+ Post new Ad
Flow International Waterjet Pump Model 50-IS 50 hp intensifier, US $11000 – Picture 0
Flow International Waterjet Pump Model 50-IS 50 hp intensifier, US $11000 – Picture 0

Flow International Waterjet Pump Model 50-is 50 Hp Intensifier

US $11000

  • Winfield, Iowa, United States
  • May 26th
Open on mobile:
QR code
Manufacturer: Flow International Model: 50IS Pressure Rating: 60 kpsi Horse Power: 50HP Serial #: 506-9233 Date of manufacture: 05-06 This pump is wired for 480v 3phase This unit was integrated into a Flow IFB waterjet machine. It was in good working order. Unit was only removed due to upgrading to a 100HP pump. We thoroughly went through this pump after removal and did a full service including rebuilding the LP hydraulic unit and the HP seals and check valves. Unit was drained and refilled with fresh hydraulic fluid and all filters were changed. This unit is designed to be integrated into a Flow system controller and was not designed as a stand alone unit. All shipping charges are the responsibility of the buyer. Local pick-up is available and loading will be free of charge. If buyer chooses to have this item shipped freight, there will be a $100.00 palletizing fee added to purchase price. PayPal is the only accepted form of payment.

Directions

Similar products from Other Manufacturing Equipment & Tools

Vertical Band Saw KNUTH VB300

Vertical Band Saw KNUTH VB300

  • Miami, Florida, United States
  • May 26th
HARDINGE 11" x 18" SUPER-PRECISION TOOLROOM LATHE W/ COLLET CLOSER - TFB-H

HARDINGE 11" x 18" SUPER-PRECISION TOOLROOM LATHE W/ COLLET CLOSER - TFB-H

  • Chino, California, United States
  • May 26th
HEINRICH MACHINE AIR PNEUMATIC VISE DA-6601 6" JAW SEE PICTURES

HEINRICH MACHINE AIR PNEUMATIC VISE DA-6601 6" JAW SEE PICTURES

  • Harrison Township, Michigan, United States
  • May 26th
Jet GH-1340W-3 Geared Head Engine Lathe w/ Newall DRO, Follow Rest. Bison Settru

Jet GH-1340W-3 Geared Head Engine Lathe w/ Newall DRO, Follow Rest. Bison Settru

  • Perry, Ohio, United States
  • May 26th
Nichols Hand Mill SN 10N-9241

Nichols Hand Mill SN 10N-9241

  • Racine, Wisconsin, United States
  • May 26th
Bliss OBI Punch Press Model 29M 150-Ton Capacity

Bliss OBI Punch Press Model 29M 150-Ton Capacity

  • Racine, Wisconsin, United States
  • May 26th
Haas Model HRT, Servo Rotary Table Operators Manual 160, 210, 310, 450 Original

Haas Model HRT, Servo Rotary Table Operators Manual 160, 210, 310, 450 Original

  • Daytona Beach, Florida, United States
  • May 26th
NVZ5340-5MOZ , SMC VALVE - BRAND NEW

NVZ5340-5MOZ , SMC VALVE - BRAND NEW

  • Daytona Beach, Florida, United States
  • May 26th
Miller Syncrowave 180SD Welder

Miller Syncrowave 180SD Welder

  • Elk Grove Village, Illinois, United States
  • May 26th
Miller Syncrowave 200 Welder

Miller Syncrowave 200 Welder

  • Elk Grove Village, Illinois, United States
  • May 26th
SET OF 5 GRAYMILLS CORPORATION GROUND WIRE CLAMPS PIPE ??????????????? NOT SURE

SET OF 5 GRAYMILLS CORPORATION GROUND WIRE CLAMPS PIPE ??????????????? NOT SURE

  • Lucas, Ohio, United States
  • May 26th
Geo-T-Schmidt nameplate marking machine dial 1/16

Geo-T-Schmidt nameplate marking machine dial 1/16

  • Fuquay Varina, North Carolina, United States
  • May 26th
Leveling foot, Bosch Rexroth M12 44x85 mm, galvanized steel, 3842352061

Leveling foot, Bosch Rexroth M12 44x85 mm, galvanized steel, 3842352061

  • Tucson, Arizona, United States
  • May 26th
Missler DEB420CEA 16" x 16" Band Saw - verry little usage (Beautiful)

Missler DEB420CEA 16" x 16" Band Saw - verry little usage (Beautiful)

  • Toledo, Ohio, United States
  • May 26th
Perkins / ETCO Electric Stamping Crimping Press

Perkins / ETCO Electric Stamping Crimping Press

  • Fort Wayne, Indiana, United States
  • May 26th
1997 Mazak VTC-16B, 7,000 RPM, 24 ATC, M-+32 Control

1997 Mazak VTC-16B, 7,000 RPM, 24 ATC, M-+32 Control

  • La Mesa, New Mexico, United States
  • May 26th
6 Lot-Steel Piano Hinge 5.25 x 1.25 Cabinet/Door/Project/Furniture/Craft

6 Lot-Steel Piano Hinge 5.25 x 1.25 Cabinet/Door/Project/Furniture/Craft

  • Hollis, New Hampshire, United States
  • May 26th
5-Plain Steel Piano Hinge 7.5 x 1.5 Cabinet/Door/Project/Furniture/Craft/Car

5-Plain Steel Piano Hinge 7.5 x 1.5 Cabinet/Door/Project/Furniture/Craft/Car

  • Hollis, New Hampshire, United States
  • May 26th
5 Pc Lot-Steel Piano Hinge 22.25 x 1.25 Cabinet/Door/Project/Furniture/Craft

5 Pc Lot-Steel Piano Hinge 22.25 x 1.25 Cabinet/Door/Project/Furniture/Craft

  • Hollis, New Hampshire, United States
  • May 26th
4 Pc Lot-Steel Piano Hinge 12.75 x 1.5 Door/Sheet Metal/Wood Working/Cabinet

4 Pc Lot-Steel Piano Hinge 12.75 x 1.5 Door/Sheet Metal/Wood Working/Cabinet

  • Hollis, New Hampshire, United States
  • May 26th

People who viewed this item also vieved

Devices for Grinding a Square and Hexahedron - metric system

Devices for Grinding a Square and Hexahedron - metric system

  • Brooklyn, New York, United States
  • Feb 23rd
BRASS ROUND STOCK 7.5L X 2 1/4

BRASS ROUND STOCK 7.5L X 2 1/4

  • La Center, Washington, United States
  • Feb 23rd
7" x 1" round lathe mill stock 4140 steel

7" x 1" round lathe mill stock 4140 steel

  • Cedar Rapids, Iowa, United States
  • Feb 23rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies