Flex Seal Liquid Large 16oz X2 ( Black) Brush Roll Dip Pour! Black

US $160

Yuma, Arizona, United States
Nov 12th

Open on mobile:
QR code

Flex Seal Liquid Large 16oz x2 (Black) Brush, Roll, Dip, Pour! Product Details Color: black Brand: Flex Seal Part Number: LFSBLKD16 Item Weight: 1.4 pounds Product Dimensions: 4 x 3.2 x 3.2 inches Color: black Batteries Included?: No Batteries Required?: No Shipping Weight: 1.4 pounds Date First Available: December 22, 2015 Flex Seal Liquid starts out as a thick liquid & dries to a flexible, watertight rubberized coating Blocks out air, water and moisture on a variety of surfaces and objects Non-Toxic and Nonflammable, No harmful vapors, UV, chemical and mildew resistant Protects surface from rain, snow, sun, wind, air, moisture, UV degradation, and extreme temperatures Creates a flexible rubber barrier that coats, seals, protects, and stops leaks fast! Color: black FLEX SEAL® LIQUID is a patent pending, proprietary formulation that starts out as a thick liquid and dries to a super strong, flexible, watertight rubberized coating. FLEX SEAL® LIQUID can be brushed, rolled, dipped or poured to create a high performance protective rubber barrier that blocks out air, water and moisture on a variety of surfaces and objects. Once cured, FLEX SEAL® LIQUID forms a durable, breathable, weatherproof, non slip barrier that's resistant to rain, snow, sun, wind, hail, air, moisture, UV degradation, extreme temperatures and natural weathering. DIRECTIONS: Stir can well, do not shake. Make sure the surface is clean, dry and free of grease, oil and dirt. For better adhesion, scuff surface with sand paper or steel wool. Coverage will vary depending on amounts of coats used. 1 Large 16oz - approx. 20Sq. Ft., 1 Jumbo 32oz - approx. 40Sq. Ft., 1 Gallon can - approx. 150Sq. Ft., Brush or roll FLEX SEAL® LIQUID using an even sweeping motion. Apply several even coats until the surface has been completely covered and ALL cracks and holes have been filled. Allow FLEX SEAL® LIQUID to dry 24 to 48 hours and apply additional coats as needed. Always brush or roll over a larger area than just where the leak occurred. Dip object directly into the FLEX SEAL® LIQUID make a slight swirling motion. Once the surface has been coated, remove and let any excess drip back into the can. Hang or clip the object in the same vertical position as it came out of the can and let dry. Pour FLEX SEAL® LIQUID directly on the surface allowing gravity to take FLEX SEAL® LIQUID into cracks, holes and hard to reach areas. Continue to pour until the surface has been covered and all cracks and holes have been completely filled.