad Specifications Enclosure    Each wireless keypad is housed in a lightweight, compact, gray A.B.S. plastic molded enclosure.    Dimensions: 6.7" L X 3.1" W X 1.5" H.    Weight: 6.5 ounces. User Input    Soft-touch sealed membrane switch panel with 12 tactile keys.    Ten keys are numbered 1-10. Additional key markings include A-E on keys 1-5, and "Yes" and "No" on keys 1-2. "Clear" and user-defined "asterisk" keys provide additional functions.    Optional: Membranes can be customized to "personalize" the product. These custom membranes may be substituted for standard membranes. Minimum order and special terms apply. Display    Seven-segment LED is highly visible, even in reduced lighting conditions.    Provides response entry confirmation and positive acknowledgment that the Base Station received the response input. Power and Power Management    Powered by a commonly available 9-volt alkaline battery and internally regulated to 5 volts for consistent performance throughout the life of the battery.    Keypad is using power only when transmitting and acknowledging an entered response. Low battery is indicated by the rapidly flashing seven-segment LED display when about 100 responses are remaining.    Battery provides sufficient power for 10,000 response interrogations before requiring replacement. User Identification    Each keypad has a unique address between 1 and 250 and a radio frequency (RF) channel number. Combining this "address" feature with a unique response verification routine provides security.    Keypads operate independently of each other, and keypad addresses are programmable. RF Technology    Proprietary two-way radio communication system provides reliable, barrier-free operation between keypads and their associated Base Station.    Response entries are acknowledged when received by the Base Station.    Integrated error checking ensures accurate communication of responses and control functions.    The keypad design uses separate frequencies for controlling the keypad and communicating key presses to the Base Station.        A 216 MHz RF keypad receiver processes address/control signals from the Base Station's transmitter. This receiver is dual conversion crystal referenced frequency modulated.        A 345 MHz RF keypad transmitter sends keypress information to the Base Station's receiver. This transmitter is frequency modulated.    Eight (8) radio channels are available to provide flexibility.    Internal loop antenna is enclosed and protected by the keypad housing. Range    The system is designed to provide reliable operation in an area 100 feet by 100 feet with standard omnidirectional, quarter-wave whip antennas.    Greater range is achieved by using the optional auditorium antenna kit. This kit includes high-gain dipole antennas that replace the standard antennas. Speed    The Base Station scans each keypad in sequence. Scan duration is 1/100th of a second. Within each brief time slice, the Base Station is able to simultaneously determine a keypad's identification and process its response information.    This "look, listen, verify" routine is both intelligent and fast. Polling cycles are adjustable to optimize speed to group size. For example, a group of 50 keypads can be sampled every one-half second, whereas an audience of 2,000 per room/site can be sampled every 3 seconds.    When used with Replydistance learning software, responses from multiple sites may be combined and processed with no additional delay. Control    Utilizes a high performance microprocessor and external permanent memory for storage of setup parameters and keypad addresses.    Firmware is installed in microchips, which can be replaced to facilitate easy upgrade during the life of the product. Capacity    250 keypads per radio channel.    8 radio channels are available to support a maximum of 2,000 keypads per room/site.    Adding keypads to an existing Base Station requires them to be set to new, unused addresses. No change is required on the Base Station when keypads of the same radio channel are added. System Configuration A basic Reply system consists of...    10 CRS 1200 Wireless Keypads    one CRS 910 Base Station for every 250 keypads of the same radio channel in a room, Optional accessories (purchased separately) include dipole antennas, multisite application software, serial cable extension kits, radio analyzer toolkit, base station carrycases, and keypad carrycases. Item powers up. Don't forget to place your bid. By bidding on this auction you agree to the following  terms: Shipping Terms: Buyer pays all shipping costs. Let us know if there is an issue with the shipping costs, as they are automatically calculated by ebay. Shipments made to California must include 8.0% sales tax unless we are provided with a valid resale certificate. We reserve the right to ship with Fedex ground, USPS and any other carrier in the best interests of the buyer and seller. The Parcel post option is only available to alaska, Hawaii, and US territories only. If you select parcel post and you live in the lower 48 states you package may be sent by another carrier and/or an additional shipping amount may be required. Payment Terms: Payment is to be made by PayPal in U.S. funds. Please contact us if you have any questions about ebay's recent payment policy change. Payment is to be received within ten days of close of auction. Should payment not be received within ten days the item will be re-listed and high bidder will forfeit. No personal checks will be accepted. International Terms: (These terms only apply to international shipments.) Buyer is responsible for all brokerage, customs, and or duty charges. *Not all items are available for international shipment due to import/export regulations. In the event that we are unable to ship to buyers country, buyer will receive a full refund. Payment must be made in US Dollars. Money must be drawn against a US bank. Warranty Terms: No warranty nor guarantee is expressed or implied regarding: usability, functionality, merchantability, or cosmetic appearance of the item(s) in auction. What you see in the picture(s) is what you get nothing more nothing less. Test results of item(s) in auction are described to the best of our ability in the ad. The results of all tests that are performed are disclosed in the ad. Items sold as "Untested" are simply that we have been unable to test the item(s) due to missing cables/adapters/toner cartridge/ksu/etc, lack of time, or other restrictions, Such as when we sell a laptop that we don't have an AC adapter for. Our only guarantee is that you will receive the make and model listed in the ad. The maximum liability of BetterBizequipment(the seller) is the high bid of the auction. Return Terms: Returns are only allowed under cases of gross misrepresentation in the ad, such as when we describe a monitor as a fax machine. Such claims of misrepresentation must be filed within three days of receipt of shipment. Betterbizequipment reserves the right to replace the item(s) or refund the high bid solely at our discretion. Item must be returned in the original box and packaging. Bidder must request a RMA number before returning item(s). Packages returned without a RMA number will become property of Bbetterbizequipment ten days after receipt unless buyer has paid return shipping within the ten day period. Shipping Damage Terms: Seller will file a shipping claim(s) upon behalf of the buyer with common carrier in the event shipment(s) is/are damaged during shipping, in most cases. Not retaining the original box and packaging may affect the carriers decision on a claim. Seller will commence filing the claim once buyer has filed the damage report with the seller. Buyer must notify seller within 48 hours of receipt of a damaged shipment. Medical Terms: The following terms apply to any and all medical items or any item offered for sale in any medical category or any item that eBay deems these terms are applicable to: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. The buyer will not hold the seller, eBay or the item's manufacturer responsible for the appropriate or inappropriate use of this device either by the user or a third party. Once purchased, it is the sole responsibility of the purchaser to assume any and all liability from the use of this device. Please note before bidding that any medical equipment purchased should be completely tested by a qualified biomedical technician prior to being put into service. Jason Rydell in San Diego, CA, USA Phone: 619-519-0869 Online Business name: Betterbizequipment If any provision of this Auction Contract is held unenforceable, All remaining provisions of this Contract shall remain in full force and effect. Copyright 2011 Betterbizequipment - All Rights Reserved. Auction Wizard 2000 - The Complete Auction Management Software Solution

Directions

Similar products from Other Presentation Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies