Fluke 805 Vibration Meter mechanical troubleshooting and maintenance F805, US $1,286.31 – Picture 0

Fluke 805 Vibration Meter mechanical troubleshooting and maintenance F805, US $1,286.31 – Picture 1

Fluke 805 Vibration Meter mechanical troubleshooting and maintenance F805, US $1,286.31 – Picture 2

Fluke 805 Vibration Meter mechanical troubleshooting and maintenance F805, US $1,286.31 – Picture 3

Fluke 805 Vibration Meter mechanical troubleshooting and maintenance F805, US $1,286.31 – Picture 4

Fluke 805 Vibration Meter mechanical troubleshooting and maintenance F805, US $1,286.31 – Picture 5

Fluke 805 Vibration Meter mechanical troubleshooting and maintenance F805, US $1,286.31 – Picture 6

Fluke 805 Vibration Meter Mechanical Troubleshooting And Maintenance F805

US $1,286.31

shanghai, China
Jan 29th

Open on mobile:
QR code

The Reliable, Repeatable, Accurate Way to Check Bearings and Overall Vibration Make go or no-go maintenance decisions with confidence. The Fluke 805 Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition. What Makes the 805 the Best Choice? A meter – not a pen – that measures overall vibration as well as specific variables like bearing condition and temperature, to provide a more complete picture A combination vibration and force sensor tip that compensates for user variance (force or angle) yielding accurate, repeatable readings A four-level severity scale and onboard processor calculate bearing condition and overall vibration using easy-to-understand textual alerts (Good, Satisfactory, Unsatisfactory, Unacceptable) Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz) covering most machine and component types Straight-forward user interface that minimizes the user inputs to RPM range and equipment type Features and Benefits Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure Consistent data quality at both low and high frequency ranges Four-level scale indicates severity of problems for overall vibration and bearing condition Exportable data via USB Trending in Microsoft® Excel using built-in templates Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines Crest Factor+ provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements Temperature measurement with Infrared Temperature Sensor increases diagnostic capabilities On-board memory holds up to 3,500 measurements Audio output for listening to bearing tones directly External accelerometer support for hard to reach locations Flashlight for viewing measurement locations in dark areas Large screen with high resolution for easy navigation and viewing Use the 805 to check the following machine categories: Chillers (refrigeration) Fans Cooling tower drives Centrifugal pumps Positive displacement pumps Air compressors Blowers Generic gearboxes (rolling element bearings) Machine tools (motor, gearboxes, spindles, etc.) What is Crest Factor+? Crest Factor+ is a new proprietary algorithm (or technology) that takes the confusion out of bearing assessment. The original Crest Factor is used by vibration analysts to identify bearing faults. It is defined as the ratio of the peak value/RMS value of a time domain vibration signal. A key limitation of the original Crest Factor algorithm is that it does not increase linearly as the bearing degrades, making it very difficult to determine the severity of mechanical issues. In fact, the Crest Factor can actually decrease as a bearing nears catastrophic failure due to large RMS values. In order to overcome this limitation, Fluke uses a proprietary algorithm known as Crest Factor+ (CF+). CF+ values range from 1 to 16. As the bearing condition worsens, the CF+ value increases, ensuring the user is easily able to recognize the severity of the problem. To make things even simpler, Fluke has also included a four-level severity scale that identifies the bearing health as Good, Satisfactory, Unsatisfactory or Unacceptable. Exporting and trending with the 805 Click image to enlarge Trending, or repeated vibration measurements kept in a spreadsheet over time, is the best method to track machine health. With 805 you can easily: Export your result to Excel through USB connection Trend the readings with the pre-built Microsoft® Excel templates and plot graphs Compare the overall vibration readings to ISO Standards (10816-1, 10816-3, 10816-7) Vibration Meter Low Frequency Range (Overall Measurement) 10 Hz to 1,000 Hz High Frequency Range (CF+ Measurement) 4,000 Hz to 20,000 Hz Severity Levels Good, satisfactory, unsatisfactory, unacceptable Vibration Limit 50 g peak (100 g peak-peak) A/D Converter 16-bit Signal To Noise Ratio 80 dB Sampling Rate Low frequency 20,000 Hz High frequency 80,000 Hz Real Time Clock Backup Coin battery Sensor Sensitivity 100 mV g ± 10% Measurement Range 0.01 g to 50 g Low Frequency Range (Overall Measurement) 10 Hz to 1,000 Hz High Frequency Range 4,000 Hz to 20,000 Hz Resolution 0.01 g Accuracy At 100 Hz ± 5% of measured value Amplitude Units Acceleration g, m/sec? Velocity in/sec, mm/sec Displacement mils, mm Infrared Thermometer (Temperature Measurement) Range -20 °C to 200 °C (-4 °F to 392 °F) Accuracy ±2 °C (4 °F) Focal Length Fixed, at ~3.8 cm (1.5") External Sensor Note: Fluke supports but does not provide external sensors Frequency Range 10 Hz to 1,000 Hz Bias Voltage (To Supply Power) 20 V dc to 22 V dc Bias current (To Supply Power) Maximum 5 mA Firmware External Interfaces USB 2.0 (full speed) communication Data Capacity Database on internal flash memory Upgrade Through USB Memory Up to 3,500 measurements Radiated Emission Electrostatic Discharge: Burst Standard EN 61000-4-2 Electromagnetic Interference Standard EN 61000-4-3 RE Standard CISPR 11, Class A Environmental Operating Temperature -20 °C to 50 °C (-4 °F to 122 °F) Storage Temperature -30 °C to 80 °C (-22 °F to 176 °F) Operating Humidity 10% to 95% RH (non-condensing) Operating/Storage Altitude Sea level to 3,048 meters (10,000 feet) IP Rating IP54 Vibration Limit 500g peak Drop Test 1 meter General Specifications Battery Type AA (2) Lithium Iron Disulfide Battery Life 250 measurements Size (L x W x H) 24.1 cm x 7.1 cm x 5.8 cm (9.5 in x 2.8 in x 2.3 in) Weight 0.40 kg (0.89 lb) Connectors USB mini-B 7-pin, stereo audio output jack (3.5 mm Audio Plug), external sensor jack (SMB connector) Notice: The standard package don't include batteries.Because,the international air shipping forbid to ship liquid,powder and batteries,we can not put them in the package box.Hope you can understand buy them in your local store or supermarket.Thanks for your support! Shipping: We will ship all items within 1-3 working days upon receipt of payment,our goal is: ship it as fast as we can. Standard Shipping: To USA,UK and Australia Canada France by ePacket,need 7-15 working days. Other by China post or Singapore post ,need 15-35 working days. Expedited/Standard Int'l Shipping by Fedex,DHL,UPS and EMS courier: To USA,need 3-6 business days,To other countries,need 4-8 business days normally.But sometimes int'l delivery is highly depended on the courier company and local customs/duties. Import duties and taxes are not included in the item price or shipping charges.These charges are the buyer responsibility. Warranty&Reture Policy: We encourage all customers to communicate with us through eBay messages. If you have any questions or comments whatsoever regarding our products or listing, we are waiting to hear from you A 1 year warranty is offered for this product.If the product malfunctioned under proper usage per instructions manual within the warranty period, please contact us to obtain shipping instructions and send it back at your shipping costs. 30 days evaluation and investigation takes placed after receiving your return item.A brand new replacement unit will be sent to you at our shipping costs if it meets our warranty requirements.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Fluke
Model	805