Forma Scientific Dual Chamber Co2 Water Jacketed Incubator Model 3326

US $624.99

  • Lubbock, Texas, United States
  • Jan 30th
For sale is a gently used Forma Scientific Dual Chamber CO2 Water Jacketed Incubator Model 3326. This unit is in very good condition inside and out.  Chamber interiors look almost like new. Both chamber jackets fully water filled for testing.  Verified that there are no water leaks. To test heaters, both were set to approximately 55 deg C.  Photo of readouts at 54.3 and 54.1 deg C was taken 12 hours later. Door heaters of both chambers tested and verified to function properly. Low water sensors of both chambers tested and verified to function properly. Water will be drained for shipping to reduce weight and cost. No CO2 gas supply components are included.  CO2 level sensors were not tested as I do not have the equipment to do this properly. Operation manual included (73 pages), will be provided in printed and electronic form. Decontamination kits available from Forma Scientific for $92.40 each. (Not included with this item.)  Two are required, one per chamber.  Cost is $92.40 each.  Call (800) 848-3080 to order. Six stainless steel shelves are included.  Positions are adjustable. One stainless steel humidification pan included. Key features: Independent controls for each chamber. Two temperature control modes.  Mode 1: fixed to 37 deg C set-point.  Mode 2: variable from 5 deg C above ambient to 60 deg C. Door heaters which automatically adjust to ambient conditions to provide a condensate-free (glass) door for unhampered viewing of the product in the chamber without unnecessary door openings which might temporarily disturb temperature, humidity, and CO2 control. Ultra-flat, vibration-free shelves to provide optimal culturing conditions. Direct-set CO2, temperature, and alarm set-points. Digital readout of temperature and CO2 conditions in the chamber surrounding the product. Sealed chamber to minimize CO2 consumption. Sealed water jacket to minimize water evaporation. Instrument screwdrivers mounted in control panels for ease of availability for adjusting alarm set-points. Ease of serviceability features: Front access to all components so that the unit does not have to be moved for service repairs or routine maintenance. Slide-out control panels to allow easy access to electrical components. Plug-in CO2, and temperature/alarm modules to facilitate in servicing or replacement of a particular control module. Self-diagnostic switches in the control module to ease in trouble-shooting the system and determining where a particular problem originates. Ease of disinfecting features: No cracks or crevices on or around the chamber walls to harbor hidden or hard to reach bacterial growth. The stainless steel shelves, shelf channels, and duct sheets are easily removable without use of tools for cleaning and disinfection of the entire interior. The blower wheel is disposable and easily replaced. Product protection features: An add water audible alarm and indicator light to alert the operator when the water level in the water jacket has become too low for efficient operation. An audible and visual CO2 alarm which is activated when the CO2 percent in the chamber deviates plus or minus 1%from the control set-point. An over temperature alarm system (light and audible beeper) which is activated when the chamber temperature exceeds control set-point. Chamber capacity: 5.7 cubic feet (.16 cubic meters)  per chamber X 2 chambers Water jacket volume: 10.5 gallons (40 liters) Net weight dry: 360 lbs (163 kg) Net weight filled with water: 535 lbs (243 kg) Exterior dimensions: 24.6”W x 82.2”H x 23.8”D (62.5cm W x 208.8cm H x 60.4cm D) Outer door gasket:  4 sided molded magnetic vinyl   Shelves: (capacity for 22 total) 17.8”W x 17.7” D Chamber heaters: 260 watt Electrical requirements: 90-180VAC, 50/60 Hz, 8A Temperature range: 5 deg C above ambient to 50 Degrees C Temperature control tolerance: +/-0.02 deg C at 37 deg C setpoint CO2 range: 0 to 20% CO2 control tolerance: better than +/- 0.1% Many more specifications are available in the very comprehensive user/service manual.  If you wish to know more detail about this unit, just send me your email address with this request and I would be happy to provide it for you. Buyer pays freight shipping cost.  This is in addition to the buy it now price I list or any best offer deal that is made. For no additional cost, shipping preparation will include fully covering the unit with cardboard panels and a layer of shrink-wrap.  Then strapping down securely to a pallet.  If more protection is desired than this, for an additional $150 a completely enclosed wooden crate will be constructed. Examples of freight cost are as follows.  If interested in this item, message me with the ship to zip code and I will quote freight shipping for you.  Also, unless you specify otherwise, I will assume shipping is to a truck accessible dock.  If you require lift gate delivery please say that, and also whether it would be to a business or residence as choice will affect price. Los Angeles 90001: $157 Portland  97212: $251 Milwaukee 53201: $220 New York 12201: $321 Miami 33101: $264 Be sure to check out my other listings for more great deals on lab equipment. Thanks for looking!
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes In great condition inside and out. Tested thoroughly, except for the CO2 monitoring system.

Directions

Similar products from Hatchers

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies