Fluke 323 Digital LCD Clamp Meter Multimeter Root Mean Square RMS AC DC Voltage, US $114.97 – Picture 0

Fluke 323 Digital LCD Clamp Meter Multimeter Root Mean Square RMS AC DC Voltage, US $114.97 – Picture 1

Fluke 323 Digital Lcd Clamp Meter Multimeter Root Mean Square Rms Ac Dc Voltage

US $114.97

Grand Prairie, Texas, United States
Jan 29th

Open on mobile:
QR code

The Fluke 323 digital clamp meter is a true RMS sensing, auto ranging multi-meter for measuring current, voltage, and resistance in electrical testing applications. It has a clamp that measures AC current to 400 amps. The clamp has two jaws that can close around an electrical conductor up to 30mm in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC and DC voltage to 600V and resistance to 40 kilohms. An audible continuity sensor confirms that the circuit conducts electricity. To aid documentation of readings & capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The meter has a rotary switch to select the property to measure, and a four digit LCD that shows readings. The unit operates on two AAA batteries, and it has a low-battery indicator that signals when the battery needs to be replaced. Clamp meters are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor. This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. It meets International Electrotechnical Commission (IEC) safety standard 61010-1 and is rated for CAT IV installations to 300V, which covers measurements at the source of the low-voltage supply such as electricity meters and overcurrent protection devices, and CAT III installations to 600V, which covers items used with enclosed building circuit installations, such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply. The European Conformity (CE) marking indicates compliance with applicable European Union directives. The unit comes with a test lead set, a carrying case, and instructions. Specifications Maximum AC input 400 amp Maximum AC voltage input 600V Maximum DC voltage input 600V Maximum resistance detected 40 K? Installation rating CAT IV, 300V; CAT III, 600V Ingress protection IP30 Standards met IEC safety standard 61010-1; CE marking; CSA; Australia N10140 Power supply (2) AAA batteries Weight 265g Dimensions 207 x 75 x 34mm (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Clamp meters, also called clamp on meters, measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. A current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA. What's in the Box? Fluke 323 True-RMS clamp meter Test lead set Soft case Instructions Onegoodideal Store Terms and Conditions: Shipping: Item usually takes 1-3 business days to ship once payment has been received and cleared. Item usually takes 4-10 business days to arrive. International items usually takes 15-30 days to arrive. Shipping is within the continental United States Only, (Lower 48 states). I cannot combine shipping or offer local pick ups. I cannot ship to PO Boxes or APO's. Payment: Currently, only payments made via Paypal are allowed. Backorders: Most of my items are sourced in the US however I also source a few items internationally. In the unlikely event this item is on back order, I will contact you to for further instructions. We can wait for the item or receive a 100% refund. Feedback: Feedback is extremely important to me and you. If you have any issues please contact me prior to any negative feedback. Your questions will be answered in a quick professional manner. I will leave feedback as soon as payment is received. I am deeply grateful for you and I hope to serve your needs on other items as well.