Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit, US $4,500.00 – Picture 0

Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit, US $4,500.00 – Picture 1

Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit, US $4,500.00 – Picture 2

Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit, US $4,500.00 – Picture 3

Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit, US $4,500.00 – Picture 4

Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit, US $4,500.00 – Picture 5

Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit, US $4,500.00 – Picture 6

Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit, US $4,500.00 – Picture 7

Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit, US $4,500.00 – Picture 8

Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit, US $4,500.00 – Picture 9

Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit, US $4,500.00 – Picture 10

Fluke Simplifiber Pro Kits Ftk1450 Complete Fiber Verification Kit

US $4,500.00

Bartlett, Illinois, United States
Jan 29th

Open on mobile:
QR code

Fluke SimpliFiber Pro Kits FTK1450 Complete Fiber Verification Kit This Fiber Verification Kit is in great condition and was used only a few times. We are including additional adapters including (FBET) - FC, U25M, U12M. New Unit Cost is more than $6,000! What's in the Box? · SimpliFiber Pro optical power meter · SimpliFiber Pro 850/1300 nm source · SimpliFiber Pro 1310/1550 nm source · VisiFault visual fault locator · FT500 FiberInspector mini video microscope kit: display; probe; probe adapter tips (ST, SC, and universal 2.5 mm patch cord tip); AC adapter/charger; hex key; soft carrying case · (2) FindFiber remote ID sources · Fiber optic cleaning kit: cleaning cube with wipes; (2) cards with sealed cleaning zones; solvent pen; 2.5 mm port cleaning swabs · SC, ST, and LC power meter adapters · USB interface cable · LinkWare PC software CD · SimpliFiber Pro product manuals CD · (8) AA alkaline batteries (two for each device) · Carrying case · Instructions A fiber optic cable tester is a device for troubleshooting, inspecting, and certifying fiber network cabling. Devices range from one-button tools for checking connectivity to complex tools for certifying proper installation of fiber networks. Some of the devices test either singlemode or multimode fiber, while others can test both singlemode and multimode fiber. Cabling contractors, installers, and network technicians use fiber optic cable testers to set up and maintain networks within a building or on a campus in corporate, academic, manufacturing, and other enterprise network environments. Product Description Size: With multimode source, single-mode source, VisiFault VFL, FiberInspector Mini The Fluke Networks FTK1450 fiber optic cable test kit includes a SimpliFiber Pro optical power meter with multimode and single-mode light sources, a VisiFault VFL, and a FT-500 FiberInspector mini video microscope for verification and inspection of cabling in high-bandwidth enterprise networks. The SimpliFiber Pro optical power meter with multimode and singlemode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths—850 nm and 1300 nm wavelengths for the multimode source and 1310 nm and 1550 nm for the singlemode source. The power meter is also calibrated for 1490 and 1625 nm wavelengths when paired with a compatible singlemode light source (sold separately). A minimum and maximum function tracks power fluctuations and a reference value can be set to enable a display of fiber loss. The meter's internal memory stores up to 1,000 test results, and those results can be downloaded via the meter's USB interface to a computer for long-term records retention, or for analysis and generation of certification reports using the included LinkWare Software. The meter emits an audible tone and displays an icon when a live link or port is detected. Test results are displayed on a black and white LCD that has a backlight for visibility in low light. The meter can be set to turn off automatically after 10, 20, 30, or 60 minutes of non-use to conserve battery life. Additional specifications include power measurement accuracy of +/– 0.25 dB and various environmental operating conditions. Multimode fiber testers are used by network technicians to troubleshoot, maintain, and optimize performance of fiber optic cable in enterprise networks. The VisiFault VFL (visual fault locator) traces fibers, checks continuity and polarity, and helps find breaks, connectors, and splices in multimode and singlemode fiber, emitting a high-visibility red laser that can be set for continuous or flashing output to trace and identify fibers. It includes a 2.5mm universal adapter that is compatible with SC, ST, FC, and FJ connectors. Additional specifications include various environmental operating conditions. The FT500 FiberInspector mini video microscope magnifies to 200X to enable inspection of multimode and single-mode fiber end-faces inside ports and on patch cords to check for contamination or damage. It has a 4.6 cm (1.8 in) TFT (thin film transistor) LCD for viewing end faces, and includes a set of probe adapter tips—ST, SC, and universal 2.5 mm patch cord tip—for accommodating different connector ports. Two FindFiber remote IDs allow for simultaneous monitoring of both ends of a link. They plug into remote patch-panel ports or drops at one end of a link, and transmit a unique signal to the SimpliFiber Pro at the other end, for identifying a fiber and checking connectivity and polarity. In addition to the SimpliFiber Pro meter with multimode source, the VisiFault VFL, the FiberInspector mini, and the FindFiber remote IDs, the kit includes accessories for the FiberInspector (probe adapter tips, AC adapter/charger, hex key, soft carrying case), power meter adapters (SC, ST, and LC), a fiber optic cleaning kit, a USB interface cable, LinkWare PC Software CD, SimpliFiber Pro product manuals CD, batteries for each device, a carrying case, and instructions. SimpliFiber Pro Optical Power Meter Specifications Detector type InGaAs (indium gallium arsenide nitride) Cable compatibility Multimode and singlemode fiber Calibrated wavelengths 850, 1300, 1310, 1490, 1550, and 1625 nm Power measurement range +10 to -60 dBm (+10 to -52 dBm for 850 nm wavelength) Power units of measure dBm, mW, ?W Display resolution 0.01 dB Connector type Removable SC, LC, ST, and FC adapters Agency certifications and standards met Conforms to relevant European Union directives and Australian standards; listed by the Canadian Standards Association; complies with 21CFR.1040.10,11, and EN60825-1, 2:2007 (Class 1, Hazard Level 1) Power source (2) AA alkaline batteries (included) Dimensions 16.5 x 8.0 x 3.9 cm/6.4 x 3.2 x 1.5 in (H x W x D) Weight 325 g/11.5 oz SimpliFiber Pro 850/1300 Multimode Source Specifications Emitter type LED Wavelengths 850 nm (+ or – 30 nm); 1300 nm (+ or – 20 nm) Spectral width, FWHM (full width at half maximum) 50 nm (typical) for 850 nm wavelength; 170 nm (maximum) for 1300 nm wavelength Minimum output power Greater than or equal to –20 dBm Connector type Fixed SC Output modes Continuous wave, 2 kHz pulse, auto-wavelength Power source (2) AA alkaline batteries (included) Dimensions 14.2 x 8.1 x 4.1 cm/5.6 x 3.2 x 1.6 in (H x W x D) Weight 278 g/9.8 oz SimpliFiber Pro 1310/1550 Singlemode Source Specifications Emitter type FP laser Wavelengths 1310 nm (+ or – 20 nm); 1550 nm (+ or – 30 nm) Maximum spectral bandwidth 2 nm for 1310nm wavelength; 3 nm for 1550 nm wavelength Minimum output power (typical) Greater than or equal to –7 dBm Connector type Fixed SC Output modes Continuous wave, 2 kHz pulse, auto-wavelength Power source (2) AA alkaline batteries (included) Dimensions 14.2 x 8.1 x 4.1 cm/5.6 x 3.2 x 1.6 in (H x W x D) Weight 278 g/9.8 oz VisiFault VFL Specifications Emitter type Class II laser Cable compatibility Multimode and singlemode fiber Visible wavelength 650 nm Detection distance 3 km for multimode fiber; 4 km for singlemode fiber Output power Less than 1.3 mW Output modes Continuous wave, 2 to 3 Hz pulse Connector type Universal 2.5 mm adapter Agency certifications and standards met European Conformity (CE) marking, Canadian Standards Association (CSA) C22.2 No. 1010.1: 1992, European Standard (EN) 61010-1 Power source (2) AA alkaline batteries (included) Dimensions 157 x 52 x 37 mm/6.2 x 2.0 x 1.3 in (H x W x D) Weight (including batteries) 0.18 kg/5.7 oz FT500 FiberInspector Mini Video Microscope Specifications Display type 4.6 cm/1.8 in TFT-LCD Magnification 200X Light source LED Field of view 700 ?m Detection capability 2 ?m Standard met European Conformity (CE) marking Power source Rechargeable NiMH battery (installed) or AC power Probe dimensions (without tip) 140 x 46 x 44 mm/ 5.5 x 1.8 x 1.7 in (H x W x D) Display unit dimensions 100 x 72 x 43 mm/3.9 x 2.8 x 1.7 in (H x W x D) Weight (probe and display) 230 g/8.1 oz H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Fluke
Model	FTK 1450