+ Post new Ad
Force Gage 100lb, Mark-10, MG-50L, Tension & Compression Force, US $620 – Picture 0
Force Gage 100lb, Mark-10, MG-50L, Tension & Compression Force, US $620 – Picture 0

Force Gage 100lb, Mark-10, Mg-50l, Tension & Compression Force

US $620

  • Chicago, Illinois, United States
  • Jun 9th
Open on mobile:
QR code
You are a bidding on a 100lb digital force gage. Gage is in Excellent condition and has been verified with weights for accuracy.    Description:  The Series MG Digital Force Gauge is an economical instrument for push and k hand-held use or test stand mounting. Three pushbuttons allow the user to easily select units of measurement, reset zero, and recall tensile and compressive peak loads. The MG is compatible with all Mark-10 force measurement test stands and gripping fixtures.   Specifications: Accuracy: ±0.5% of full scale Power: AC or non-rechargeable 9V battery, with Intelligent Power Management System (IPM). IPM warns the user via a “LO BAT” indicator and then will power off the gauge. Battery life: 30 hours of continuous use Selectable units of measurement: lbF, N, kgF/gF (depending on model) Load cell deflection (at full scale): See Ordering Information Safe overload: 150% of full scale (display shows “----” at 110% and above) Weight (gauge only): MG012 - MG200: 0.7 lb [0.3 kg], MG500: 0.87 lb [0.4 kg] Environmental requirements: 40° F - 100°F [5°C - 45°C], <96% humidity (non-condensating) Housing construction: Aluminum Included accessories: Hook, flat Warranty 3 years (see individual statement for further details)o

Directions

Similar products from Multidetectors & Inspection Gauges

MEYER GAGE CO - CLASS ZZ GAGE PINS - LOT OF 6 ASSORTED PINS .477+ to .485+

MEYER GAGE CO - CLASS ZZ GAGE PINS - LOT OF 6 ASSORTED PINS .477+ to .485+

  • San Jose, California, United States
  • Jun 9th
VINTAGE Pratt &amp; Whitney # 1856-107 Tri-Roll Thread Comparator W/O Gage USA MADE

VINTAGE Pratt & Whitney # 1856-107 Tri-Roll Thread Comparator W/O Gage USA MADE

  • Oxnard, California, United States
  • Jun 9th
2x Thread Ring Gage 1/2&#034;-20 UNF-3AL 1643 GO PD No Go Set

2x Thread Ring Gage 1/2"-20 UNF-3AL 1643 GO PD No Go Set

  • Oxnard, California, United States
  • Jun 9th
PENNOYER-DODGE CO 1/4-28 NF-3A .2268 .2243 NO GO PD THREAD PLUG GAGE

PENNOYER-DODGE CO 1/4-28 NF-3A .2268 .2243 NO GO PD THREAD PLUG GAGE

  • Oxnard, California, United States
  • Jun 9th
GE Inspection Krautkramer MIC10 Hardness Tester UT Flaw Detector Panametrics NDT

GE Inspection Krautkramer MIC10 Hardness Tester UT Flaw Detector Panametrics NDT

  • Pooler, Georgia, United States
  • Jun 9th
Starrett S830F SMALL HOLE GAUGES

Starrett S830F SMALL HOLE GAUGES

  • Niagara, Wisconsin, United States
  • Jun 9th
PANAMETRICS 25DL PC SCOPE PART NO. 25/SM SERIAL PARALLEL PC/PRINTER ADAPTER ???

PANAMETRICS 25DL PC SCOPE PART NO. 25/SM SERIAL PARALLEL PC/PRINTER ADAPTER ???

