Fluke Networks Ts30 Test Set

US $68

Cocoa, Florida, United States
Jun 17th

Open on mobile:
QR code

Used Fluke Networks TS30 Telephone Test Set The Fluke Networks TS30 telephone test set, available with various line cord connectors to suit specific applications, detects dial tone and polarity; places and receives calls; monitors lines without disrupting service; and retains one 23-digit redial number for about eight minutes. It provides tone or pulse operation. A pair of LEDs on the front of the unit indicates line polarity when off hook. The test set passes a 20-foot (6 m) drop test and is Ingress Protection certified IP54 for protection against dust and splashed water. The keypad has 12 standard dialing keys including star and pound, and function keys to mute, check polarity, redial a number, and pause for accessing a second dial tone when dialing through a PBX (private branch exchange). A two-position switch allows selection of monitor mode for high-impedance monitoring without disrupting service, and talk mode for dialing and talking. The test set is made of high-impact polycarbonate that provides excellent insulating properties. Its contoured hand grip rests on the shoulder to enable hands-free operation. A spring-loaded belt clip at the base of the unit provides a secure hold on belt loops and D-rings. Additional specifications include various environmental operating conditions. Telephone test sets, also called butt sets, are used by telecom technicians to troubleshoot and maintain copper-wire voice-subscriber lines.Selling as is in good working order. Has minor cosmetic scuffs and rubber boot where wires come out. Specifications Line current range 15 to 120 mA DC resistance (talk mode) 270 ? (typical) at 20 mA Monitor mode impedance 120 k? , 300 to 3400 kHz Rotary dial pulse rate 10 + or ? 1 pulses per second DTMF (dual-tone multi-frequency) tone frequency error + or ? 1.5% maximum Voltage protection 250 Vrms across the test leads Memory capacity One 23-digit redial number Agency certifications and standards met CE (European Conformity) marking; Canadian Standards Association CAN/CSA-C22.2 No. 60950-1-03, CAN/CSA-C22.2 No. 1010.1-92, and CSA-C22.2 No. 1010.1B-97; UL/ANSI (Underwriters Laboratories/American National Standards Institute) 3111-1 Power source Shared line power Dimensions 25.5 x 7.2 x 8.5 cm/10 x 2.83 x 3.34 in (H x W x D) Weight 0.476 kg/26.8 oz Datacom and telecom installation and test devices, such as toners and test sets, check cabling and wiring to help ensure proper connections and operation. Tone generator and probe sets, also called toners, are used to locate, trace, and isolate cables in copper media networks. Telephone test sets, also called butt sets, are specialized telephones that connect to telephone lines to check for proper operation and to isolate trouble. Some test sets incorporate a TDR (time-domain reflectometer) and toner for determining cable length and locating faults. While certain devices may be used on live networks, others are only suitable for inactive networks. Field technicians and installers use these devices to set up, maintain, and troubleshoot datacom and telecom cabling within a building or in outside plant (OSP) applications. What's in the Box? Used Fluke Networks TS30 test set - Detects dial tone and polarity, and places and receives calls during testing of telephone lines - High impedance DataSafe operation in monitor mode - DropSafe reliability passes 20-foot drop test - RainSafe protection in severe weather conditions - Mute switch, last number redial, and audible ringer for callbacks