Fluke 743B Documenting Process Calibrator 743, US $1,995.00 – Picture 0

Fluke 743B Documenting Process Calibrator 743, US $1,995.00 – Picture 1

Fluke 743B Documenting Process Calibrator 743, US $1,995.00 – Picture 2

Fluke 743B Documenting Process Calibrator 743, US $1,995.00 – Picture 3

Fluke 743B Documenting Process Calibrator 743, US $1,995.00 – Picture 4

Fluke 743B Documenting Process Calibrator 743, US $1,995.00 – Picture 5

Fluke 743B Documenting Process Calibrator 743, US $1,995.00 – Picture 6

Fluke 743B Documenting Process Calibrator 743, US $1,995.00 – Picture 7

Fluke 743b Documenting Process Calibrator 743

US $1,995.00

Toledo, Ohio, United States
Mar 25th

Open on mobile:
QR code

Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: Fluke 743B Documenting Process Calibrator (BC# 19941) (2) Fluke 1000V Hard Point Test Leads (1-Red, 1-Black) Fluke BC7217 Battery Charger Battery Pack AC Adapter/Charger RS232 PC Interface Cable User Manual On CD-ROM Strap For Unit Carrying Case (G) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Fluke 743B Documenting Process Calibrator The 743B does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. Includes Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange The 743B does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. For documentation, the 743B automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations. The 743B has a PC interface that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis. With its expanded memory, the 743B can hold a full week of calibrations and procedures. The 743B is easy to use with flexible test strategies. And like all Fluke tools, it's rugged, reliable and tough as nails. It's like having several powerful tools in one - so you can work faster than ever: Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters Power transmitters during test using loop supply with simultaneous mA measurement Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules Measure and source with one compact, rugged, reliable tool Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc. Easy to use Bright white display. Read both sourced and measured parameters. Multi lingual interface Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1msec. Standard delivered with DPC/Track Sample software. Compatible with many Asset Management software packages. Specifications: Measurement Accuracy Voltage DC 110.000 mV 0.025%+0.015% * 1.10000 V 0.025%+0.005% * 11.0000 V 0.025%+0.005% * 110.000 V 0.05%+0.005% * 300.00 V 0.05%+0.005% * Voltage AC 20 to 40 Hz 2% + 10 40 to 500 Hz 0.5% + 5 500 to 1 kHz 2% + 10 1 kHz to 5 kHz 10% + 20 Ranges: 1.1000, 11.000, 110.00, 300V Current DC 30.000 mA 0.01% + 0.015% * 110.00 mA 0.01% + 0.015% * Resistance 11.000 ? 0.05% + 50 m? 110.00 ? 0.05% + 50 m? 1.1000 k? 0.05% + 500 m? 11.000 k? 0.1% + 10 ? Frequency 1.00 to 109.99 Hz 0.05 Hz 110.0 to 1099.9 Hz 0.5 Hz 1.100 to 10.999 kHz 5 Hz 11.00 to 50.00 kHz 50 Hz Pressure Accuracy from 0.025% of range using any of 29 pressure modules. (for detailed specifications refer to pressure modules in options and accessories) Modules available for differential, gage, vacuum, absolute, dual and high pressure. Note * (% of reading + % of full scale) Source Accuracy Voltage DC 110.000 mV 0.01%+0.005% * 1.10000 V 0.01%+0.005% * 15.0000 V 0.01%+0.005% * Current DC 22.000 mA (Source) 0.01%+ 0.015% * 22.000 mA (Simulate) 0.02% + 0.03% * Resistance 11.000 ? 0.01% + 20 m? 110.00 ? 0.01% + 40 m? 1.1000 k? 0.02% + 500 m? 11.000 k? 0.03% + 5? Frequency 0.00 to 10.99 Hz 0.01 Hz 11.00 to 109.99 Hz 0.1 Hz 110.0 to 1099.9 Hz 0.1 Hz 1100 to 21999 Hz 2 Hz 22.000 to 50.000 kHz 5 Hz Note * (% of reading + % of full scale) RTDs and Thermocouples Measure Accuracy: 10 ? Cu (427): 2 °C 100 ? Pt (3916): 0.3 °C 100 ? Pt (3926): 0.3 °C 100 ? Pt (385): 0.3 °C 200 ? Pt (385): 0.3 °C 500 ? Pt (385): 0.3 °C 1000 ? Pt (385): 0.3 °C 120 ? Ni (672): 0.3 °C note: For 2-and 3-wire measurement, add 0.4 °C E: 0.3 °C N: 0.5 °C J: 0.3 °C L: 0.3 °C K: 0.3 °C T: 0.3 °C U: 0.3 °C B: 0.9 °C R: 1.0 °C S: 0.9 °C C: 0.6 °C note: Accuracy with external cold junction, for internal junction add 0.2 °C Source Accuracy: 10 ? Cu (427): 1 °C 100 ? Pt (3916): 0.1°C 100 ? Pt (3926): 0.1°C 100 ? Pt (385): 0.1°C 200 ? Pt (385): 0.1°C 500 ? Pt (385): 0.1°C 1000 ? Pt (385): 0.1°C 120 ? Ni (672): 0.1°C note: For 2-and 3-wire simulation, add 0.4 °C E: 0.2 °C N: 0.3 °C J: 0.2 °C L: 0.2 °C K: 0.3 °C T: 0.3 °C U: 0.3 °C B: 0.8 °C R: 0.9 °C S: 0.9 °C C: 0.6 °C note: Accuracy with external cold junction, for internal junction add 0.2 °C Specifications Data Log Functions Measure functions: Voltage, current, resistance, frequency, temperature, pressure Reading rate: 1, 2, 5, 10, 20, 30, or 60 readings/minute Maximum record length: 8000 readings (7980 for 30 or 60 readings/minute) Ramp Functions Source functions: Voltage, current, resistance, frequency, temperature Rate: 4 steps/second Trip detect: Continuity or voltage (continuity detection not available when sourcing current) Loop Power Function Voltage: Selectable, 24 V or 28 V Accuracy: 5% Maximum current: 22 mA, short circuit protected Maximum input voltage: 30 V DC Step Functions Source Functions Voltage, current, resistance, frequency, temperature Manual Step Selectable step, change with arrow buttons Autostep Fully programmable for function, start delay, stepvalue, time per step, repeat Environmental Specifications Operating Temperature -10°C to +50°C -20°C to +50°C * Storage Temperature -20°C to +60°C Dust/water resistance Meets IP52, IEC 529 Operating Altitude 2800 m Note * Except frequency and AC Safety Specifications Agency Approvals CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993 Mechanical & General Specifications Size 130 x 236 x 61 mm Weight 1.4 kg Batteries NiCd: 7.2V, 1.7 Ah Battery Life ~8 hours typical Battery Replacement Via snap-shut door without opening calibrator; no tools required Side port connections Pressure module connector RS-232 connector for PC interface cable Connection for optional battery eliminator Data storage capacity 1 week of calibration results 90 day specifications The standard specification intervals for the 743B is 1 and 2 years. Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "%of output" specifications by 2. Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant. Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Powers Your Online Marketplace Grow your business, not your staff with Kyozou eBay Management Software

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Brand	Fluke
Model	743B