Fluid Components International 12-64B-A0B1 FCI flow switch 1264BA0B1 New 12-64, US $289.00 – Picture 0

Fluid Components International 12-64B-A0B1 FCI flow switch 1264BA0B1 New 12-64, US $289.00 – Picture 1

Fluid Components International 12-64B-A0B1 FCI flow switch 1264BA0B1 New 12-64, US $289.00 – Picture 2

Fluid Components International 12-64B-A0B1 FCI flow switch 1264BA0B1 New 12-64, US $289.00 – Picture 3

Fluid Components International 12-64b-a0b1 Fci Flow Switch 1264ba0b1 New 12-64

US $289.00

Menasha, Wisconsin, United States
Feb 14th

Open on mobile:
QR code

Fluid Components International FCI Model: 12-64B-A0B1 Flow Sensor with temperature compensation Power:115 VAC 50/60hz Relay: 2A Pressure: 3000PSIG at 350 degree F Serial # 340190 Manufacture: 04/2011 New product but comes without OEM packaging. This document explains the operating principle of the Model 12-64 Basic Flow Switch. The Model 12-64 Basic is an instrument that is capable of detecting liquid, gaseous or slurry environments. The operational part of the sensing element is the sensing point. The sensing point consists of 3 thermowells (hollowtubes). Two of the thermowells are welded together. One of the welded thermowells contains a heater and the other contains a Resistance Temperature Detector (RTD). The third thermowell contains a reference RTD for measuring the media temperature. There is a delta difference between the active and reference RTD resistances. When the sensing point is in a media that is not flowing (or dry), the media density across the thermowells is low, causing the active RTD to be at a higher temperature than the reference RTD. value. When the media starts to flow (or is wet) across the sensing point, the media density across the thermowellsincreases, conduction and convection cools the active RTD in proportion to the density of the fluid, and the Delta R decreases. FCI enclosure:NEMA 4X (approximately equal to IP66) Suitable for Hazardous locations... Explosion Proof. suitable for hazt The basic functions of the control circuit are to provide power to the sensing element, measure the Delta R between the two RTDs, condition the sensing point signals, and provide relay alarm contacts for customer uses. A double pole double throw (DPDT) relay is available in the instrument for connections to the customer alarm systems. The relay coil can be set for either energized or de-energixed when there is either flow (wet) or no flow (dry) of the process media. [The factory set condition is the coil being de-energized at no-flow (dry).] The place where the relay changes state will vary depending on the type of media as well as air or liquid turbulence. Therefore the instrument has a field adjustable alarm set point The unit is guaranteed for 60 days money back. If you need special delivery instructions, just contact us by email through the EBAY contact seller tab. L-Automation

“The flow sensor in new but does not come with an OEM packaging. The sensor was removed from a storeroom shelve when the facility closed.”