  • Lincoln, Nebraska, United States
  • Jun 9th
NEW MOORE &amp; WRIGHT 316-041 DIAL BORE GAGE SET 1.4&#034; - 2.4&#034; Grad .0005&#034; EB3B.3

NEW MOORE & WRIGHT 316-041 DIAL BORE GAGE SET 1.4" - 2.4" Grad .0005" EB3B.3

  • Perth, Ontario, Canada
  • Jun 9th
L.S. Starrett Co. 254 13.5&#034; Master Vernier Height Gage Resolution .001

L.S. Starrett Co. 254 13.5" Master Vernier Height Gage Resolution .001

  • Ventura, California, United States
  • Jun 9th
Mitutoyo No 2904 inspection gauge and mighty mag

Mitutoyo No 2904 inspection gauge and mighty mag

  • Morongo Valley, California, United States
  • Jun 9th
Used Mitutoyo 192 LCD Digital Height Gauge 0-12&#034; 0-300mm W/O Probe Accessories

Used Mitutoyo 192 LCD Digital Height Gauge 0-12" 0-300mm W/O Probe Accessories

  • GD, China
  • Jun 9th
3-Axis Accelerometer XYZ Digital Vibration Tester Meter Vibrometer VM-6380 3D

3-Axis Accelerometer XYZ Digital Vibration Tester Meter Vibrometer VM-6380 3D

  • Hangzhou,Zhejiang, China
  • Jun 9th
100% Warranty New Digital Ultrasonic Flaw Detector Defectoscope YFD300 0~10000mm

100% Warranty New Digital Ultrasonic Flaw Detector Defectoscope YFD300 0~10000mm

  • Hangzhou,Zhejiang, China
  • Jun 9th
Vintage Starrett No. 454 Height guage

Vintage Starrett No. 454 Height guage

  • Langley, Kentucky, United States
  • Jun 9th
Mitutoyo 985-126 Hardened Steel Parallel Clamp, 1.96&#034; Height, 1.18&#034; Length,

Mitutoyo 985-126 Hardened Steel Parallel Clamp, 1.96" Height, 1.18" Length,

  • USA, United States
  • Jun 9th
LS Starrett Co Cylinder Gauge 452B for Bore Roundness Inspection

LS Starrett Co Cylinder Gauge 452B for Bore Roundness Inspection

  • Greenfield, Massachusetts, United States
  • Jun 9th
BROWN &amp; SHARPE 599-290-42 INTERNAL MIC INTRIMIK .350 - .425&#034; &lt;-- GREAT SHAPE

BROWN & SHARPE 599-290-42 INTERNAL MIC INTRIMIK .350 - .425" <-- GREAT SHAPE

  • Staten Island, New York, United States
  • Jun 9th
STARRETT NO 448 M&amp;E VERNIER DEPTH GAGE W 12&#034; &amp; 6&#034; BLADES AND WOODEN CASE

STARRETT NO 448 M&E VERNIER DEPTH GAGE W 12" & 6" BLADES AND WOODEN CASE

  • San Antonio, Texas, United States
  • Jun 9th
New FOOTPRINT TOOLS 160200 Premium Rosewood 6&#034; Woodworkin Mortice Marking Gauge

New FOOTPRINT TOOLS 160200 Premium Rosewood 6" Woodworkin Mortice Marking Gauge

  • Troy, Michigan, United States
  • Jun 9th
Ono Sokki Digital Tachometer HT-4100

Ono Sokki Digital Tachometer HT-4100

  • Bakersfield, California, United States
  • Jun 9th

People who viewed this item also vieved

6&#034; Digital Caliper 4-Key 0.0005&#034; Hold Key Calipers New

6" Digital Caliper 4-Key 0.0005" Hold Key Calipers New

  • San Gabriel, California, United States
  • Jan 30th
6&#034; Digital Water-Proof Caliper 0.0005&#034; Calipers IP67

6" Digital Water-Proof Caliper 0.0005" Calipers IP67

  • San Gabriel, California, United States
  • Jan 30th
Jones and Lamson FC-30 Optical Comparator Lens 31.25x (Inv.31797)

Jones and Lamson FC-30 Optical Comparator Lens 31.25x (Inv.31797)

  • Portland, Connecticut, United States
  • Jan 30th
RAM Optical OMIS Control With EuroCard

RAM Optical OMIS Control With EuroCard

  • Bay Village, Ohio, United States
  • Jan 30th
Machinist tools,Doall gauge block set

