Fpga Cyclone Altera Learning Board Ep1c3t144 + Usb Blaster Jtag Programmer

US $59.00

Marcinowice, Poland
Jan 29th

Open on mobile:
QR code

Untitled Document FPGA Cyclone Altera FPGA EP1C3T144 Learning Board + USB Blaster JTAG programmer the main chip: using Altera's Cyclone series EP1C3T144 With 4 independent keys Four digital tube: Learning digital static and dynamic scanning display technology. Can do electronic clock, frequency counter, counters and other experiments ix LED lights: do flowing water lights and other lamp experiments, but also as a status display of a device Eight-way DIP switch: used to make two-way or multi-channel digital logic circuit experiment Clock: Use 50MHZ active clock Infrared receiver IC: receiver using VS1838 so doing infrared receiver experiment, scalable infrared remote control keypad Temperature sensor DS18B20 Interface: Learning "bus line,1-Wire" communications, do thermometer, temperature alarm device Buzzer: do experimental music accompaniment, alarm sounding and so on Serial processing MAX232: This as synchronous and asynchronous serial communications level converter, do synchronous and asynchronous serial communication experiment DS1302 clock modules: can be used to develop electronic clock, calendar with battery backup, so the clock kept forever With 16-pin LCD interface FPGA configuration module: use a large-capacity memory chips EPCS4, boards with reconfiguration button AS and JTAG download interface: You can download the program directly to the JTAG interface to the FPGA chip, or have the program downloaded to the AS-interface memory chip, to achieve power-down data is not lost IO expansion port: In addition to the development of the IO board module used, the card with pin leads 28 IO, can be extended to use other external devices Altera FPGA CPLD USB Blaster programmer: Fully compatible with original Altera USB-Blaster Supported target voltage : 2.0V-5.5V Support all ALTERA deveice CPLD:MAX 3000A?MAX 7000A?MAX 7000B?MAX 7000S?MAX 9000?MAX 9000A and MAX II FPGA:Stratix? Stratix II?Stratix GX?Cyclone?Cyclone II?Cyclone III?ACEX 1K?APEX II?APEX 20K?APEX 20KE?APEX 20KC?FLEX 10K?FLEX 10KE?FLEX 10KA?FLEX 6000? FLEX 8000?EPCS1?EPCS4?EPCS16?EPCS64,EPC1?EPC4?EPC8?EPC16< /li>Support:JTAG, AS, PS Mode Support NiosII embeded core based debug Supports Quartus II SignalTap® II Logic Analyzer (for logic analysis) High performance, 6 times faster than ByteBlasterII USB interface with status and Power LED Package include: 1 x USB Blaster JTAG programmer 1 x USB cable please note: the LCD no included.

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Country/Region of Manufacture

Poland