Fluke 1587 Insulation Multimeter Kit + Hard Shell Case + Fluke Deluxe Lead Set

US $550

Columbus, Indiana, United States
Nov 22nd

Open on mobile:
QR code

FLUKE 1587 Insulation and MultiMeter Kit with Fluke Hard Shell Case, Fluke Lead Set, and Stray Voltage Eliminator Kit. MINT CONDITION, lightly used but Flawless. This meter has only been used for demonstrations and has not been exposed to a shop environment. Pictures tell the tale, protective film is still on display and all functions work perfectly. Pictures show a few of the 1587 attributes, meggar test of 1000 volts, D.C. voltage reading, internal impedance, room temperature, and A.C. stray voltage in millivolts. I am original owner and will answer any question ASAP. Pictures are what is being sold and delivered. Guaranteed to be fully functional upon delivery. Product Description The Fluke 1587 digital insulation multimeter (also known as a multitester) is a true RMS, auto- and manual-ranging meter insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear. The insulation test voltages of 50, 100, 250, 500 and 1000V measure resistance from 0.01 megohms to 2 gigohms. The meter also measures capacitance, frequency, and resistance. Temperature is measured using a K-type thermocouple (included). A diode test detects correct functioning of a circuit's diodes. A low-pass filter provides accurate AC voltage and AC frequency measurements on inverters and variable-frequency motor drives by blocking unwanted voltages. Live circuit detection increases user safety by preventing insulation tests when voltages exceed 30 volts, and auto-discharge of capacitive voltage increases user protection. An audible continuity sensor confirms a circuit conducts electricity. The LCD is backlit for readability in low light. A Hold function freezes the reading on the display. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 20 minutes of nonuse to conserve battery life or can be disabled for extended readings, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter included a set of detachable test leads, a remote probe, alligator clips, a hard case, and instructions. Specifications • Insulation test voltages 50V, 100V, 250V, 500V, 1000V • Insulation measurement range 0.01 megaohms to 2 gigohms • Maximum AC and DC voltage measurement 1000V • Maximum AC and DC current measured 60 milliamp • Resistance 0.1 ohms to 50 megaohms • Maximum frequency 99.99kHz • Temperature probe and range K-type thermocouple -40 to +537 degrees C/-40 to +998 degrees F • Maximum capacitance 9999 microfarads • Power supply 4 AA batteries (NEDA 15A or IEC LR6) • Safety ratings Ingress Protection (IP)-40; European Conformity (CE); Underwriter's Laboratory (UL) 61010-1; ANSI/ISA S82.01-2004; Canadian Standards Association (CAN/CSA) C22.2 No. 1010.1:2004; International Electrotechnical Commission (IEC) safety standards IEC61557-1; IEC61557-2; IEC 61010-1:1002, IEC 61010.1-04, and IEC/EN 61010-1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2 • Weight 1.2lb./550g • Dimensions 1.97 x 3.94 x 8.00 inches/5.0 x 10.0 x 20.3cm (H x W x D) Payment: -Accept PayPal only Shipping: -Item will be ship through FedEx -Item will be ship to Continental United States only Pls Look at the Picture Carefully What you see and describe is what exactly im selling.