Machinist tools,Doall gauge block set

  • Bennington, New Hampshire, United States
  • Jan 30th
Vintage STARRETT 270 Taper Gage Measuring Range: .010&#034;~.150&#034;,0.3mm~4mm

Vintage STARRETT 270 Taper Gage Measuring Range: .010"~.150",0.3mm~4mm

  • Sparks, Nevada, United States
  • Jan 30th
Starrett scale

Starrett scale

  • Potsdam, New York, United States
  • Jan 30th
TECLOCK .25&#034; .001&#034; dial indicator #2

TECLOCK .25" .001" dial indicator #2

  • Morgantown, West Virginia, United States
  • Jan 30th
Brown And Sharpe Magnetic Chuck / Base

Brown And Sharpe Magnetic Chuck / Base

  • Dayton, Ohio, United States
  • Jan 30th
NEW Mini Magnetic Base Stand Holder Stand For Digital Test Indicator Tool

NEW Mini Magnetic Base Stand Holder Stand For Digital Test Indicator Tool

  • ???, ???, China
  • Jan 30th
STARRETT DEPTH GAGE No. 445 Precision Measuring Instrument machining tooling

STARRETT DEPTH GAGE No. 445 Precision Measuring Instrument machining tooling

  • Allenton, Michigan, United States
  • Jan 30th
Scherr-Tumico Micrometer Head 0-1 inch

Scherr-Tumico Micrometer Head 0-1 inch

  • Montclair, California, United States
  • Jan 30th
Reinshaw M8 extension bar kit (2 piece) PEL

Reinshaw M8 extension bar kit (2 piece) PEL

  • West Chicago, Illinois, United States
  • Jan 30th
VINTAGE STARRETT LEVEL 98-6 MACHINIST TOOL

VINTAGE STARRETT LEVEL 98-6 MACHINIST TOOL

  • Newport, Michigan, United States
  • Jan 30th
Kell-Strom Pro 360 Digital Protractor

Kell-Strom Pro 360 Digital Protractor

  • Pagosa Springs, Colorado, United States
  • Jan 30th
Helios steel protractor angle finder made in Germany 7 7/8&#034; long

Helios steel protractor angle finder made in Germany 7 7/8" long

  • Houlton, Maine, United States
  • Jan 30th
1 NEW SHINWA 3102C 12&#034; STAINLESS HARDENED RULER NIP

1 NEW SHINWA 3102C 12" STAINLESS HARDENED RULER NIP

  • Chilhowee, Missouri, United States
  • Jan 30th
Set of Tempered Steel Rules W/Holder Lufkin No. 20-S in Leatherette Case-

Set of Tempered Steel Rules W/Holder Lufkin No. 20-S in Leatherette Case-

  • Hunker, Pennsylvania, United States
  • Jan 30th
BEVEL SQUARE 90? RIGHT ANGLE MACHINIST ENGINEER SQUARE BEVELED 75x50 3&#034; DIN 875

BEVEL SQUARE 90? RIGHT ANGLE MACHINIST ENGINEER SQUARE BEVELED 75x50 3" DIN 875

  • North Hollywood, California, United States
  • Jan 30th
TTC Standard Machinists Steel Squares Set - Blade Length: 2-3/8&#034;, 3-1/8&#034;, 5&#034;

TTC Standard Machinists Steel Squares Set - Blade Length: 2-3/8", 3-1/8", 5"

  • Flushing, New York, United States
  • Jan 30th
Esterline Collins MicroFlat Granite Inspection Surface * 4&#039; L x 3&#039; W x 3.5&#039; H

Esterline Collins MicroFlat Granite Inspection Surface * 4' L x 3' W x 3.5' H

  • Albuquerque, New Mexico, United States
  • Jan 30th
PHOTON GRANITE SURFACE PLATE 40&#039;&#039; X 40&#039;&#039; X 16&#039;&#039;

PHOTON GRANITE SURFACE PLATE 40'' X 40'' X 16''

  • Euclid, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies