+ Post new Ad
Ford 302140500 #28 Solid Carbide Circuit Board Drill 1/8" Shank USA, US $1.25 – Picture 0
Ford 302140500 #28 Solid Carbide Circuit Board Drill 1/8" Shank USA, US $1.25 – Picture 0

Ford 302140500 #28 Solid Carbide Circuit Board Drill 1/8" Shank Usa

US $1.25

  • Crystal Lake, Illinois, United States
  • Jan 30th
Open on mobile:
QR code
Get your circuit board drilling job done with ease using the reliable and durable Ford 302140500 #28 Solid Carbide Circuit Board Drill. A. The drill is brand new and unused and has an overall length of 1-1/2" with a flute length of 5/8" and a 1/8" shank. Remember to wait for your invoice before making payment. Purchase yours today and enjoy a cost-effective shipping rate of only $2.50 within the USA, regardless of the number of drills you buy. Manufactured in the USA by M. Ford Manufacturing, this drill boasts of a 130-degree included angle point and is ideal for use in high-temperature conditions with significant abrasion.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand M.A. FORD MFG.
Country of Manufacture United States

Directions

Similar products from Solid Carbide Drill Bits

Sumitomo MDS126SV 12.6mm Drill Bit NEW

Sumitomo MDS126SV 12.6mm Drill Bit NEW

  • Draper, Utah, United States
  • Jan 30th
A-tec 40-05903 Liquid Cooled End Mill Bit 9.53mm NEW

A-tec 40-05903 Liquid Cooled End Mill Bit 9.53mm NEW

  • Draper, Utah, United States
  • Jan 30th
GUHRING HSS UXMW 10.5

GUHRING HSS UXMW 10.5

  • Miamisburg, Ohio, United States
  • Jan 30th
20MM KENNAMETAL Carbide Coolant Drill 2F TIALN

20MM KENNAMETAL Carbide Coolant Drill 2F TIALN

  • Windsor, Connecticut, United States
  • Jan 30th
GARR Drill, New GARR 19/64" Diameter x 3-23/32"" Long, Carbide Hi Preformance D

GARR Drill, New GARR 19/64" Diameter x 3-23/32"" Long, Carbide Hi Preformance D

  • Saunderstown, Rhode Island, United States
  • Jan 30th
(9873) Rapidkut HSS Drill & Tap CX60-R-24U

(9873) Rapidkut HSS Drill & Tap CX60-R-24U

  • Cleveland, Ohio, United States
  • Jan 30th
.531" Garr Tool Solid Carbide Drill, Extra Long

.531" Garr Tool Solid Carbide Drill, Extra Long

  • Abingdon, Maryland, United States
  • Jan 30th
M12 X 1.75 GH4 LEFT HAND SPIRAL FLUTE LONG TAP USA MADE NEW

M12 X 1.75 GH4 LEFT HAND SPIRAL FLUTE LONG TAP USA MADE NEW

  • Mentor, Ohio, United States
  • Jan 30th
WIDIA 13.00 TO 13.49 TOP DRILL USES CARBIDE INSERTS TDM 130RY

WIDIA 13.00 TO 13.49 TOP DRILL USES CARBIDE INSERTS TDM 130RY

  • Mentor, Ohio, United States
  • Jan 30th
7/16"-14 GH3 GUN TAP 3 FLUTE FAST SPIRAL NEW USA MADE

7/16"-14 GH3 GUN TAP 3 FLUTE FAST SPIRAL NEW USA MADE

  • Mentor, Ohio, United States
  • Jan 30th
50 PC. Asst Micro Carbide Drill Bits, #91 to #3 PCB, CNC, Dremel, Watchmaker E

50 PC. Asst Micro Carbide Drill Bits, #91 to #3 PCB, CNC, Dremel, Watchmaker E

  • Yorba Linda, California, United States
  • Jan 30th
50 PC. Asst Micro Carbide Drill Bits, #97 to #15 PCB,CNC, Dremel, Watchmaker C

50 PC. Asst Micro Carbide Drill Bits, #97 to #15 PCB,CNC, Dremel, Watchmaker C

  • Yorba Linda, California, United States
  • Jan 30th
10 PCS D 1,0 mm SOLID CARBIDE DRILL.

10 PCS D 1,0 mm SOLID CARBIDE DRILL.

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
10 PCS D 1,1 mm SOLID CARBIDE DRILL in the protective coating.

10 PCS D 1,1 mm SOLID CARBIDE DRILL in the protective coating.

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
5 PCS D 1,7 mm SOLID CARBIDE DRILL PCB.

5 PCS D 1,7 mm SOLID CARBIDE DRILL PCB.

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
5 PCS D 1,6 mm SOLID CARBIDE DRILL PCB.

5 PCS D 1,6 mm SOLID CARBIDE DRILL PCB.

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
CARBIDE SPADE DRILLS

CARBIDE SPADE DRILLS

  • Pfafftown, North Carolina, United States
  • Jan 30th
4 Atrax 1/16" Carbide Drill Bits, 1/16-1810

4 Atrax 1/16" Carbide Drill Bits, 1/16-1810

  • Abingdon, Maryland, United States
  • Jan 30th
2 QCT #37 Solid Carbide Drill Bits, 220-1040

2 QCT #37 Solid Carbide Drill Bits, 220-1040

  • Abingdon, Maryland, United States
  • Jan 30th
15/64 Solid Carbide Kennametal Drill bit with Coolant holes K411402344

15/64 Solid Carbide Kennametal Drill bit with Coolant holes K411402344

  • Punta Gorda, Florida, United States
  • Jan 30th

People who viewed this item also vieved

COOPER/BUSSMAN, KRP-C-800SP LOW PEAK TIME DELAY FUSE 600V 800A (receive 2 Fuses)

COOPER/BUSSMAN, KRP-C-800SP LOW PEAK TIME DELAY FUSE 600V 800A (receive 2 Fuses)

  • Staten Island, New York, United States
  • Mar 28th
2 Bayard Ratchet Handle Tap Wrenches & 1-1/2 Keo SF High Speed Steel Countersink

2 Bayard Ratchet Handle Tap Wrenches & 1-1/2 Keo SF High Speed Steel Countersink

  • Bessemer, Alabama, United States
  • Mar 28th
Center Drills

Center Drills

  • Kailua Kona, Hawaii, United States
  • Mar 28th
3 MORSE TAPER SHANK 59/64" x 9 3/4" DRILL BIT lathe mill mt tool MFG UNKNOWN

3 MORSE TAPER SHANK 59/64" x 9 3/4" DRILL BIT lathe mill mt tool MFG UNKNOWN

  • Milroy, Indiana, United States
  • Apr 28th
2 USED COLLIS / ROHM MORSE TAPER EXTENSION SOCKETS #1MT to #2MT and #2MT to #2MT

2 USED COLLIS / ROHM MORSE TAPER EXTENSION SOCKETS #1MT to #2MT and #2MT to #2MT

  • Fairfield, Iowa, United States
  • Apr 29th
NEW LOT MILWAUKEE DRILL BITS - FREE S/H

NEW LOT MILWAUKEE DRILL BITS - FREE S/H

  • United States
  • Apr 29th
Vermont 23/32 HSS Taper Length Drill Bit 9.5" OAL USA Made

Vermont 23/32 HSS Taper Length Drill Bit 9.5" OAL USA Made

  • Denver, Colorado, United States
  • Jun 3rd
Extra Long Drill Bit 7/8 Flute length 3" OAL 16 Extended Shank

Extra Long Drill Bit 7/8 Flute length 3" OAL 16 Extended Shank

  • Milton Freewater, Oregon, United States
  • Jun 4th
.8858X4-1/2X9 SS T/C DRILL (LW3030-1)

.8858X4-1/2X9 SS T/C DRILL (LW3030-1)

  • Miami, Florida, United States
  • Jun 5th
Mitsubishi Materials solid carbide drill bit MZS05312MB VP15TF

Mitsubishi Materials solid carbide drill bit MZS05312MB VP15TF

  • Victorville, California, United States
  • May 24th
1.250 X 3 X DOC X 1 1/4 SHANK INDEXABLE INSERT DRILL

1.250 X 3 X DOC X 1 1/4 SHANK INDEXABLE INSERT DRILL

  • Azle, Texas, United States
  • May 24th
1.250 X 4" DOC X 1 1/4 SHANK INDEXABLE INSERT DRILL

1.250 X 4" DOC X 1 1/4 SHANK INDEXABLE INSERT DRILL

  • Azle, Texas, United States
  • May 24th
HUOT 10450 Jobbers Length Drill Indexes-1/16"to 3/8"by 64ths (Pack of 3)

HUOT 10450 Jobbers Length Drill Indexes-1/16"to 3/8"by 64ths (Pack of 3)

  • Duncan, South Carolina, United States
  • May 25th
HUOT 033603-10350 Jobbers Length Drill Indexes-Size: 1/16"to 1/2" (Pack of 3)

HUOT 033603-10350 Jobbers Length Drill Indexes-Size: 1/16"to 1/2" (Pack of 3)

  • Duncan, South Carolina, United States
  • May 25th
RUSHMORE USA 450-403346 Solid Carbide Metric Jobbers Length Twist Drill

RUSHMORE USA 450-403346 Solid Carbide Metric Jobbers Length Twist Drill

  • Duncan, South Carolina, United States
  • May 25th
Forney 20451 Drill Bit HSS 135-Degree Split Point Screw Machine Length Stubby,

Forney 20451 Drill Bit HSS 135-Degree Split Point Screw Machine Length Stubby,

  • USA, United States
  • May 27th
Forney 20460 Drill Bit HSS 135-Degree Split Point Screw Machine Length Stubby,

Forney 20460 Drill Bit HSS 135-Degree Split Point Screw Machine Length Stubby,

  • USA, United States
  • May 27th
Guhring Letter "S" (.348) HSS Parabolic Drill Screw Machine Length

Guhring Letter "S" (.348) HSS Parabolic Drill Screw Machine Length

  • Fort Worth, Texas, United States
  • May 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies